From: Takashi Iwai <tiwai@suse.de>
To: linux-sound@vger.kernel.org
Subject: Re: [PATCH] ALSA: seq: Improve UMP SysEx packing
Date: Wed, 26 Jun 2024 18:52:27 +0200 [thread overview]
Message-ID: <8734ozir3o.wl-tiwai@suse.de> (raw)
In-Reply-To: <20240626161017.9479-1-tiwai@suse.de>
On Wed, 26 Jun 2024 18:10:15 +0200,
Takashi Iwai wrote:
>
> The initial implementation of 7bit SysEx message conversion to UMP did
> a trick to deal with the first SysEx start byte (0xf7). The converter
> trims it and sends the first packet with the content of 5 bytes.
> Although this is valid and should work, it's not ideal and a bit
> confusing as if something goes wrong.
>
> This patch improves the handling to try filling always 6 bytes in the
> package.
>
> Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Scratch this one. It won't work properly when the sysex message is
split. Will rework on it.
Takashi
> ---
> sound/core/seq/seq_ump_convert.c | 48 +++++++++++++++++++-------------
> 1 file changed, 28 insertions(+), 20 deletions(-)
>
> diff --git a/sound/core/seq/seq_ump_convert.c b/sound/core/seq/seq_ump_convert.c
> index e90b27a135e6..952e64c499dd 100644
> --- a/sound/core/seq/seq_ump_convert.c
> +++ b/sound/core/seq/seq_ump_convert.c
> @@ -1192,7 +1192,7 @@ static int cvt_sysex_to_ump(struct snd_seq_client *dest,
> {
> struct snd_seq_ump_event ev_cvt;
> unsigned char status;
> - u8 buf[6], *xbuf;
> + u8 buf[6];
> int offset = 0;
> int len, err;
>
> @@ -1200,36 +1200,44 @@ static int cvt_sysex_to_ump(struct snd_seq_client *dest,
> return 0;
>
> setup_ump_event(&ev_cvt, event);
> + len = 0;
> + status = UMP_SYSEX_STATUS_START;
> for (;;) {
> - len = snd_seq_expand_var_event_at(event, sizeof(buf), buf, offset);
> - if (len <= 0)
> + err = snd_seq_expand_var_event_at(event, sizeof(buf) - len,
> + buf + len, offset);
> + if (err < 0)
> + break;
> + len += err;
> + if (!len)
> break;
> if (WARN_ON(len > 6))
> break;
> - offset += len;
> - xbuf = buf;
> - if (*xbuf == UMP_MIDI1_MSG_SYSEX_START) {
> - status = UMP_SYSEX_STATUS_START;
> - xbuf++;
> + offset += err;
> + if (status == UMP_SYSEX_STATUS_START &&
> + buf[0] == UMP_MIDI1_MSG_SYSEX_START) {
> len--;
> - if (len > 0 && xbuf[len - 1] == UMP_MIDI1_MSG_SYSEX_END) {
> - status = UMP_SYSEX_STATUS_SINGLE;
> - len--;
> - }
> - } else {
> - if (xbuf[len - 1] == UMP_MIDI1_MSG_SYSEX_END) {
> - status = UMP_SYSEX_STATUS_END;
> - len--;
> - } else {
> - status = UMP_SYSEX_STATUS_CONTINUE;
> - }
> + memmove(buf, buf + 1, len);
> + continue; /* fill one more byte */
> }
> - fill_sysex7_ump(dest_port, ev_cvt.ump, status, xbuf, len);
> + if (buf[len - 1] == UMP_MIDI1_MSG_SYSEX_END) {
> + len--;
> + if (status == UMP_SYSEX_STATUS_START)
> + status = UMP_SYSEX_STATUS_SINGLE;
> + else
> + status = UMP_SYSEX_STATUS_END;
> + }
> + fill_sysex7_ump(dest_port, ev_cvt.ump, status, buf, len);
> err = __snd_seq_deliver_single_event(dest, dest_port,
> (struct snd_seq_event *)&ev_cvt,
> atomic, hop);
> if (err < 0)
> return err;
> +
> + if (status == UMP_SYSEX_STATUS_START)
> + status = UMP_SYSEX_STATUS_CONTINUE;
> + else if (status != UMP_SYSEX_STATUS_CONTINUE)
> + break;
> + len = 0; /* reset filling */
> }
> return 0;
> }
> --
> 2.43.0
>
prev parent reply other threads:[~2024-06-26 16:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-26 16:10 [PATCH] ALSA: seq: Improve UMP SysEx packing Takashi Iwai
2024-06-26 16:52 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8734ozir3o.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=linux-sound@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox