From: Richard Fitzgerald <rf@opensource.cirrus.com>
To: Stefan Binding <sbinding@opensource.cirrus.com>,
Mark Brown <broonie@kernel.org>
Cc: linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
patches@opensource.cirrus.com
Subject: Re: [PATCH v1 1/5] ASoC: cs35l56: Add Index based on ACPI HID or SDW ID to select regmap config
Date: Mon, 28 Apr 2025 18:32:37 +0100 [thread overview]
Message-ID: <71c5516f-371f-4776-a686-c231b46238b8@opensource.cirrus.com> (raw)
In-Reply-To: <20250407151842.143393-2-sbinding@opensource.cirrus.com>
On 7/4/25 16:16, Stefan Binding wrote:
> This is to prepare for further products using slightly different
> regmap configs.
>
> Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
> ---
> sound/soc/codecs/cs35l56-i2c.c | 16 +++++++++++++---
> sound/soc/codecs/cs35l56-sdw.c | 16 +++++++++++++---
> 2 files changed, 26 insertions(+), 6 deletions(-)
>
> diff --git a/sound/soc/codecs/cs35l56-i2c.c b/sound/soc/codecs/cs35l56-i2c.c
> index 8a518df1e16e..5962914e2180 100644
> --- a/sound/soc/codecs/cs35l56-i2c.c
> +++ b/sound/soc/codecs/cs35l56-i2c.c
> @@ -17,9 +17,10 @@
>
> static int cs35l56_i2c_probe(struct i2c_client *client)
> {
> + unsigned int id = (u32)(uintptr_t)i2c_get_match_data(client);
> struct cs35l56_private *cs35l56;
> struct device *dev = &client->dev;
> - const struct regmap_config *regmap_config = &cs35l56_regmap_i2c;
> + const struct regmap_config *regmap_config;
> int ret;
>
> cs35l56 = devm_kzalloc(dev, sizeof(struct cs35l56_private), GFP_KERNEL);
> @@ -30,6 +31,15 @@ static int cs35l56_i2c_probe(struct i2c_client *client)
> cs35l56->base.can_hibernate = true;
>
> i2c_set_clientdata(client, cs35l56);
> +
> + switch (id) {
> + case 0x3556:
> + regmap_config = &cs35l56_regmap_i2c;
> + break;
> + default:
> + return -ENODEV;
> + }
> +
> cs35l56->base.regmap = devm_regmap_init_i2c(client, regmap_config);
> if (IS_ERR(cs35l56->base.regmap)) {
> ret = PTR_ERR(cs35l56->base.regmap);
> @@ -57,14 +67,14 @@ static void cs35l56_i2c_remove(struct i2c_client *client)
> }
>
> static const struct i2c_device_id cs35l56_id_i2c[] = {
> - { "cs35l56" },
> + { "cs35l56", 0x3556 },
> {}
> };
> MODULE_DEVICE_TABLE(i2c, cs35l56_id_i2c);
>
> #ifdef CONFIG_ACPI
> static const struct acpi_device_id cs35l56_asoc_acpi_match[] = {
> - { "CSC355C", 0 },
> + { "CSC355C", 0x3556 },
> {},
> };
> MODULE_DEVICE_TABLE(acpi, cs35l56_asoc_acpi_match);
> diff --git a/sound/soc/codecs/cs35l56-sdw.c b/sound/soc/codecs/cs35l56-sdw.c
> index 3f91cb3f9ae7..d178357e1196 100644
> --- a/sound/soc/codecs/cs35l56-sdw.c
> +++ b/sound/soc/codecs/cs35l56-sdw.c
> @@ -509,6 +509,7 @@ static int cs35l56_sdw_probe(struct sdw_slave *peripheral, const struct sdw_devi
> {
> struct device *dev = &peripheral->dev;
> struct cs35l56_private *cs35l56;
> + const struct regmap_config *regmap_config;
> int ret;
>
> cs35l56 = devm_kzalloc(dev, sizeof(*cs35l56), GFP_KERNEL);
> @@ -521,8 +522,17 @@ static int cs35l56_sdw_probe(struct sdw_slave *peripheral, const struct sdw_devi
>
> dev_set_drvdata(dev, cs35l56);
>
> + switch ((unsigned int)id->driver_data) {
> + case 0x3556:
> + case 0x3557:
> + regmap_config = &cs35l56_regmap_sdw;
> + break;
> + default:
> + return -ENODEV;
> + }
> +
> cs35l56->base.regmap = devm_regmap_init(dev, &cs35l56_regmap_bus_sdw,
> - peripheral, &cs35l56_regmap_sdw);
> + peripheral, regmap_config);
> if (IS_ERR(cs35l56->base.regmap)) {
> ret = PTR_ERR(cs35l56->base.regmap);
> return dev_err_probe(dev, ret, "Failed to allocate register map\n");
> @@ -562,8 +572,8 @@ static const struct dev_pm_ops cs35l56_sdw_pm = {
> };
>
> static const struct sdw_device_id cs35l56_sdw_id[] = {
> - SDW_SLAVE_ENTRY(0x01FA, 0x3556, 0),
> - SDW_SLAVE_ENTRY(0x01FA, 0x3557, 0),
> + SDW_SLAVE_ENTRY(0x01FA, 0x3556, 0x3556),
> + SDW_SLAVE_ENTRY(0x01FA, 0x3557, 0x3557),
> {},
> };
> MODULE_DEVICE_TABLE(sdw, cs35l56_sdw_id);
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
next prev parent reply other threads:[~2025-04-28 17:32 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-07 15:16 [PATCH v1 0/5] Add support for CS35L63 Smart Amplifier Stefan Binding
2025-04-07 15:16 ` [PATCH v1 1/5] ASoC: cs35l56: Add Index based on ACPI HID or SDW ID to select regmap config Stefan Binding
2025-04-28 17:32 ` Richard Fitzgerald [this message]
2025-04-07 15:16 ` [PATCH v1 2/5] ASoC: cs35l56: Add struct to index firmware registers Stefan Binding
2025-04-07 19:16 ` Mark Brown
2025-04-08 12:58 ` Richard Fitzgerald
2025-04-08 16:00 ` Mark Brown
2025-04-09 11:33 ` Richard Fitzgerald
2025-04-09 12:31 ` Mark Brown
2025-04-28 17:34 ` Richard Fitzgerald
2025-05-05 23:46 ` Mark Brown
2025-04-07 15:16 ` [PATCH v1 3/5] ASoC: cs35l56: Add Mute, Volume and Posture registers to firmware register list Stefan Binding
2025-04-28 17:36 ` Richard Fitzgerald
2025-04-07 15:16 ` [PATCH v1 4/5] ASoC: cs35l56: Add initial support for CS35L63 for I2C and SoundWire Stefan Binding
2025-04-28 17:38 ` Richard Fitzgerald
2025-04-07 15:16 ` [PATCH v1 5/5] ASoC: cs35l56: Read Silicon ID from DIE_STS registers for CS35L63 Stefan Binding
2025-04-28 17:39 ` Richard Fitzgerald
2025-05-07 11:12 ` [PATCH v1 0/5] Add support for CS35L63 Smart Amplifier Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=71c5516f-371f-4776-a686-c231b46238b8@opensource.cirrus.com \
--to=rf@opensource.cirrus.com \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=sbinding@opensource.cirrus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox