From: Takashi Iwai <tiwai@suse.de>
To: linux-sound@vger.kernel.org
Subject: [PATCH 04/14] ALSA: sgio2audio: Use guard() for spin locks
Date: Wed, 10 Sep 2025 13:09:19 +0200 [thread overview]
Message-ID: <20250910110932.15234-5-tiwai@suse.de> (raw)
In-Reply-To: <20250910110932.15234-1-tiwai@suse.de>
Clean up the code using guard() for spin locks.
Merely code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
sound/mips/sgio2audio.c | 20 +++++---------------
1 file changed, 5 insertions(+), 15 deletions(-)
diff --git a/sound/mips/sgio2audio.c b/sound/mips/sgio2audio.c
index 1af177f25c68..077fdf2181c1 100644
--- a/sound/mips/sgio2audio.c
+++ b/sound/mips/sgio2audio.c
@@ -103,9 +103,8 @@ static int read_ad1843_reg(void *priv, int reg)
{
struct snd_sgio2audio *chip = priv;
int val;
- unsigned long flags;
- spin_lock_irqsave(&chip->ad1843_lock, flags);
+ guard(spinlock_irqsave)(&chip->ad1843_lock);
writeq((reg << CODEC_CONTROL_ADDRESS_SHIFT) |
CODEC_CONTROL_READ, &mace->perif.audio.codec_control);
@@ -115,7 +114,6 @@ static int read_ad1843_reg(void *priv, int reg)
val = readq(&mace->perif.audio.codec_read);
- spin_unlock_irqrestore(&chip->ad1843_lock, flags);
return val;
}
@@ -126,9 +124,8 @@ static int write_ad1843_reg(void *priv, int reg, int word)
{
struct snd_sgio2audio *chip = priv;
int val;
- unsigned long flags;
- spin_lock_irqsave(&chip->ad1843_lock, flags);
+ guard(spinlock_irqsave)(&chip->ad1843_lock);
writeq((reg << CODEC_CONTROL_ADDRESS_SHIFT) |
(word << CODEC_CONTROL_WORD_SHIFT),
@@ -137,7 +134,6 @@ static int write_ad1843_reg(void *priv, int reg, int word)
val = readq(&mace->perif.audio.codec_control); /* flush bus */
udelay(200);
- spin_unlock_irqrestore(&chip->ad1843_lock, flags);
return 0;
}
@@ -351,10 +347,9 @@ static int snd_sgio2audio_dma_pull_frag(struct snd_sgio2audio *chip,
u64 *src;
s16 *dst;
u64 x;
- unsigned long flags;
struct snd_pcm_runtime *runtime = chip->channel[ch].substream->runtime;
- spin_lock_irqsave(&chip->channel[ch].lock, flags);
+ guard(spinlock_irqsave)(&chip->channel[ch].lock);
src_base = (unsigned long) chip->ring_base | (ch << CHANNEL_RING_SHIFT);
src_pos = readq(&mace->perif.audio.chan[ch].read_ptr);
@@ -383,7 +378,6 @@ static int snd_sgio2audio_dma_pull_frag(struct snd_sgio2audio *chip,
writeq(src_pos, &mace->perif.audio.chan[ch].read_ptr); /* in bytes */
chip->channel[ch].pos = dst_pos;
- spin_unlock_irqrestore(&chip->channel[ch].lock, flags);
return ret;
}
@@ -399,10 +393,9 @@ static int snd_sgio2audio_dma_push_frag(struct snd_sgio2audio *chip,
int src_pos;
u64 *dst;
s16 *src;
- unsigned long flags;
struct snd_pcm_runtime *runtime = chip->channel[ch].substream->runtime;
- spin_lock_irqsave(&chip->channel[ch].lock, flags);
+ guard(spinlock_irqsave)(&chip->channel[ch].lock);
dst_base = (unsigned long)chip->ring_base | (ch << CHANNEL_RING_SHIFT);
dst_pos = readq(&mace->perif.audio.chan[ch].write_ptr);
@@ -433,7 +426,6 @@ static int snd_sgio2audio_dma_push_frag(struct snd_sgio2audio *chip,
writeq(dst_pos, &mace->perif.audio.chan[ch].write_ptr); /* in bytes */
chip->channel[ch].pos = src_pos;
- spin_unlock_irqrestore(&chip->channel[ch].lock, flags);
return ret;
}
@@ -584,9 +576,8 @@ static int snd_sgio2audio_pcm_prepare(struct snd_pcm_substream *substream)
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_sgio2audio_chan *chan = substream->runtime->private_data;
int ch = chan->idx;
- unsigned long flags;
- spin_lock_irqsave(&chip->channel[ch].lock, flags);
+ guard(spinlock_irqsave)(&chip->channel[ch].lock);
/* Setup the pseudo-dma transfer pointers. */
chip->channel[ch].pos = 0;
@@ -610,7 +601,6 @@ static int snd_sgio2audio_pcm_prepare(struct snd_pcm_substream *substream)
runtime->channels);
break;
}
- spin_unlock_irqrestore(&chip->channel[ch].lock, flags);
return 0;
}
--
2.50.1
next prev parent reply other threads:[~2025-09-10 11:09 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-10 11:09 [PATCH RESEND 00/14] ALSA: Use guard() for spin locks (for the rest legacy stuff) Takashi Iwai
2025-09-10 11:09 ` [PATCH 01/14] ALSA: aoa: Use guard() for spin locks Takashi Iwai
2025-09-10 11:09 ` [PATCH 02/14] ALSA: aoa: Don't split string across lines Takashi Iwai
2025-09-10 11:09 ` [PATCH 03/14] ALSA: arm: Use guard() for spin locks Takashi Iwai
2025-09-10 11:09 ` Takashi Iwai [this message]
2025-09-10 11:09 ` [PATCH 05/14] ALSA: snd-n64: " Takashi Iwai
2025-09-10 11:09 ` [PATCH 06/14] ALSA: parisc: " Takashi Iwai
2025-09-10 11:09 ` [PATCH 07/14] ALSA: snd_ps3: " Takashi Iwai
2025-09-10 11:09 ` [PATCH 08/14] ALSA: ppc: " Takashi Iwai
2025-09-10 11:09 ` [PATCH 09/14] ALSA: line6: " Takashi Iwai
2025-09-10 11:09 ` [PATCH 10/14] ALSA: usb: fcp: " Takashi Iwai
2025-09-10 11:09 ` [PATCH 11/14] ALSA: usb-audio: " Takashi Iwai
2025-09-10 11:09 ` [PATCH 12/14] ALSA: sparc/amd7930: " Takashi Iwai
2025-09-10 11:09 ` [PATCH 13/14] ALSA: sparc/cs4231: " Takashi Iwai
2025-09-10 11:09 ` [PATCH 14/14] ALSA: sparc/dbri: " Takashi Iwai
-- strict thread matches above, loose matches on Subject: below --
2025-09-09 12:43 [PATCH 00/14] ALSA: Use guard() for spin locks (for the rest legacy stuff) Takashi Iwai
2025-09-09 12:43 ` [PATCH 04/14] ALSA: sgio2audio: Use guard() for spin locks Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250910110932.15234-5-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=linux-sound@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox