From: Charles Keepax <ckeepax@opensource.cirrus.com>
To: broonie@kernel.org
Cc: yung-chuan.liao@linux.intel.com, pierre-louis.bossart@linux.dev,
peter.ujfalusi@linux.intel.com, shumingf@realtek.com,
lgirdwood@gmail.com, linux-sound@vger.kernel.org,
patches@opensource.cirrus.com
Subject: [PATCH v3 RESEND 17/19] ASoC: SDCA: Add UMP timeout handling for FDL
Date: Mon, 20 Oct 2025 16:55:10 +0100 [thread overview]
Message-ID: <20251020155512.353774-18-ckeepax@opensource.cirrus.com> (raw)
In-Reply-To: <20251020155512.353774-1-ckeepax@opensource.cirrus.com>
Several of the UMP transactions in the FDL process should timeout if the
device does not respond within a certain time, add handling into the UMP
helpers and the FDL code to handle this.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
Changes since v2:
- Add mutex to lock between UMP timeout work and IRQ handlers
- Clean up UMP timeout work after FDL fails
include/sound/sdca_fdl.h | 7 ++++++
include/sound/sdca_ump.h | 5 ++++
sound/soc/sdca/sdca_fdl.c | 50 ++++++++++++++++++++++++++++++++++++++-
sound/soc/sdca/sdca_ump.c | 15 ++++++++++++
4 files changed, 76 insertions(+), 1 deletion(-)
diff --git a/include/sound/sdca_fdl.h b/include/sound/sdca_fdl.h
index 4ea000d6acef4..f4ba809cb203a 100644
--- a/include/sound/sdca_fdl.h
+++ b/include/sound/sdca_fdl.h
@@ -11,6 +11,7 @@
#define __SDCA_FDL_H__
#include <linux/completion.h>
+#include <linux/workqueue.h>
struct device;
struct regmap;
@@ -23,13 +24,19 @@ struct sdca_interrupt_info;
* struct fdl_state - FDL state structure to keep data between interrupts
* @begin: Completion indicating the start of an FDL download cycle.
* @done: Completion indicating the end of an FDL download cycle.
+ * @timeout: Delayed work used for timing out UMP transactions.
+ * @lock: Mutex to protect between the timeout work and IRQ handlers.
+ * @interrupt: Pointer to the interrupt struct to which this FDL is attached.
* @set: Pointer to the FDL set currently being downloaded.
* @file_index: Index of the current file being processed.
*/
struct fdl_state {
struct completion begin;
struct completion done;
+ struct delayed_work timeout;
+ struct mutex lock;
+ struct sdca_interrupt *interrupt;
struct sdca_fdl_set *set;
int file_index;
};
diff --git a/include/sound/sdca_ump.h b/include/sound/sdca_ump.h
index b2363199d19aa..f54f9d48c64cb 100644
--- a/include/sound/sdca_ump.h
+++ b/include/sound/sdca_ump.h
@@ -15,6 +15,7 @@ struct sdca_control;
struct sdca_entity;
struct sdca_function_data;
struct snd_soc_component;
+struct delayed_work;
int sdca_ump_get_owner_host(struct device *dev,
struct regmap *function_regmap,
@@ -42,4 +43,8 @@ int sdca_ump_write_message(struct device *dev,
unsigned int length_sel,
void *msg, int msg_len);
+void sdca_ump_cancel_timeout(struct delayed_work *work);
+void sdca_ump_schedule_timeout(struct delayed_work *work,
+ unsigned int timeout_us);
+
#endif // __SDCA_UMP_H__
diff --git a/sound/soc/sdca/sdca_fdl.c b/sound/soc/sdca/sdca_fdl.c
index 39298314f69c9..cb79dc3131b82 100644
--- a/sound/soc/sdca/sdca_fdl.c
+++ b/sound/soc/sdca/sdca_fdl.c
@@ -116,7 +116,7 @@ int sdca_fdl_sync(struct device *dev, struct sdca_function_data *function,
done_timeout);
if (!time) {
dev_err(dev, "timed out waiting for FDL to complete\n");
- return -ETIMEDOUT;
+ goto error;
}
}
@@ -125,6 +125,25 @@ int sdca_fdl_sync(struct device *dev, struct sdca_function_data *function,
}
dev_err(dev, "too many FDL requests\n");
+
+error:
+ for (j = 0; j < SDCA_MAX_INTERRUPTS; j++) {
+ struct sdca_interrupt *interrupt = &info->irqs[j];
+ struct fdl_state *fdl_state;
+
+ if (interrupt->function != function ||
+ !interrupt->entity || !interrupt->control ||
+ interrupt->entity->type != SDCA_ENTITY_TYPE_XU ||
+ interrupt->control->sel != SDCA_CTL_XU_FDL_CURRENTOWNER)
+ continue;
+
+ disable_irq(interrupt->irq);
+
+ fdl_state = interrupt->priv;
+
+ sdca_ump_cancel_timeout(&fdl_state->timeout);
+ }
+
return -ETIMEDOUT;
}
EXPORT_SYMBOL_NS_GPL(sdca_fdl_sync, "SND_SOC_SDCA");
@@ -302,6 +321,21 @@ static void fdl_end(struct sdca_interrupt *interrupt)
dev_dbg(interrupt->dev, "completed FDL process\n");
}
+static void sdca_fdl_timeout_work(struct work_struct *work)
+{
+ struct fdl_state *fdl_state = container_of(work, struct fdl_state,
+ timeout.work);
+ struct sdca_interrupt *interrupt = fdl_state->interrupt;
+ struct device *dev = interrupt->dev;
+
+ dev_err(dev, "FDL transaction timed out\n");
+
+ guard(mutex)(&fdl_state->lock);
+
+ fdl_end(interrupt);
+ sdca_reset_function(dev, interrupt->function, interrupt->function_regmap);
+}
+
static int fdl_status_process(struct sdca_interrupt *interrupt, unsigned int status)
{
struct fdl_state *fdl_state = interrupt->priv;
@@ -364,15 +398,20 @@ int sdca_fdl_process(struct sdca_interrupt *interrupt)
{
struct device *dev = interrupt->dev;
struct sdca_entity_xu *xu = &interrupt->entity->xu;
+ struct fdl_state *fdl_state = interrupt->priv;
unsigned int reg, status;
int response, ret;
+ guard(mutex)(&fdl_state->lock);
+
ret = sdca_ump_get_owner_host(dev, interrupt->function_regmap,
interrupt->function, interrupt->entity,
interrupt->control);
if (ret)
goto reset_function;
+ sdca_ump_cancel_timeout(&fdl_state->timeout);
+
reg = SDW_SDCA_CTL(interrupt->function->desc->adr, interrupt->entity->id,
SDCA_CTL_XU_FDL_STATUS, 0);
ret = regmap_read(interrupt->function_regmap, reg, &status);
@@ -415,7 +454,13 @@ int sdca_fdl_process(struct sdca_interrupt *interrupt)
case SDCA_XU_RESET_FUNCTION:
goto reset_function;
}
+ case SDCA_CTL_XU_FDLH_COMPLETE:
+ if (status & SDCA_CTL_XU_FDLD_REQ_ABORT ||
+ status == SDCA_CTL_XU_FDLD_COMPLETE)
+ return 0;
+ fallthrough;
default:
+ sdca_ump_schedule_timeout(&fdl_state->timeout, xu->max_delay);
return 0;
}
@@ -441,8 +486,11 @@ int sdca_fdl_alloc_state(struct sdca_interrupt *interrupt)
if (!fdl_state)
return -ENOMEM;
+ INIT_DELAYED_WORK(&fdl_state->timeout, sdca_fdl_timeout_work);
init_completion(&fdl_state->begin);
init_completion(&fdl_state->done);
+ mutex_init(&fdl_state->lock);
+ fdl_state->interrupt = interrupt;
interrupt->priv = fdl_state;
diff --git a/sound/soc/sdca/sdca_ump.c b/sound/soc/sdca/sdca_ump.c
index 5dcad2f7ea05b..8aba3ff168728 100644
--- a/sound/soc/sdca/sdca_ump.c
+++ b/sound/soc/sdca/sdca_ump.c
@@ -245,3 +245,18 @@ int sdca_ump_write_message(struct device *dev,
return 0;
}
EXPORT_SYMBOL_NS_GPL(sdca_ump_write_message, "SND_SOC_SDCA");
+
+void sdca_ump_cancel_timeout(struct delayed_work *work)
+{
+ cancel_delayed_work_sync(work);
+}
+EXPORT_SYMBOL_NS_GPL(sdca_ump_cancel_timeout, "SND_SOC_SDCA");
+
+void sdca_ump_schedule_timeout(struct delayed_work *work, unsigned int timeout_us)
+{
+ if (!timeout_us)
+ return;
+
+ queue_delayed_work(system_wq, work, usecs_to_jiffies(timeout_us));
+}
+EXPORT_SYMBOL_NS_GPL(sdca_ump_schedule_timeout, "SND_SOC_SDCA");
--
2.47.3
next prev parent reply other threads:[~2025-10-20 15:55 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-20 15:54 [PATCH v3 RESEND 00/19] Add SDCA UMP/FDL support Charles Keepax
2025-10-20 15:54 ` [PATCH v3 RESEND 01/19] ASoC: SDCA: Rename SoundWire struct device variables Charles Keepax
2025-10-20 15:54 ` [PATCH v3 RESEND 02/19] regmap: sdw-mbq: Don't assume the regmap device is the SoundWire slave Charles Keepax
2025-10-20 15:54 ` [PATCH v3 RESEND 03/19] ASoC: SDCA: Add manual PM runtime gets to IRQ handlers Charles Keepax
2025-10-20 15:54 ` [PATCH v3 RESEND 04/19] ASoC: SDCA: Pass SoundWire slave to HID Charles Keepax
2025-10-20 15:54 ` [PATCH v3 RESEND 05/19] ASoC: SDCA: Pass device register map from IRQ alloc to handlers Charles Keepax
2025-10-20 15:54 ` [PATCH v3 RESEND 06/19] ASoC: SDCA: Update externally_requested flag to cover all requests Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 07/19] ASoC: SDCA: Factor out a helper to find SDCA IRQ data Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 08/19] ASoC: SDCA: Rely less on the ASoC component in IRQ handling Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 09/19] ASoC: SDCA: Force some SDCA Controls to be volatile Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 10/19] ASoC: SDCA: Parse XU Entity properties Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 11/19] ASoC: SDCA: Parse Function Reset max delay Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 12/19] ASoC: SDCA: Add UMP buffer helper functions Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 13/19] ASoC: SDCA: Add SDCA FDL data parsing Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 14/19] ASoC: SDCA: Add FDL library for XU entities Charles Keepax
2025-10-27 14:39 ` Pierre-Louis Bossart
2025-10-30 11:01 ` Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 15/19] ASoC: SDCA: Add FDL-specific IRQ processing Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 16/19] ASoC: SDCA: Add completion for FDL start and stop Charles Keepax
2025-10-20 15:55 ` Charles Keepax [this message]
2025-10-20 15:55 ` [PATCH v3 RESEND 18/19] ASoC: SDCA: Add early IRQ handling Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 19/19] ASoC: SDCA: Add HID button IRQ Charles Keepax
2025-10-27 14:43 ` [PATCH v3 RESEND 00/19] Add SDCA UMP/FDL support Pierre-Louis Bossart
2025-10-29 22:02 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251020155512.353774-18-ckeepax@opensource.cirrus.com \
--to=ckeepax@opensource.cirrus.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-sound@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=peter.ujfalusi@linux.intel.com \
--cc=pierre-louis.bossart@linux.dev \
--cc=shumingf@realtek.com \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).