From: phucduc.bui@gmail.com
To: Srinivas Kandagatla <srini@kernel.org>, Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>,
linux-sound@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org,
bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH 9/9] ASoC: qcom: topology: Use guard() for mutex locks
Date: Wed, 3 Jun 2026 18:49:49 +0700 [thread overview]
Message-ID: <20260603114949.149595-10-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20260603114949.149595-1-phucduc.bui@gmail.com>
From: bui duc phuc <phucduc.bui@gmail.com>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
NOTE: This patch is compile-tested only.
sound/soc/qcom/qdsp6/topology.c | 71 +++++++++++++++------------------
1 file changed, 33 insertions(+), 38 deletions(-)
diff --git a/sound/soc/qcom/qdsp6/topology.c b/sound/soc/qcom/qdsp6/topology.c
index 1f69fba6de26..efbbebb8c6d3 100644
--- a/sound/soc/qcom/qdsp6/topology.c
+++ b/sound/soc/qcom/qdsp6/topology.c
@@ -32,9 +32,8 @@ static struct audioreach_graph_info *audioreach_tplg_alloc_graph_info(struct q6a
struct audioreach_graph_info *info;
int ret;
- mutex_lock(&apm->lock);
- info = idr_find(&apm->graph_info_idr, graph_id);
- mutex_unlock(&apm->lock);
+ scoped_guard(mutex, &apm->lock)
+ info = idr_find(&apm->graph_info_idr, graph_id);
if (info) {
*found = true;
@@ -48,9 +47,8 @@ static struct audioreach_graph_info *audioreach_tplg_alloc_graph_info(struct q6a
INIT_LIST_HEAD(&info->sg_list);
- mutex_lock(&apm->lock);
- ret = idr_alloc_u32(&apm->graph_info_idr, info, &graph_id, graph_id, GFP_KERNEL);
- mutex_unlock(&apm->lock);
+ scoped_guard(mutex, &apm->lock)
+ ret = idr_alloc_u32(&apm->graph_info_idr, info, &graph_id, graph_id, GFP_KERNEL);
if (ret < 0) {
dev_err(apm->dev, "Failed to allocate Graph ID (%x)\n", graph_id);
@@ -82,9 +80,8 @@ static struct audioreach_sub_graph *audioreach_tplg_alloc_sub_graph(struct q6apm
return ERR_PTR(-EINVAL);
/* Find if there is already a matching sub-graph */
- mutex_lock(&apm->lock);
- sg = idr_find(&apm->sub_graphs_idr, sub_graph_id);
- mutex_unlock(&apm->lock);
+ scoped_guard(mutex, &apm->lock)
+ sg = idr_find(&apm->sub_graphs_idr, sub_graph_id);
if (sg) {
*found = true;
@@ -98,9 +95,10 @@ static struct audioreach_sub_graph *audioreach_tplg_alloc_sub_graph(struct q6apm
INIT_LIST_HEAD(&sg->container_list);
- mutex_lock(&apm->lock);
- ret = idr_alloc_u32(&apm->sub_graphs_idr, sg, &sub_graph_id, sub_graph_id, GFP_KERNEL);
- mutex_unlock(&apm->lock);
+ scoped_guard(mutex, &apm->lock)
+ ret = idr_alloc_u32(&apm->sub_graphs_idr, sg,
+ &sub_graph_id, sub_graph_id,
+ GFP_KERNEL);
if (ret < 0) {
dev_err(apm->dev, "Failed to allocate Sub-Graph Instance ID (%x)\n", sub_graph_id);
@@ -124,9 +122,8 @@ static struct audioreach_container *audioreach_tplg_alloc_container(struct q6apm
if (!container_id)
return ERR_PTR(-EINVAL);
- mutex_lock(&apm->lock);
- cont = idr_find(&apm->containers_idr, container_id);
- mutex_unlock(&apm->lock);
+ scoped_guard(mutex, &apm->lock)
+ cont = idr_find(&apm->containers_idr, container_id);
if (cont) {
*found = true;
@@ -140,9 +137,10 @@ static struct audioreach_container *audioreach_tplg_alloc_container(struct q6apm
INIT_LIST_HEAD(&cont->modules_list);
- mutex_lock(&apm->lock);
- ret = idr_alloc_u32(&apm->containers_idr, cont, &container_id, container_id, GFP_KERNEL);
- mutex_unlock(&apm->lock);
+ scoped_guard(mutex, &apm->lock)
+ ret = idr_alloc_u32(&apm->containers_idr, cont,
+ &container_id, container_id,
+ GFP_KERNEL);
if (ret < 0) {
dev_err(apm->dev, "Failed to allocate Container Instance ID (%x)\n", container_id);
@@ -167,9 +165,8 @@ static struct audioreach_module *audioreach_tplg_alloc_module(struct q6apm *apm,
struct audioreach_module *mod;
int ret;
- mutex_lock(&apm->lock);
- mod = idr_find(&apm->modules_idr, module_id);
- mutex_unlock(&apm->lock);
+ scoped_guard(mutex, &apm->lock)
+ mod = idr_find(&apm->modules_idr, module_id);
if (mod) {
*found = true;
@@ -180,15 +177,17 @@ static struct audioreach_module *audioreach_tplg_alloc_module(struct q6apm *apm,
if (!mod)
return ERR_PTR(-ENOMEM);
- mutex_lock(&apm->lock);
- if (!module_id) { /* alloc module id dynamically */
- ret = idr_alloc_cyclic(&apm->modules_idr, mod,
- AR_MODULE_DYNAMIC_INSTANCE_ID_START,
- AR_MODULE_DYNAMIC_INSTANCE_ID_END, GFP_KERNEL);
- } else {
- ret = idr_alloc_u32(&apm->modules_idr, mod, &module_id, module_id, GFP_KERNEL);
+ scoped_guard(mutex, &apm->lock) {
+ if (!module_id) { /* alloc module id dynamically */
+ ret = idr_alloc_cyclic(&apm->modules_idr, mod,
+ AR_MODULE_DYNAMIC_INSTANCE_ID_START,
+ AR_MODULE_DYNAMIC_INSTANCE_ID_END, GFP_KERNEL);
+ } else {
+ ret = idr_alloc_u32(&apm->modules_idr, mod,
+ &module_id, module_id,
+ GFP_KERNEL);
+ }
}
- mutex_unlock(&apm->lock);
if (ret < 0) {
dev_err(apm->dev, "Failed to allocate Module Instance ID (%x)\n", module_id);
@@ -966,7 +965,7 @@ static int audioreach_widget_unload(struct snd_soc_component *scomp,
cont = mod->container;
- mutex_lock(&apm->lock);
+ guard(mutex)(&apm->lock);
idr_remove(&apm->modules_idr, mod->instance_id);
cont->num_modules--;
@@ -997,8 +996,6 @@ static int audioreach_widget_unload(struct snd_soc_component *scomp,
}
}
- mutex_unlock(&apm->lock);
-
return 0;
}
@@ -1106,9 +1103,8 @@ static void audioreach_connect_sub_graphs(struct q6apm *apm,
{
struct audioreach_graph_info *info;
- mutex_lock(&apm->lock);
- info = idr_find(&apm->graph_info_idr, m2->graph_id);
- mutex_unlock(&apm->lock);
+ scoped_guard(mutex, &apm->lock)
+ info = idr_find(&apm->graph_info_idr, m2->graph_id);
if (connect) {
info->src_mod_inst_id = m1->module_instance_id;
@@ -1130,9 +1126,8 @@ static bool audioreach_is_vmixer_connected(struct q6apm *apm,
{
const struct audioreach_graph_info *info;
- mutex_lock(&apm->lock);
- info = idr_find(&apm->graph_info_idr, m2->graph_id);
- mutex_unlock(&apm->lock);
+ scoped_guard(mutex, &apm->lock)
+ info = idr_find(&apm->graph_info_idr, m2->graph_id);
if (info->dst_mod_inst_id == m2->module_instance_id &&
info->src_mod_inst_id == m1->module_instance_id)
--
2.43.0
prev parent reply other threads:[~2026-06-03 11:50 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-03 11:49 [PATCH 0/9] ASoC: qcom: Use guard() for mutex & spin locks phucduc.bui
2026-06-03 11:49 ` [PATCH 1/9] ASoC: qcom: audioreach: Use guard() for mutex locks phucduc.bui
2026-06-03 11:49 ` [PATCH 2/9] ASoc: qcom: q6adm: Use guard() for mutex & spin locks phucduc.bui
2026-06-03 11:49 ` [PATCH 3/9] ASoc: qcom: q6afe: Use guard() for mutex locks phucduc.bui
2026-06-03 11:49 ` [PATCH 4/9] ASoC: qcom: q6apm: " phucduc.bui
2026-06-03 11:49 ` [PATCH 5/9] ASoC: qcom: q6asm: Use guard() for mutex & spin locks phucduc.bui
2026-06-03 11:49 ` [PATCH 6/9] ASoC: qdsp6: q6core: Use guard() for mutex locks phucduc.bui
2026-06-03 11:49 ` [PATCH 7/9] ASoC: qdsp6: q6routing: " phucduc.bui
2026-06-03 11:49 ` [PATCH 8/9] ASoC: qdsp6: q6usb: " phucduc.bui
2026-06-03 11:49 ` phucduc.bui [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260603114949.149595-10-phucduc.bui@gmail.com \
--to=phucduc.bui@gmail.com \
--cc=broonie@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=srini@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox