From: Sen Wang <sen@ti.com>
To: Mark Brown <broonie@kernel.org>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
Liam Girdwood <lgirdwood@gmail.com>,
"Rob Herring" <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: <linux-sound@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, Sen Wang <sen@ti.com>
Subject: [PATCH v2 1/2] dt-bindings: sound: simple-card: add system-clock-id property
Date: Fri, 15 May 2026 11:13:57 -0500 [thread overview]
Message-ID: <20260515161358.1462453-2-sen@ti.com> (raw)
In-Reply-To: <20260515161358.1462453-1-sen@ti.com>
Document the new optional "system-clock-id" u32 property for cpu/codec
sub-nodes in simple-audio-card and audio-graph-card.
The property maps directly to the clk_id argument of
snd_soc_dai_set_sysclk(). When absent the existing default of 0 is
used, so no existing DT is affected. CPU and codec sub-nodes are
parsed independently; each side may carry a different value to select
different clock sources on the two DAIs within the same dai-link.
Signed-off-by: Sen Wang <sen@ti.com>
---
changes in V2:
- Newly added (V1 is RFC)
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
index d1cbfc5edd3a..8094a76b9b4a 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
+++ b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
@@ -67,6 +67,8 @@ definitions:
$ref: simple-card.yaml#/definitions/system-clock-direction-out
system-clock-fixed:
$ref: simple-card.yaml#/definitions/system-clock-fixed
+ system-clock-id:
+ $ref: simple-card.yaml#/definitions/system-clock-id
dai-format:
description: audio format.
diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml
index a14716b2732f..47a02d340d5e 100644
--- a/Documentation/devicetree/bindings/sound/simple-card.yaml
+++ b/Documentation/devicetree/bindings/sound/simple-card.yaml
@@ -49,6 +49,14 @@ definitions:
single fixed sampling rate.
$ref: /schemas/types.yaml#/definitions/flag
+ system-clock-id:
+ description:
+ Selects which system clock to configure via set_sysclk(). Corresponds
+ to the clk_id argument of snd_soc_dai_set_sysclk(). When absent the
+ driver default (0) is used. CPU and codec sub-nodes are parsed
+ independently so each side may carry a different value.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
mclk-fs:
description: |
Multiplication factor between stream rate and codec mclk.
@@ -135,6 +143,8 @@ definitions:
$ref: "#/definitions/system-clock-direction-out"
system-clock-fixed:
$ref: "#/definitions/system-clock-fixed"
+ system-clock-id:
+ $ref: "#/definitions/system-clock-id"
required:
- sound-dai
next prev parent reply other threads:[~2026-05-15 16:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-15 16:13 [PATCH v2 0/2] ASoC: simple-card-utils: support system-clock-id DT property Sen Wang
2026-05-15 16:13 ` Sen Wang [this message]
2026-05-15 16:13 ` [PATCH v2 2/2] " Sen Wang
2026-05-15 19:32 ` [PATCH v2 0/2] " Wang, Sen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260515161358.1462453-2-sen@ti.com \
--to=sen@ti.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox