From: Takashi Iwai <tiwai@suse.de>
To: Sinan Turunc <enscrpt@pm.me>
Cc: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ALSA: usx2y: Count completions apart from the URB array length
Date: Mon, 16 Nov 2026 16:40:43 +0100 [thread overview]
Message-ID: <875wxwyebo.wl-tiwai@suse.de> (raw)
In-Reply-To: <20261115121602.151-1-enscrpt@pm.me>
On Sun, 15 Nov 2026 13:16:33 +0100,
Sinan Turunc wrote:
>
> usx2y_rate_set() allocates a snd_usx2y_urb_seq with len set to the
> number of URBs, and i_usx2y_04int() decrements len once per completed
> URB to know when all of them are done. Since len is also the
> __counted_by() bound of the urb[] array, every access to the array after
> the first completion is out of range for UBSAN, and the cleanup loop in
> usx2y_rate_set() trips it on every prepare:
>
> UBSAN: array-index-out-of-bounds in sound/usb/usx2y/usbusx2yaudio.c:694:18
> index 0 is out of range for type 'urb *[*]'
>
> Count the completions in a separate field and leave len as the array
> length.
>
> Tested on 7.3-rc7 with CONFIG_UBSAN_BOUNDS and an emulated US-122 over
> USB/IP: before, the report appears on every prepare; after, a 30 s
> capture stream prepares and runs without it and the rate sequence still
> completes.
>
> Fixes: f5cc9cdfc96f ("ALSA: usx2y: Annotate struct snd_usx2y_urb_seq with __counted_by")
> Signed-off-by: Sinan Turunc <enscrpt@pm.me>
Applied now. Thanks.
Takashi
prev parent reply other threads:[~2026-11-16 15:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-15 12:16 [PATCH] ALSA: usx2y: Count completions apart from the URB array length Sinan Turunc
2026-11-16 15:40 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=875wxwyebo.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=enscrpt@pm.me \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox