From: Hsieh Hung-En <hungen3108@gmail.com>
To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
Hsieh Hung-En <hungen3108@gmail.com>
Subject: [PATCH] ASoC: es8328: Propagate error codes from regmap updates
Date: Fri, 16 Jan 2026 00:13:59 +0800 [thread overview]
Message-ID: <20260115161359.41979-1-hungen3108@gmail.com> (raw)
In es8328_hw_params(), the return value of
snd_soc_component_update_bits() was ignored. This could lead to silent
failures where the hardware is left in an inconsistent state if a
regmap write fails.
Check the return value of regmap updates and propagate any errors back
to the ALSA core. Return 0 on success to match the DAI ops convention.
Signed-off-by: Hsieh Hung-En <hungen3108@gmail.com>
---
sound/soc/codecs/es8328.c | 34 +++++++++++++++++++++++-----------
1 file changed, 23 insertions(+), 11 deletions(-)
diff --git a/sound/soc/codecs/es8328.c b/sound/soc/codecs/es8328.c
index bd74e896d602..38340f292282 100644
--- a/sound/soc/codecs/es8328.c
+++ b/sound/soc/codecs/es8328.c
@@ -461,6 +461,7 @@ static int es8328_hw_params(struct snd_pcm_substream *substream,
{
struct snd_soc_component *component = dai->component;
struct es8328_priv *es8328 = snd_soc_component_get_drvdata(component);
+ int ret;
int i;
int reg;
int wl;
@@ -494,9 +495,12 @@ static int es8328_hw_params(struct snd_pcm_substream *substream,
es8328->mclkdiv2 = 0;
}
- snd_soc_component_update_bits(component, ES8328_MASTERMODE,
- ES8328_MASTERMODE_MCLKDIV2,
- es8328->mclkdiv2 ? ES8328_MASTERMODE_MCLKDIV2 : 0);
+ ret = snd_soc_component_update_bits(component, ES8328_MASTERMODE,
+ ES8328_MASTERMODE_MCLKDIV2,
+ es8328->mclkdiv2 ?
+ ES8328_MASTERMODE_MCLKDIV2 : 0);
+ if (ret < 0)
+ return ret;
switch (params_width(params)) {
case 16:
@@ -519,18 +523,26 @@ static int es8328_hw_params(struct snd_pcm_substream *substream,
}
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- snd_soc_component_update_bits(component, ES8328_DACCONTROL1,
- ES8328_DACCONTROL1_DACWL_MASK,
- wl << ES8328_DACCONTROL1_DACWL_SHIFT);
+ ret = snd_soc_component_update_bits(component, ES8328_DACCONTROL1,
+ ES8328_DACCONTROL1_DACWL_MASK,
+ wl << ES8328_DACCONTROL1_DACWL_SHIFT);
+ if (ret < 0)
+ return ret;
es8328->playback_fs = params_rate(params);
es8328_set_deemph(component);
- } else
- snd_soc_component_update_bits(component, ES8328_ADCCONTROL4,
- ES8328_ADCCONTROL4_ADCWL_MASK,
- wl << ES8328_ADCCONTROL4_ADCWL_SHIFT);
+ } else {
+ ret = snd_soc_component_update_bits(component, ES8328_ADCCONTROL4,
+ ES8328_ADCCONTROL4_ADCWL_MASK,
+ wl << ES8328_ADCCONTROL4_ADCWL_SHIFT);
+ if (ret < 0)
+ return ret;
+ }
- return snd_soc_component_update_bits(component, reg, ES8328_RATEMASK, ratio);
+ ret = snd_soc_component_update_bits(component, reg, ES8328_RATEMASK, ratio);
+ if (ret < 0)
+ return ret;
+ return 0;
}
static int es8328_set_sysclk(struct snd_soc_dai *codec_dai,
--
2.34.1
next reply other threads:[~2026-01-15 16:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-15 16:13 Hsieh Hung-En [this message]
2026-01-16 13:22 ` [PATCH] ASoC: es8328: Propagate error codes from regmap updates Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260115161359.41979-1-hungen3108@gmail.com \
--to=hungen3108@gmail.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox