From: Takashi Iwai <tiwai@suse.de>
To: Heiko S <heiko@future-machines.org>
Cc: Takashi Iwai <tiwai@suse.de>,
"linux-sound@vger.kernel.org" <linux-sound@vger.kernel.org>,
"tiwai@suse.com" <tiwai@suse.com>,
"perex@perex.cz" <perex@perex.cz>
Subject: Re: [PATCH] ALSA: hda: Fix SSID detection for HP Dragonfly Folio G3
Date: Fri, 15 May 2026 12:48:28 +0200 [thread overview]
Message-ID: <874ik9t0cj.wl-tiwai@suse.de> (raw)
In-Reply-To: <04D6DA87-AFD0-44CA-800E-0BA15BEAEA61@getmailspring.com>
On Fri, 15 May 2026 12:46:11 +0200,
Heiko S wrote:
>
>
> Tested-by: Heiko Schmid heiko@future-machines.org
>
> Confirmed working on HP Dragonfly Folio 13.5 inch G3 with Fedora 44, kernel
> 6.19.14.
Thanks for quick testing. I'm going to submit a proper patch.
Takashi
>
> Dr. Heiko Schmid
> http://www.future-machines.org
> On Mai 15 2026, at 11:03 am, Takashi Iwai <tiwai@suse.de> wrote:
>
> On Thu, 14 May 2026 15:31:10 +0200,
> Heiko Schmid wrote:
> >
> > The HP Dragonfly Folio 13.5 inch G3 (PCI SSID 103c:8a05/8a06) BIOS does
> > not program the PCI subsystem ID correctly when the SOF audio driver is
> > used. This causes the codec fixup lookup to fail as the PCI SSID reads
> > as 0x0000:0x0000 instead of the correct 103c:8a06.
> >
> > Fix this by falling back to the codec SSID when the PCI SSID is zero,
> > and add the device-specific quirk entry for the HP Dragonfly Folio G3.
> >
> > Signed-off-by: Heiko Schmid <heiko@future-machines.org>
>
> I think the idea is good, but we don't have to restrict to both PCI
> vendor and device being 0; PCI device 0 is used for wildcard, and
> can't work in anyway.
>
> About the patch:
>
> > ---
> > sound/hda/codecs/realtek/alc269.c | 2 ++
> > sound/hda/common/auto_parser.c | 10 ++++++++++
> > 2 files changed, 12 insertions(+)
> >
> > diff --git a/sound/hda/codecs/realtek/alc269.c b/sound/hda/codecs/
> realtek/alc269.c
> > index 22b2f67..494dd0a 100644
> > --- a/sound/hda/codecs/realtek/alc269.c
> > +++ b/sound/hda/codecs/realtek/alc269.c
> > @@ -6990,6 +6990,8 @@ static const struct hda_quirk alc269_fixup_tbl[] =
> {
> > SND_PCI_QUIRK(0x103c, 0x89ae, "HP EliteBook 650 G9",
> ALC236_FIXUP_HP_GPIO_LED),
> > SND_PCI_QUIRK(0x103c, 0x89c0, "HP ZBook Power 15.6 G9",
> ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED),
> > SND_PCI_QUIRK(0x103c, 0x8a06, "HP Dragonfly Folio 13.5 G3",
> ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED),
> > + SND_PCI_QUIRK(0x103c, 0x8a06, "HP Dragonfly Folio 13.5 G3",
> ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED),
> > + SND_PCI_QUIRK(0x103c, 0x8a06, "HP Dragonfly Folio 13.5 G3",
> ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED),
>
> Those additions are simply superfluous, no? Also...
>
> > diff --git a/sound/hda/common/auto_parser.c b/sound/hda/common/
> auto_parser.c
> > index 8923813..e876378 100644
> > --- a/sound/hda/common/auto_parser.c
> > +++ b/sound/hda/common/auto_parser.c
> > @@ -1048,6 +1048,16 @@ void snd_hda_pick_fixup(struct hda_codec *codec,
> > if (codec->bus->pci) {
> > pci_vendor = codec->bus->pci->subsystem_vendor;
> > pci_device = codec->bus->pci->subsystem_device;
> > + /* Fallback: use codec SSID if PCI SSID is zero (e.g. HP Dragonfly
> Folio G3 with SOF) */
> > + if (!pci_vendor && !pci_device) {
> > + pci_vendor = codec->core.subsystem_id >> 16;
> > + pci_device = codec->core.subsystem_id & 0xffff;
> > + }
> > + /* Fallback: use codec SSID if PCI SSID is zero (e.g. HP Dragonfly
> Folio G3 with SOF) */
> > + if (!pci_vendor && !pci_device) {
> > + pci_vendor = codec->core.subsystem_id >> 16;
> > + pci_device = codec->core.subsystem_id & 0xffff;
> > + }
>
> ... here checking twice? The patch looks somehow odd-merged.
>
> And, I think we can just skip the PCI matching when either vendor or
> device is 0. So, something like below instead.
>
> Could you verify whether it works?
>
> Takashi
>
> diff --git a/sound/hda/common/auto_parser.c b/sound/hda/common/
> auto_parser.c
> index 8923813ce424..5bc95d3116ff 100644
> --- a/sound/hda/common/auto_parser.c
> +++ b/sound/hda/common/auto_parser.c
> @@ -1013,7 +1013,7 @@ void snd_hda_pick_fixup(struct hda_codec *codec,
> const char *name = NULL;
> const char *type = NULL;
> unsigned int vendor, device;
> - u16 pci_vendor, pci_device;
> + u16 pci_vendor = 0, pci_device = 0;
> u16 codec_vendor, codec_device;
>
> if (codec->fixup_id != HDA_FIXUP_ID_NOT_SET)
> @@ -1066,7 +1066,7 @@ void snd_hda_pick_fixup(struct hda_codec *codec,
> /* match primarily with the PCI SSID */
> for (q = quirk; q->subvendor || q->subdevice; q++) {
> /* if the entry is specific to codec SSID, check with it */
> - if (!codec->bus->pci || q->match_codec_ssid) {
> + if (!pci_vendor || !pci_device || q->match_codec_ssid) {
> if (hda_quirk_match(codec_vendor, codec_device, q)) {
> type = "codec SSID";
> goto found_device;
>
next prev parent reply other threads:[~2026-05-15 10:48 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-14 13:31 [PATCH] ALSA: hda: Fix SSID detection for HP Dragonfly Folio G3 Heiko Schmid
2026-05-15 9:03 ` Takashi Iwai
[not found] ` <04D6DA87-AFD0-44CA-800E-0BA15BEAEA61@getmailspring.com>
2026-05-15 10:48 ` Takashi Iwai [this message]
2026-05-15 11:08 ` Stefan Binding (Opensource)
2026-05-15 11:12 ` Takashi Iwai
-- strict thread matches above, loose matches on Subject: below --
2026-04-29 9:53 Heiko Schmid
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=874ik9t0cj.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=heiko@future-machines.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox