From: Qianghua Wang <qianghua.wang@senarytech.com>
To: linux-sound@vger.kernel.org
Cc: Qianghua Wang <qianghua.wang@senarytech.com>,
Mark Brown <broonie@kernel.org>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>,
Bard Liao <yung-chuan.liao@linux.intel.com>,
Liam Girdwood <liam.r.girdwood@linux.intel.com>,
Peter Ujfalusi <peter.ujfalusi@linux.intel.com>,
Kai Vehmanen <kai.vehmanen@linux.intel.com>,
Cezary Rojewski <cezary.rojewski@intel.com>,
Charles Keepax <ckeepax@opensource.cirrus.com>,
bo liu <bo.liu@senarytech.com>
Subject: [PATCH v4 0/3] ASoC: add Senary SN624x SoundWire SDCA support
Date: Tue, 18 Aug 2026 10:08:43 +0800 [thread overview]
Message-ID: <cover.1787017592.git.qianghua.wang@senarytech.com> (raw)
This series adds SoundWire SDCA support for Senary SN624x
multi-function codecs (jack, speaker amp, DMIC) on Intel ARL,
LNL, MTL, and PTL.
v3 was dropped due to a CI build break against current SDCA
helpers, so this is a full resend with those fixes folded in
(not an incremental on top of v3).
Changes since v3:
- Enable runtime PM from io_init() on first ATTACHED, matching
the rt722 pattern, instead of enabling it from probe after
register_component().
- Update sdca_asoc_pde_poll_actual_ps() / sdca_parse_function()
call sites to the current prototypes (drop unused device and
SoundWire slave arguments) so the driver builds on for-next.
Changes since v2:
- Propagate io_init Function Status / defaults failures instead of
skipping init and still returning success.
- Zero-initialize sdw stream/port configs and use
snd_sdw_params_to_config().
- Program jack SampleFreqIndex only for the configured stream
direction (avoid forcing symmetric rates).
- Mark regmap cache dirty on suspend and on re-io_init after
re-attach so regcache_sync restores state after power loss/reset.
- Hold a long-lived runtime PM get while jack detect is enabled
via set_jack / remove (drop poll mark_last_busy refresh).
- Use sdw_slave_wait_for_init() on resume when unattach_request
is set.
Patch summary:
1/3 codec driver + MAINTAINERS
2/3 sdw_utils helpers and codec_info
3/3 Intel ARL/LNL/MTL/PTL ACPI match + SOF mach select
Validated on LG Wildcat Lake / PTL with part_id 0x6247
(MODALIAS sdw:m0496p6247v03c01).
Qianghua Wang (3):
ASoC: codecs: add SN624x SDCA SoundWire driver
ASoC: sdw_utils: add Senary SN624x helpers and codec_info
ASoC: Intel: soc-acpi: add SN624x entries for ARL/LNL/MTL/PTL
MAINTAINERS | 3 +
include/sound/soc_sdw_utils.h | 20 +
sound/soc/codecs/Kconfig | 13 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/sn624x-sdca-sdw.c | 1888 +++++++++++++++++
sound/soc/codecs/sn624x-sdca.h | 152 ++
sound/soc/intel/boards/Kconfig | 1 +
.../intel/common/soc-acpi-intel-arl-match.c | 71 +
.../intel/common/soc-acpi-intel-lnl-match.c | 71 +
.../intel/common/soc-acpi-intel-mtl-match.c | 71 +
.../intel/common/soc-acpi-intel-ptl-match.c | 82 +
sound/soc/sdw_utils/Makefile | 4 +-
sound/soc/sdw_utils/soc_sdw_senary_amp.c | 80 +
sound/soc/sdw_utils/soc_sdw_senary_dmic.c | 49 +
sound/soc/sdw_utils/soc_sdw_senary_sdca.c | 63 +
.../soc_sdw_senary_sdca_jack_common.c | 197 ++
sound/soc/sdw_utils/soc_sdw_utils.c | 166 ++
17 files changed, 2932 insertions(+), 1 deletion(-)
create mode 100644 sound/soc/codecs/sn624x-sdca-sdw.c
create mode 100644 sound/soc/codecs/sn624x-sdca.h
create mode 100644 sound/soc/sdw_utils/soc_sdw_senary_amp.c
create mode 100644 sound/soc/sdw_utils/soc_sdw_senary_dmic.c
create mode 100644 sound/soc/sdw_utils/soc_sdw_senary_sdca.c
create mode 100644 sound/soc/sdw_utils/soc_sdw_senary_sdca_jack_common.c
--
2.47.3
next reply other threads:[~2026-08-18 2:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-18 2:08 Qianghua Wang [this message]
2026-08-18 2:08 ` [PATCH v4 1/3] ASoC: codecs: add SN624x SDCA SoundWire driver Qianghua Wang
2026-08-18 2:08 ` [PATCH v4 2/3] ASoC: sdw_utils: add Senary SN624x helpers and codec_info Qianghua Wang
2026-08-18 2:08 ` [PATCH v4 3/3] ASoC: Intel: soc-acpi: add SN624x entries for ARL/LNL/MTL/PTL Qianghua Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1787017592.git.qianghua.wang@senarytech.com \
--to=qianghua.wang@senarytech.com \
--cc=bo.liu@senarytech.com \
--cc=broonie@kernel.org \
--cc=cezary.rojewski@intel.com \
--cc=ckeepax@opensource.cirrus.com \
--cc=kai.vehmanen@linux.intel.com \
--cc=liam.r.girdwood@linux.intel.com \
--cc=linux-sound@vger.kernel.org \
--cc=peter.ujfalusi@linux.intel.com \
--cc=pierre-louis.bossart@linux.dev \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox