From: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
To: lgirdwood@gmail.com, broonie@kernel.org
Cc: linux-sound@vger.kernel.org, kai.vehmanen@linux.intel.com,
yung-chuan.liao@linux.intel.com, pierre-louis.bossart@linux.dev,
liam.r.girdwood@intel.com
Subject: [PATCH 0/2] ASoC: SOF: Intel: hda/mtl: Handle powered on DSP on boot
Date: Thu, 30 Jul 2026 15:28:55 +0300 [thread overview]
Message-ID: <20260730122857.5294-1-peter.ujfalusi@linux.intel.com> (raw)
Hi,
It is expected that the DSP is in power down state when the firmware boot
is attempted.
If the DSP for any reason was left powered up then the DSP boot will
fail since the ROM boot sequence might not be able to run.
Make sure that the DSP is off before proceeding to boot it up.
We have seen reports that for some undetermined reasons the DSP was on
during system boot and this caused firmware boot failure as the DSP
cannot be booted up - it was already in booted up state.
Regards,
Peter
--
Peter Ujfalusi (2):
ASoC: SOF: Intel: hda: Power down DSP if it is left enabled in
pre_fw_run()
ASoC: SOF: Intel: mtl: Power down DSP if it is left enabled in
pre_fw_run()
sound/soc/sof/intel/hda.c | 14 ++++++++++++++
sound/soc/sof/intel/mtl.c | 23 +++++++++++++++++++++++
2 files changed, 37 insertions(+)
--
2.55.0
next reply other threads:[~2026-07-30 12:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-30 12:28 Peter Ujfalusi [this message]
2026-07-30 12:28 ` [PATCH 1/2] ASoC: SOF: Intel: hda: Power down DSP if it is left enabled in pre_fw_run() Peter Ujfalusi
2026-07-30 12:28 ` [PATCH 2/2] ASoC: SOF: Intel: mtl: " Peter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260730122857.5294-1-peter.ujfalusi@linux.intel.com \
--to=peter.ujfalusi@linux.intel.com \
--cc=broonie@kernel.org \
--cc=kai.vehmanen@linux.intel.com \
--cc=lgirdwood@gmail.com \
--cc=liam.r.girdwood@intel.com \
--cc=linux-sound@vger.kernel.org \
--cc=pierre-louis.bossart@linux.dev \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox