From: Simon Trimmer <simont@opensource.cirrus.com>
To: broonie@kernel.org
Cc: linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
patches@opensource.cirrus.com, Vijendar.Mukunda@amd.com,
Simon Trimmer <simont@opensource.cirrus.com>
Subject: [PATCH] ASoC: amd: acp: Add ACP7.0 match entries for cs35l56 and cs42l43
Date: Thu, 16 Oct 2025 15:08:37 +0000 [thread overview]
Message-ID: <20251016150837.320886-1-simont@opensource.cirrus.com> (raw)
This adds some match entries for a few system configurations:
cs42l43 link 0 UID 0
cs35l56 link 1 UID 0
cs35l56 link 1 UID 1
cs35l56 link 1 UID 2
cs35l56 link 1 UID 3
cs42l43 link 1 UID 0
cs35l56 link 1 UID 0
cs35l56 link 1 UID 1
cs35l56 link 1 UID 2
cs35l56 link 1 UID 3
cs35l56 link 1 UID 0
cs35l56 link 1 UID 1
cs35l56 link 1 UID 2
cs35l56 link 1 UID 3
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
---
sound/soc/amd/acp/amd-acp70-acpi-match.c | 157 +++++++++++++++++++++++
1 file changed, 157 insertions(+)
diff --git a/sound/soc/amd/acp/amd-acp70-acpi-match.c b/sound/soc/amd/acp/amd-acp70-acpi-match.c
index dcecac792e6d..871b4f054a84 100644
--- a/sound/soc/amd/acp/amd-acp70-acpi-match.c
+++ b/sound/soc/amd/acp/amd-acp70-acpi-match.c
@@ -30,6 +30,20 @@ static const struct snd_soc_acpi_endpoint spk_r_endpoint = {
.group_id = 1
};
+static const struct snd_soc_acpi_endpoint spk_2_endpoint = {
+ .num = 0,
+ .aggregated = 1,
+ .group_position = 2,
+ .group_id = 1
+};
+
+static const struct snd_soc_acpi_endpoint spk_3_endpoint = {
+ .num = 0,
+ .aggregated = 1,
+ .group_position = 3,
+ .group_id = 1
+};
+
static const struct snd_soc_acpi_adr_device rt711_rt1316_group_adr[] = {
{
.adr = 0x000030025D071101ull,
@@ -112,6 +126,134 @@ static const struct snd_soc_acpi_adr_device rt1320_1_single_adr[] = {
}
};
+static const struct snd_soc_acpi_endpoint cs42l43_endpoints[] = {
+ { /* Jack Playback Endpoint */
+ .num = 0,
+ .aggregated = 0,
+ .group_position = 0,
+ .group_id = 0,
+ },
+ { /* DMIC Capture Endpoint */
+ .num = 1,
+ .aggregated = 0,
+ .group_position = 0,
+ .group_id = 0,
+ },
+ { /* Jack Capture Endpoint */
+ .num = 2,
+ .aggregated = 0,
+ .group_position = 0,
+ .group_id = 0,
+ },
+ { /* Speaker Playback Endpoint */
+ .num = 3,
+ .aggregated = 0,
+ .group_position = 0,
+ .group_id = 0,
+ },
+};
+
+static const struct snd_soc_acpi_adr_device cs42l43_0_adr[] = {
+ {
+ .adr = 0x00003001FA424301ull,
+ .num_endpoints = ARRAY_SIZE(cs42l43_endpoints),
+ .endpoints = cs42l43_endpoints,
+ .name_prefix = "cs42l43"
+ }
+};
+
+static const struct snd_soc_acpi_adr_device cs42l43_1_cs35l56x4_1_adr[] = {
+ {
+ .adr = 0x00013001FA424301ull,
+ .num_endpoints = ARRAY_SIZE(cs42l43_endpoints),
+ .endpoints = cs42l43_endpoints,
+ .name_prefix = "cs42l43"
+ },
+ {
+ .adr = 0x00013001FA355601ull,
+ .num_endpoints = 1,
+ .endpoints = &spk_l_endpoint,
+ .name_prefix = "AMP1"
+ },
+ {
+ .adr = 0x00013101FA355601ull,
+ .num_endpoints = 1,
+ .endpoints = &spk_r_endpoint,
+ .name_prefix = "AMP2"
+ },
+ {
+ .adr = 0x00013201FA355601ull,
+ .num_endpoints = 1,
+ .endpoints = &spk_2_endpoint,
+ .name_prefix = "AMP3"
+ },
+ {
+ .adr = 0x00013301FA355601ull,
+ .num_endpoints = 1,
+ .endpoints = &spk_3_endpoint,
+ .name_prefix = "AMP4"
+ },
+};
+
+static const struct snd_soc_acpi_adr_device cs35l56x4_1_adr[] = {
+ {
+ .adr = 0x00013301FA355601ull,
+ .num_endpoints = 1,
+ .endpoints = &spk_l_endpoint,
+ .name_prefix = "AMP1"
+ },
+ {
+ .adr = 0x00013201FA355601ull,
+ .num_endpoints = 1,
+ .endpoints = &spk_r_endpoint,
+ .name_prefix = "AMP2"
+ },
+ {
+ .adr = 0x00013101FA355601ull,
+ .num_endpoints = 1,
+ .endpoints = &spk_2_endpoint,
+ .name_prefix = "AMP3"
+ },
+ {
+ .adr = 0x00013001FA355601ull,
+ .num_endpoints = 1,
+ .endpoints = &spk_3_endpoint,
+ .name_prefix = "AMP4"
+ },
+};
+
+static const struct snd_soc_acpi_link_adr acp70_cs42l43_l1_cs35l56x4_l1[] = {
+ {
+ .mask = BIT(1),
+ .num_adr = ARRAY_SIZE(cs42l43_1_cs35l56x4_1_adr),
+ .adr_d = cs42l43_1_cs35l56x4_1_adr,
+ },
+ {}
+};
+
+static const struct snd_soc_acpi_link_adr acp70_cs42l43_l0_cs35l56x4_l1[] = {
+ {
+ .mask = BIT(0),
+ .num_adr = ARRAY_SIZE(cs42l43_0_adr),
+ .adr_d = cs42l43_0_adr,
+ },
+ {
+ .mask = BIT(1),
+ .num_adr = ARRAY_SIZE(cs35l56x4_1_adr),
+ .adr_d = cs35l56x4_1_adr,
+ },
+ {}
+};
+
+static const struct snd_soc_acpi_link_adr acp70_cs35l56x4_l1[] = {
+ {
+ .mask = BIT(1),
+ .num_adr = ARRAY_SIZE(cs35l56x4_1_adr),
+ .adr_d = cs35l56x4_1_adr,
+ },
+ {}
+};
+
static const struct snd_soc_acpi_link_adr acp70_rt722_only[] = {
{
.mask = BIT(0),
@@ -151,6 +293,21 @@ struct snd_soc_acpi_mach snd_soc_acpi_amd_acp70_sdw_machines[] = {
.links = acp70_4_in_1_sdca,
.drv_name = "amd_sdw",
},
+ {
+ .link_mask = BIT(0) | BIT(1),
+ .links = acp70_cs42l43_l0_cs35l56x4_l1,
+ .drv_name = "amd_sdw",
+ },
+ {
+ .link_mask = BIT(1),
+ .links = acp70_cs42l43_l1_cs35l56x4_l1,
+ .drv_name = "amd_sdw",
+ },
+ {
+ .link_mask = BIT(1),
+ .links = acp70_cs35l56x4_l1,
+ .drv_name = "amd_sdw",
+ },
{},
};
EXPORT_SYMBOL(snd_soc_acpi_amd_acp70_sdw_machines);
--
2.43.0
next reply other threads:[~2025-10-16 15:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-16 15:08 Simon Trimmer [this message]
2025-10-21 11:37 ` [PATCH] ASoC: amd: acp: Add ACP7.0 match entries for cs35l56 and cs42l43 Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251016150837.320886-1-simont@opensource.cirrus.com \
--to=simont@opensource.cirrus.com \
--cc=Vijendar.Mukunda@amd.com \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox