Re: [PATCH v4 6/6] riscv: dts: sophgo: dts nodes for i2s tdm modules

[Inochi Amaoto <inochiama@gmail.com>]

On Tue, Jan 20, 2026 at 11:06:08PM +0400, Anton D. Stavinskii wrote:
> Introduced I2S nodes and internal dac and adc nodes as well
> The new header file provided in order to make DMA channel names
> more readable.
> 
> Signed-off-by: Anton D. Stavinskii <stavinsky@gmail.com>
> ---
>  arch/riscv/boot/dts/sophgo/cv180x-dmamux.h | 57 ++++++++++++++++++++++++++++++
>  arch/riscv/boot/dts/sophgo/cv180x.dtsi     | 55 ++++++++++++++++++++++++++++
>  2 files changed, 112 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/sophgo/cv180x-dmamux.h b/arch/riscv/boot/dts/sophgo/cv180x-dmamux.h
> new file mode 100644
> index 000000000000..6314bf6e9dc8
> --- /dev/null
> +++ b/arch/riscv/boot/dts/sophgo/cv180x-dmamux.h
> @@ -0,0 +1,57 @@
> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
> +/*
> + * Copyright (C) 2025 Inochi Amaoto <inochiama@gmail.com>
> + */
> +
> +#ifndef _SOPHGO_CV18XX_DMAMUX
> +#define _SOPHGO_CV18XX_DMAMUX
> +
> +#define DMA_I2S0_RX		0
> +#define DMA_I2S0_TX		1
> +#define DMA_I2S1_RX		2
> +#define DMA_I2S1_TX		3
> +#define DMA_I2S2_RX		4
> +#define DMA_I2S2_TX		5
> +#define DMA_I2S3_RX		6
> +#define DMA_I2S3_TX		7
> +#define DMA_UART0_RX	8
> +#define DMA_UART0_TX	9
> +#define DMA_UART1_RX	10
> +#define DMA_UART1_TX	11
> +#define DMA_UART2_RX	12
> +#define DMA_UART2_TX	13
> +#define DMA_UART3_RX	14
> +#define DMA_UART3_TX	15
> +#define DMA_SPI0_RX		16
> +#define DMA_SPI0_TX		17
> +#define DMA_SPI1_RX		18
> +#define DMA_SPI1_TX		19
> +#define DMA_SPI2_RX		20
> +#define DMA_SPI2_TX		21
> +#define DMA_SPI3_RX		22
> +#define DMA_SPI3_TX		23
> +#define DMA_I2C0_RX		24
> +#define DMA_I2C0_TX		25
> +#define DMA_I2C1_RX		26
> +#define DMA_I2C1_TX		27
> +#define DMA_I2C2_RX		28
> +#define DMA_I2C2_TX		29
> +#define DMA_I2C3_RX		30
> +#define DMA_I2C3_TX		31
> +#define DMA_I2C4_RX		32
> +#define DMA_I2C4_TX		33
> +#define DMA_TDM0_RX		34
> +#define DMA_TDM0_TX		35
> +#define DMA_TDM1_RX		36
> +#define DMA_AUDSRC		37
> +#define DMA_SPI_NAND	38
> +#define DMA_SPI_NOR		39
> +#define DMA_UART4_RX	40
> +#define DMA_UART4_TX	41
> +#define DMA_SPI_NOR1	42
> +
> +#define DMA_CPU_A53		0
> +#define DMA_CPU_C906_0	1
> +#define DMA_CPU_C906_1	2
> +
> +#endif // _SOPHGO_CV18XX_DMAMUX
> diff --git a/arch/riscv/boot/dts/sophgo/cv180x.dtsi b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
> index 06b0ce5a2db7..ebe5e8113939 100644
> --- a/arch/riscv/boot/dts/sophgo/cv180x.dtsi
> +++ b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
> @@ -8,6 +8,7 @@
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include "cv18xx-reset.h"
> +#include "cv180x-dmamux.h"
>  
>  / {
>  	#address-cells = <1>;
> @@ -448,6 +449,60 @@ usb: usb@4340000 {
>  			status = "disabled";
>  		};
>  
> +		i2s0: i2s@4100000 {
> +			compatible = "sophgo,cv1800b-i2s";
> +			reg = <0x04100000 0x1000>;
> +			clocks = <&clk CLK_APB_I2S0>, <&clk CLK_SDMA_AUD0>;
> +			clock-names = "i2s", "mclk";
> +			dmas = <&dmamux DMA_I2S0_RX 1>, <&dmamux DMA_I2S0_TX 1>;
> +			dma-names = "rx", "tx";
> +			status = "disabled";
> +		};
> +
> +		i2s1: i2s@4110000 {
> +			compatible = "sophgo,cv1800b-i2s";
> +			reg = <0x04110000 0x1000>;
> +			clocks = <&clk CLK_APB_I2S1>, <&clk CLK_SDMA_AUD1>;
> +			clock-names = "i2s", "mclk";
> +			dmas = <&dmamux DMA_I2S1_RX 1>, <&dmamux DMA_I2S1_TX 1>;
> +			dma-names = "rx", "tx";
> +			status = "disabled";
> +		};
> +
> +		i2s2: i2s@4120000 {
> +			compatible = "sophgo,cv1800b-i2s";
> +			reg = <0x04120000 0x1000>;
> +			clocks = <&clk CLK_APB_I2S2>, <&clk CLK_SDMA_AUD2>;
> +			clock-names = "i2s", "mclk";
> +			dmas = <&dmamux DMA_I2S2_RX 1>, <&dmamux DMA_I2S2_TX 1>;
> +			dma-names = "rx", "tx";
> +			status = "disabled";
> +		};
> +
> +		i2s3: i2s@4130000 {
> +			compatible = "sophgo,cv1800b-i2s";
> +			reg = <0x04130000 0x1000>;
> +			clocks = <&clk CLK_APB_I2S3>, <&clk CLK_SDMA_AUD3>;
> +			clock-names = "i2s", "mclk";
> +			dmas = <&dmamux DMA_I2S3_RX 1>, <&dmamux DMA_I2S3_TX 1>;
> +			dma-names = "rx", "tx";
> +			status = "disabled";
> +		};
> +

> +		int_adc: codec@300a100 {
> +			compatible = "sophgo,cv1800b-sound-adc";
> +			#sound-dai-cells = <0>;
> +			reg = <0x300a100 0x100>;
> +			status = "disabled";
> +		};
> +
> +		int_dac: codec@300a000 {
> +			compatible = "sophgo,cv1800b-sound-dac";
> +			#sound-dai-cells = <0>;
> +			reg = <0x300a000 0x100>;
> +			status = "disabled";
> +		};
> +

Hi, Anton,

Can you send a new version with the all device nodes sorted by address?
So I can take them, Thanks.

Regards,
Inochi

>  		rtc@5025000 {
>  			compatible = "sophgo,cv1800b-rtc", "syscon";
>  			reg = <0x5025000 0x2000>;
> 
> -- 
> 2.43.0
>