From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Bo Shen <voice.shen@atmel.com>
Cc: Joachim Eastwood <manabian@gmail.com>,
plagnioj@jcrosoft.com, broonie@opensource.wolfsonmicro.com,
linux-arm-kernel@lists.infradead.org,
alsa-devel@alsa-project.org, linux-sound@vger.kernel.org
Subject: Re: [PATCH] ASoC: atmel-soc: make it buildable on other architectures
Date: Mon, 10 Dec 2012 10:04:43 +0000 [thread overview]
Message-ID: <50C5B3BB.6070700@atmel.com> (raw)
In-Reply-To: <50C5B14C.4050107@atmel.com>
On 12/10/2012 10:54 AM, Bo Shen :
> Hi Joachim Eastwood,
>
> On 12/8/2012 21:23, Joachim Eastwood wrote:
>> Not very useful on non AT91/AVR32 platforms but it provides
>> more build coverage and prepares for ARM multiplatform.
>>
>> Also fixes a couple of format type warnings.
>>
>> Signed-off-by: Joachim Eastwood <manabian@gmail.com>
>> ---
>>
>> Hi,
>>
>> Build tested on RM9200 and x86_64.
>>
>> ARCH_AT91 depend is pushed down to the machine drivers
>> since they still relies on mach includes.
>>
>> regards
>> Joachim Eastwood
>>
>> sound/soc/atmel/Kconfig | 6 +++---
>> sound/soc/atmel/atmel-pcm-pdc.c | 4 ++--
>> sound/soc/atmel/atmel-pcm.c | 2 +-
>> sound/soc/atmel/atmel_ssc_dai.c | 2 --
>> 4 files changed, 6 insertions(+), 8 deletions(-)
>>
>> diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
>> index d1b691b..3fdd87f 100644
>> --- a/sound/soc/atmel/Kconfig
>> +++ b/sound/soc/atmel/Kconfig
>> @@ -1,6 +1,6 @@
>> config SND_ATMEL_SOC
>> tristate "SoC Audio for the Atmel System-on-Chip"
>> - depends on ARCH_AT91
>> + depends on HAS_IOMEM
>
> I don't think this change needed. This is not a physical device.
It is needed to prevent the restriction of this driver to AT91 only.
This move is interesting for build coverage and ARM multiplatform as
indicated by Joachim.
Bye,
>> help
>> Say Y or M if you want to add support for codecs attached to
>> the ATMEL SSC interface. You will also need
>> @@ -24,7 +24,7 @@ config SND_ATMEL_SOC_SSC
>>
>> config SND_AT91_SOC_SAM9G20_WM8731
>> tristate "SoC Audio support for WM8731-based At91sam9g20
>> evaluation board"
>> - depends on ATMEL_SSC && SND_ATMEL_SOC && AT91_PROGRAMMABLE_CLOCKS
>> + depends on ARCH_AT91 && ATMEL_SSC && SND_ATMEL_SOC &&
>> AT91_PROGRAMMABLE_CLOCKS
>> select SND_ATMEL_SOC_PDC
>> select SND_ATMEL_SOC_SSC
>> select SND_SOC_WM8731
>> @@ -34,7 +34,7 @@ config SND_AT91_SOC_SAM9G20_WM8731
>>
>> config SND_AT91_SOC_AFEB9260
>> tristate "SoC Audio support for AFEB9260 board"
>> - depends on ATMEL_SSC && ARCH_AT91 && MACH_AFEB9260 && SND_ATMEL_SOC
>> + depends on ARCH_AT91 && ATMEL_SSC && ARCH_AT91 && MACH_AFEB9260
>> && SND_ATMEL_SOC
>> select SND_ATMEL_SOC_PDC
>> select SND_ATMEL_SOC_SSC
>> select SND_SOC_TLV320AIC23
>> diff --git a/sound/soc/atmel/atmel-pcm-pdc.c
>> b/sound/soc/atmel/atmel-pcm-pdc.c
>> index 6a293c7..054ea4d 100644
>> --- a/sound/soc/atmel/atmel-pcm-pdc.c
>> +++ b/sound/soc/atmel/atmel-pcm-pdc.c
>> @@ -159,7 +159,7 @@ static int atmel_pcm_hw_params(struct
>> snd_pcm_substream *substream,
>>
>> pr_debug("atmel-pcm: "
>> "hw_params: DMA for %s initialized "
>> - "(dma_bytes=%u, period_size=%u)\n",
>> + "(dma_bytes=%zu, period_size=%zu)\n",
>> prtd->params->name,
>> runtime->dma_bytes,
>> prtd->period_size);
>> @@ -201,7 +201,7 @@ static int atmel_pcm_trigger(struct
>> snd_pcm_substream *substream,
>> int ret = 0;
>>
>> pr_debug("atmel-pcm:buffer_size = %ld,"
>> - "dma_area = %p, dma_bytes = %u\n",
>> + "dma_area = %p, dma_bytes = %zu\n",
>> rtd->buffer_size, rtd->dma_area, rtd->dma_bytes);
>>
>> switch (cmd) {
>> diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c
>> index e99f181..3109db7 100644
>> --- a/sound/soc/atmel/atmel-pcm.c
>> +++ b/sound/soc/atmel/atmel-pcm.c
>> @@ -49,7 +49,7 @@ static int atmel_pcm_preallocate_dma_buffer(struct
>> snd_pcm *pcm,
>> buf->private_data = NULL;
>> buf->area = dma_alloc_coherent(pcm->card->dev, size,
>> &buf->addr, GFP_KERNEL);
>> - pr_debug("atmel-pcm: alloc dma buffer: area=%p, addr=%p, size=%d\n",
>> + pr_debug("atmel-pcm: alloc dma buffer: area=%p, addr=%p,
>> size=%zu\n",
>> (void *)buf->area, (void *)buf->addr, size);
>>
>> if (!buf->area)
>> diff --git a/sound/soc/atmel/atmel_ssc_dai.c
>> b/sound/soc/atmel/atmel_ssc_dai.c
>> index 1c76634..2755750 100644
>> --- a/sound/soc/atmel/atmel_ssc_dai.c
>> +++ b/sound/soc/atmel/atmel_ssc_dai.c
>> @@ -42,8 +42,6 @@
>> #include <sound/initval.h>
>> #include <sound/soc.h>
>>
>> -#include <mach/hardware.h>
>> -
>> #include "atmel-pcm.h"
>> #include "atmel_ssc_dai.h"
>>
>>
>
>
>
--
Nicolas Ferre
next prev parent reply other threads:[~2012-12-10 10:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-08 13:23 [PATCH] ASoC: atmel-soc: make it buildable on other architectures Joachim Eastwood
2012-12-10 9:54 ` Bo Shen
2012-12-10 10:04 ` Nicolas Ferre [this message]
2012-12-13 11:21 ` Nicolas Ferre
2012-12-24 15:49 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50C5B3BB.6070700@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-sound@vger.kernel.org \
--cc=manabian@gmail.com \
--cc=plagnioj@jcrosoft.com \
--cc=voice.shen@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox