[PATCH 00/14] ALSA: scarlett2: Add support for Vocaster

["Geoffrey D. Bennett" <g@b4.vu>]

Hi Takashi,

This patch series contains:

1-2: Fix to wait for an ACK from the device after sending a command,
before attempting to read the response. This didn't seem to be
necessary previously, but with 4th Gen devices it seems to help with a
rare issue where the device stops responding.

3: Support for reading flash segments from the device.

4-11: Preparation for Vocaster support.

12: Vocaster One and Two support.

13: Add autogain target controls for 4th Gen and Vocaster.

14: Add Bluetooth volume control for Vocaster Two.

Thanks,
Geoffrey.

Geoffrey D. Bennett (14):
  ALSA: scarlett2: Move initialisation code lower in the source
  ALSA: scarlett2: Implement handling of the ACK notification
  ALSA: scarlett2: Add support for reading from flash
  ALSA: scarlett2: Rename gen4_write_addr to param_buf_addr
  ALSA: scarlett2: Add pbuf field to struct scarlett2_config
  ALSA: scarlett2: Add support for config items with size = 32
  ALSA: scarlett2: Add additional input configuration parameters
  ALSA: scarlett2: Define the maximum preamp input gain per-config-set
  ALSA: scarlett2: Define autogain status texts per-config-set
  ALSA: scarlett2: Add input mute controls
  ALSA: scarlett2: Add DSP controls
  ALSA: scarlett2: Add support for Focusrite Vocaster One and Two
  ALSA: scarlett2: Add autogain target controls
  ALSA: scarlett2: Add Bluetooth volume control for Vocaster Two

 sound/usb/mixer_quirks.c    |    2 +
 sound/usb/mixer_scarlett2.c | 2757 ++++++++++++++++++++++++++++-------
 2 files changed, 2235 insertions(+), 524 deletions(-)

-- 
2.43.0