From: Sarath Ganapathiraju via B4 Relay <devnull+sarath.ganapathiraju.oss.qualcomm.com@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Brian Masney <bmasney@redhat.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-sound@vger.kernel.org, prasad.kumpatla@oss.qualcomm.com,
konrad.dybcio@oss.qualcomm.com,
Sarath Ganapathiraju <sarath.ganapathiraju@oss.qualcomm.com>
Subject: [PATCH v3 1/2] dt-bindings: clock: qcom: Add LPASS VA CSR HeartBeat pulse clock
Date: Thu, 23 Jul 2026 16:40:40 +0530 [thread overview]
Message-ID: <20260723-master-v3-1-3d67b79b0515@oss.qualcomm.com> (raw)
In-Reply-To: <20260723-master-v3-0-3d67b79b0515@oss.qualcomm.com>
From: Sarath Ganapathiraju <sarath.ganapathiraju@oss.qualcomm.com>
Add a binding for the Qualcomm LPASS VA CSR rate generator node that
exposes the lpass_heartbeat_pulse clock on hawi.
The HeartBeat Pulse (also known as RateGen Pulse) synchronizes the
start of the DMAs and Codec Interfaces for the audio usecase and can
serve as a periodic wakeup source for the DSP.
Signed-off-by: Sarath Ganapathiraju <sarath.ganapathiraju@oss.qualcomm.com>
---
.../bindings/clock/qcom,lpass-va-csr.yaml | 49 ++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/qcom,lpass-va-csr.yaml b/Documentation/devicetree/bindings/clock/qcom,lpass-va-csr.yaml
new file mode 100644
index 000000000000..b4bc33a86640
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,lpass-va-csr.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,lpass-va-csr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS VA CSR heartbeat pulse clock provider
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
+ - Sarath Ganapathiraju <sarath.ganapathiraju@oss.qualcomm.com>
+
+description:
+ The LPASS (Low Power Audio Subsystem) VA CSR block contains a rate
+ generator that produces a periodic HeartBeat Pulse, also known as
+ the RateGen Pulse. This pulse synchronizes the start of DMAs and
+ Codec Interfaces for audio usecases and can serve as a periodic
+ wakeup source for the DSP.
+
+properties:
+ compatible:
+ enum:
+ - qcom,hawi-lpass-va-csr
+
+ reg:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clock-controller@7ee0000 {
+ compatible = "qcom,hawi-lpass-va-csr";
+ reg = <0x0 0x07ee0000 0x0 0xe000>;
+ #clock-cells = <0>;
+ };
+ };
--
2.34.1
next prev parent reply other threads:[~2026-07-23 11:10 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-23 11:10 [PATCH v3 0/2] Add LPASS VA CSR HeartBeat pulse clock support Sarath Ganapathiraju via B4 Relay
2026-07-23 11:10 ` Sarath Ganapathiraju via B4 Relay [this message]
2026-07-24 6:28 ` [PATCH v3 1/2] dt-bindings: clock: qcom: Add LPASS VA CSR HeartBeat pulse clock Krzysztof Kozlowski
2026-07-23 11:10 ` [PATCH v3 2/2] clk: qcom: Add LPASS VA CSR heartbeat " Sarath Ganapathiraju via B4 Relay
-- strict thread matches above, loose matches on Subject: below --
2026-07-23 11:02 [PATCH v3 0/2] Add LPASS VA CSR HeartBeat pulse clock support Sarath Ganapathiraju
2026-07-23 11:02 ` [PATCH v3 1/2] dt-bindings: clock: qcom: Add LPASS VA CSR HeartBeat pulse clock Sarath Ganapathiraju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260723-master-v3-1-3d67b79b0515@oss.qualcomm.com \
--to=devnull+sarath.ganapathiraju.oss.qualcomm.com@kernel.org \
--cc=andersson@kernel.org \
--cc=bmasney@redhat.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=perex@perex.cz \
--cc=prasad.kumpatla@oss.qualcomm.com \
--cc=robh@kernel.org \
--cc=sarath.ganapathiraju@oss.qualcomm.com \
--cc=sboyd@kernel.org \
--cc=srinivas.kandagatla@oss.qualcomm.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox