From: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
To: Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Oder Chiou <oder_chiou@realtek.com>,
Shuming Fan <shumingf@realtek.com>, Jack Yu <jack.yu@realtek.com>,
Derek Fang <derek.fang@realtek.com>
Cc: Bard Liao <yung-chuan.liao@linux.intel.com>,
linux-sound@vger.kernel.org, stable@vger.kernel.org
Subject: [PATCH 12/17] ASoC: rt715-sdca: sort the register default tables
Date: Wed, 5 Aug 2026 12:02:35 +0300 [thread overview]
Message-ID: <20260805090240.16991-13-peter.ujfalusi@linux.intel.com> (raw)
In-Reply-To: <20260805090240.16991-1-peter.ujfalusi@linux.intel.com>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352ba1 ("regcache: Add support for sorting defaults arrays").
Both tables group the entries by SDCA entity instead: in
rt715_reg_defaults_sdca[] the CX_CLK_SEL control is listed before the
ADC8_9, ADC10_11 and ADC7_27 mute controls (7 of 78 entries unreachable),
and in rt715_mbq_reg_defaults_sdca[] the AMIC_GAIN_EN CH_08 entry is listed
before the DMIC_GAIN_EN entries (1 of 32 entries unreachable).
regcache_reg_needs_sync() then cannot compare those against their default
and reports that a sync is needed, so they are written to the device on
every regcache_sync() even when they were never touched.
Sort both tables by register address.
Fixes: 20d17057f0a8 ("ASoC: rt715-sdca: Add RT715 sdca vendor-specific driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
---
sound/soc/codecs/rt715-sdca-sdw.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/rt715-sdca-sdw.h b/sound/soc/codecs/rt715-sdca-sdw.h
index 774762480195..d408f2d7d0f2 100644
--- a/sound/soc/codecs/rt715-sdca-sdw.h
+++ b/sound/soc/codecs/rt715-sdca-sdw.h
@@ -76,8 +76,6 @@ static const struct reg_default rt715_reg_defaults_sdca[] = {
{ 0x2f52, 0x01 },
{ 0x2f5a, 0x02 },
{ 0x2f5b, 0x05 },
- { SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_CX_CLK_SEL_EN,
- RT715_SDCA_CX_CLK_SEL_CTRL, CH_00), 0x1 },
{ SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_FU_ADC8_9_VOL,
RT715_SDCA_FU_MUTE_CTRL, CH_01), 0x01 },
{ SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_FU_ADC8_9_VOL,
@@ -98,6 +96,8 @@ static const struct reg_default rt715_reg_defaults_sdca[] = {
RT715_SDCA_FU_MUTE_CTRL, CH_01), 0x01 },
{ SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_FU_ADC7_27_VOL,
RT715_SDCA_FU_MUTE_CTRL, CH_02), 0x01 },
+ { SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_CX_CLK_SEL_EN,
+ RT715_SDCA_CX_CLK_SEL_CTRL, CH_00), 0x1 },
{ SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_SMPU_TRIG_ST_EN,
RT715_SDCA_SMPU_TRIG_EN_CTRL, CH_00), 0x02 },
{ SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_SMPU_TRIG_ST_EN,
@@ -145,8 +145,6 @@ static const struct reg_default rt715_mbq_reg_defaults_sdca[] = {
RT715_SDCA_FU_DMIC_GAIN_CTRL, CH_06), 0x00 },
{ SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_FU_AMIC_GAIN_EN,
RT715_SDCA_FU_DMIC_GAIN_CTRL, CH_07), 0x00 },
- { SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_FU_AMIC_GAIN_EN,
- RT715_SDCA_FU_DMIC_GAIN_CTRL, CH_08), 0x00 },
{ SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_FU_DMIC_GAIN_EN,
RT715_SDCA_FU_DMIC_GAIN_CTRL, CH_01), 0x00 },
{ SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_FU_DMIC_GAIN_EN,
@@ -161,6 +159,8 @@ static const struct reg_default rt715_mbq_reg_defaults_sdca[] = {
RT715_SDCA_FU_DMIC_GAIN_CTRL, CH_06), 0x00 },
{ SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_FU_DMIC_GAIN_EN,
RT715_SDCA_FU_DMIC_GAIN_CTRL, CH_07), 0x00 },
+ { SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_FU_AMIC_GAIN_EN,
+ RT715_SDCA_FU_DMIC_GAIN_CTRL, CH_08), 0x00 },
{ SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_FU_DMIC_GAIN_EN,
RT715_SDCA_FU_DMIC_GAIN_CTRL, CH_08), 0x00 },
};
--
2.55.0
next prev parent reply other threads:[~2026-08-05 9:02 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-05 9:02 [PATCH 00/17] ASoC: Realtek codecs: sort the reg_defaults tables Peter Ujfalusi
2026-08-05 9:02 ` [PATCH 01/17] ASoC: rt274: sort the register default table Peter Ujfalusi
2026-08-05 9:02 ` [PATCH 02/17] ASoC: rt286: " Peter Ujfalusi
2026-08-05 9:02 ` [PATCH 03/17] ASoC: rt298: " Peter Ujfalusi
2026-08-05 9:02 ` [PATCH 04/17] ASoC: rt700: drop duplicate reg_default entry Peter Ujfalusi
2026-08-05 9:02 ` [PATCH 05/17] ASoC: rt700: sort the register default table Peter Ujfalusi
2026-08-05 9:02 ` [PATCH 06/17] ASoC: rt711: " Peter Ujfalusi
2026-08-05 9:02 ` [PATCH 07/17] ASoC: rt711-sdca: sort the register default tables Peter Ujfalusi
2026-08-05 9:02 ` [PATCH 08/17] ASoC: rt712-sdca-dmic: sort the register default table Peter Ujfalusi
2026-08-05 9:02 ` [PATCH 09/17] ASoC: rt712-sdca-sdw: " Peter Ujfalusi
2026-08-05 9:02 ` [PATCH 10/17] ASoC: rt715: " Peter Ujfalusi
2026-08-05 9:02 ` [PATCH 11/17] ASoC: rt715-sdca: drop duplicate reg_default entries Peter Ujfalusi
2026-08-05 9:02 ` Peter Ujfalusi [this message]
2026-08-05 9:02 ` [PATCH 13/17] ASoC: rt721-sdca-sdw: sort the register default table Peter Ujfalusi
2026-08-05 9:02 ` [PATCH 14/17] ASoC: rt1017-sdca-sdw: " Peter Ujfalusi
2026-08-05 9:02 ` [PATCH 15/17] ASoC: rt1316-sdw: " Peter Ujfalusi
2026-08-05 9:02 ` [PATCH 16/17] ASoC: rt1318: " Peter Ujfalusi
2026-08-05 9:02 ` [PATCH 17/17] ASoC: rt1318-sdw: " Peter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260805090240.16991-13-peter.ujfalusi@linux.intel.com \
--to=peter.ujfalusi@linux.intel.com \
--cc=broonie@kernel.org \
--cc=derek.fang@realtek.com \
--cc=jack.yu@realtek.com \
--cc=lgirdwood@gmail.com \
--cc=linux-sound@vger.kernel.org \
--cc=oder_chiou@realtek.com \
--cc=shumingf@realtek.com \
--cc=stable@vger.kernel.org \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox