From: Charles Keepax <ckeepax@opensource.cirrus.com>
To: broonie@kernel.org
Cc: yung-chuan.liao@linux.intel.com, pierre-louis.bossart@linux.dev,
peter.ujfalusi@linux.intel.com, shumingf@realtek.com,
lgirdwood@gmail.com, linux-sound@vger.kernel.org,
patches@opensource.cirrus.com
Subject: [PATCH v3 RESEND 03/19] ASoC: SDCA: Add manual PM runtime gets to IRQ handlers
Date: Mon, 20 Oct 2025 16:54:56 +0100 [thread overview]
Message-ID: <20251020155512.353774-4-ckeepax@opensource.cirrus.com> (raw)
In-Reply-To: <20251020155512.353774-1-ckeepax@opensource.cirrus.com>
SDCA interrupt handling is a bit odd, the SDCA IRQ registers are
defined on a device level but the handling of the IRQ is at the
Function level. As such the regmap IRQ's PM runtime operations need to
be on the device itself to ensure those registers are available but an
additional runtime get is required for the Function child when the IRQ
is actually handled. Add the required manual PM runtime gets.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
No changes since v2.
sound/soc/sdca/sdca_interrupts.c | 42 ++++++++++++++++++++++++--------
1 file changed, 32 insertions(+), 10 deletions(-)
diff --git a/sound/soc/sdca/sdca_interrupts.c b/sound/soc/sdca/sdca_interrupts.c
index 1926c0846846f..9295d283be910 100644
--- a/sound/soc/sdca/sdca_interrupts.c
+++ b/sound/soc/sdca/sdca_interrupts.c
@@ -11,7 +11,9 @@
#include <linux/bits.h>
#include <linux/cleanup.h>
#include <linux/device.h>
+#include <linux/dev_printk.h>
#include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/soundwire/sdw.h>
#include <linux/soundwire/sdw_registers.h>
@@ -86,18 +88,25 @@ static irqreturn_t function_status_handler(int irq, void *data)
{
struct sdca_interrupt *interrupt = data;
struct device *dev = interrupt->component->dev;
+ irqreturn_t irqret = IRQ_NONE;
unsigned int reg, val;
unsigned long status;
unsigned int mask;
int ret;
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0) {
+ dev_err(dev, "failed to resume for function status: %d\n", ret);
+ goto error;
+ }
+
reg = SDW_SDCA_CTL(interrupt->function->desc->adr, interrupt->entity->id,
interrupt->control->sel, 0);
ret = regmap_read(interrupt->component->regmap, reg, &val);
if (ret < 0) {
dev_err(dev, "failed to read function status: %d\n", ret);
- return IRQ_NONE;
+ goto error;
}
dev_dbg(dev, "function status: %#x\n", val);
@@ -130,10 +139,13 @@ static irqreturn_t function_status_handler(int irq, void *data)
ret = regmap_write(interrupt->component->regmap, reg, val);
if (ret < 0) {
dev_err(dev, "failed to clear function status: %d\n", ret);
- return IRQ_NONE;
+ goto error;
}
- return IRQ_HANDLED;
+ irqret = IRQ_HANDLED;
+error:
+ pm_runtime_put(dev);
+ return irqret;
}
static irqreturn_t detected_mode_handler(int irq, void *data)
@@ -146,21 +158,28 @@ static irqreturn_t detected_mode_handler(int irq, void *data)
struct snd_kcontrol *kctl = interrupt->priv;
struct snd_ctl_elem_value *ucontrol __free(kfree) = NULL;
struct soc_enum *soc_enum;
+ irqreturn_t irqret = IRQ_NONE;
unsigned int reg, val;
int ret;
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0) {
+ dev_err(dev, "failed to resume for detected mode: %d\n", ret);
+ goto error;
+ }
+
if (!kctl) {
const char *name __free(kfree) = kasprintf(GFP_KERNEL, "%s %s",
interrupt->entity->label,
SDCA_CTL_SELECTED_MODE_NAME);
if (!name)
- return IRQ_NONE;
+ goto error;
kctl = snd_soc_component_get_kcontrol(component, name);
if (!kctl) {
dev_dbg(dev, "control not found: %s\n", name);
- return IRQ_NONE;
+ goto error;
}
interrupt->priv = kctl;
@@ -174,7 +193,7 @@ static irqreturn_t detected_mode_handler(int irq, void *data)
ret = regmap_read(component->regmap, reg, &val);
if (ret < 0) {
dev_err(dev, "failed to read detected mode: %d\n", ret);
- return IRQ_NONE;
+ goto error;
}
switch (val) {
@@ -195,7 +214,7 @@ static irqreturn_t detected_mode_handler(int irq, void *data)
ret = regmap_read(component->regmap, reg, &val);
if (ret) {
dev_err(dev, "failed to re-check selected mode: %d\n", ret);
- return IRQ_NONE;
+ goto error;
}
break;
default:
@@ -206,7 +225,7 @@ static irqreturn_t detected_mode_handler(int irq, void *data)
ucontrol = kzalloc(sizeof(*ucontrol), GFP_KERNEL);
if (!ucontrol)
- return IRQ_NONE;
+ goto error;
ucontrol->value.enumerated.item[0] = snd_soc_enum_val_to_item(soc_enum, val);
@@ -215,12 +234,15 @@ static irqreturn_t detected_mode_handler(int irq, void *data)
up_write(rwsem);
if (ret < 0) {
dev_err(dev, "failed to update selected mode: %d\n", ret);
- return IRQ_NONE;
+ goto error;
}
snd_ctl_notify(card->snd_card, SNDRV_CTL_EVENT_MASK_VALUE, &kctl->id);
- return IRQ_HANDLED;
+ irqret = IRQ_HANDLED;
+error:
+ pm_runtime_put(dev);
+ return irqret;
}
static int sdca_irq_request_locked(struct device *dev,
--
2.47.3
next prev parent reply other threads:[~2025-10-20 15:55 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-20 15:54 [PATCH v3 RESEND 00/19] Add SDCA UMP/FDL support Charles Keepax
2025-10-20 15:54 ` [PATCH v3 RESEND 01/19] ASoC: SDCA: Rename SoundWire struct device variables Charles Keepax
2025-10-20 15:54 ` [PATCH v3 RESEND 02/19] regmap: sdw-mbq: Don't assume the regmap device is the SoundWire slave Charles Keepax
2025-10-20 15:54 ` Charles Keepax [this message]
2025-10-20 15:54 ` [PATCH v3 RESEND 04/19] ASoC: SDCA: Pass SoundWire slave to HID Charles Keepax
2025-10-20 15:54 ` [PATCH v3 RESEND 05/19] ASoC: SDCA: Pass device register map from IRQ alloc to handlers Charles Keepax
2025-10-20 15:54 ` [PATCH v3 RESEND 06/19] ASoC: SDCA: Update externally_requested flag to cover all requests Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 07/19] ASoC: SDCA: Factor out a helper to find SDCA IRQ data Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 08/19] ASoC: SDCA: Rely less on the ASoC component in IRQ handling Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 09/19] ASoC: SDCA: Force some SDCA Controls to be volatile Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 10/19] ASoC: SDCA: Parse XU Entity properties Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 11/19] ASoC: SDCA: Parse Function Reset max delay Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 12/19] ASoC: SDCA: Add UMP buffer helper functions Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 13/19] ASoC: SDCA: Add SDCA FDL data parsing Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 14/19] ASoC: SDCA: Add FDL library for XU entities Charles Keepax
2025-10-27 14:39 ` Pierre-Louis Bossart
2025-10-30 11:01 ` Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 15/19] ASoC: SDCA: Add FDL-specific IRQ processing Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 16/19] ASoC: SDCA: Add completion for FDL start and stop Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 17/19] ASoC: SDCA: Add UMP timeout handling for FDL Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 18/19] ASoC: SDCA: Add early IRQ handling Charles Keepax
2025-10-20 15:55 ` [PATCH v3 RESEND 19/19] ASoC: SDCA: Add HID button IRQ Charles Keepax
2025-10-27 14:43 ` [PATCH v3 RESEND 00/19] Add SDCA UMP/FDL support Pierre-Louis Bossart
2025-10-29 22:02 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251020155512.353774-4-ckeepax@opensource.cirrus.com \
--to=ckeepax@opensource.cirrus.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-sound@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=peter.ujfalusi@linux.intel.com \
--cc=pierre-louis.bossart@linux.dev \
--cc=shumingf@realtek.com \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).