[PATCH] ALSA: usb-audio: don't log messages meant for 1810c when initializing 1824c

[Roy Vegard Ovesen <roy.vegard.ovesen@gmail.com>]

The log messages for the PreSonus STUDIO 1810c about
device_setup are not applicable to the 1824c, and should
not be logged when 1824c initializes.

Refactor from if statement to switch statement as there
might be more STUDIO series devices added later.

Fixes: 080564558eb1 ("ALSA: usb-audio: enable support for Presonus Studio 1824c within 1810c file")
Signed-off-by: Roy Vegard Ovesen <roy.vegard.ovesen@gmail.com>
---
 sound/usb/mixer_s1810c.c | 33 ++++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/sound/usb/mixer_s1810c.c b/sound/usb/mixer_s1810c.c
index 89c652434f71..6e09e074c0e7 100644
--- a/sound/usb/mixer_s1810c.c
+++ b/sound/usb/mixer_s1810c.c
@@ -597,15 +597,6 @@ int snd_sc1810_init_mixer(struct usb_mixer_interface *mixer)
 	if (!list_empty(&chip->mixer_list))
 		return 0;
 
-	dev_info(&dev->dev,
-		 "Presonus Studio 1810c, device_setup: %u\n", chip->setup);
-	if (chip->setup == 1)
-		dev_info(&dev->dev, "(8out/18in @ 48kHz)\n");
-	else if (chip->setup == 2)
-		dev_info(&dev->dev, "(6out/8in @ 192kHz)\n");
-	else
-		dev_info(&dev->dev, "(8out/14in @ 96kHz)\n");
-
 	ret = snd_s1810c_init_mixer_maps(chip);
 	if (ret < 0)
 		return ret;
@@ -634,16 +625,28 @@ int snd_sc1810_init_mixer(struct usb_mixer_interface *mixer)
 	if (ret < 0)
 		return ret;
 
-	// The 1824c has a Mono Main switch instead of a
-	// A/B select switch.
-	if (mixer->chip->usb_id == USB_ID(0x194f, 0x010d)) {
-		ret = snd_s1810c_switch_init(mixer, &snd_s1824c_mono_sw);
+	switch (chip->usb_id) {
+	case USB_ID(0x194f, 0x010c): /* Presonus Studio 1810c */
+		dev_info(&dev->dev,
+			 "Presonus Studio 1810c, device_setup: %u\n", chip->setup);
+		if (chip->setup == 1)
+			dev_info(&dev->dev, "(8out/18in @ 48kHz)\n");
+		else if (chip->setup == 2)
+			dev_info(&dev->dev, "(6out/8in @ 192kHz)\n");
+		else
+			dev_info(&dev->dev, "(8out/14in @ 96kHz)\n");
+
+		ret = snd_s1810c_switch_init(mixer, &snd_s1810c_ab_sw);
 		if (ret < 0)
 			return ret;
-	} else if (mixer->chip->usb_id == USB_ID(0x194f, 0x010c)) {
-		ret = snd_s1810c_switch_init(mixer, &snd_s1810c_ab_sw);
+
+		break;
+	case USB_ID(0x194f, 0x010d): /* Presonus Studio 1824c */
+		ret = snd_s1810c_switch_init(mixer, &snd_s1824c_mono_sw);
 		if (ret < 0)
 			return ret;
+
+		break;
 	}
 
 	return ret;
-- 
2.51.1.dirty