From: Kailang <kailang@realtek.com>
To: Takashi Iwai <tiwai@suse.de>, Zeyu Li <13776528859@163.com>
Cc: "linux-sound@vger.kernel.org" <linux-sound@vger.kernel.org>,
Takashi Iwai <tiwai@suse.com>, Jaroslav Kysela <perex@perex.cz>
Subject: RE: [PATCH] ALSA: hda/realtek: Add ALC235 support for headset mode
Date: Thu, 1 Oct 2026 06:18:41 +0000 [thread overview]
Message-ID: <f67a320a35814d6eab280dc65d04e039@realtek.com> (raw)
In-Reply-To: <8733ut5ylq.wl-tiwai@suse.de>
-----Original Message-----
From: Takashi Iwai <tiwai@suse.de>
Sent: Monday, September 28, 2026 8:50 PM
To: Zeyu Li <13776528859@163.com>
Cc: linux-sound@vger.kernel.org; Takashi Iwai <tiwai@suse.com>; Jaroslav Kysela <perex@perex.cz>; Kailang <kailang@realtek.com>
Subject: Re: [PATCH] ALSA: hda/realtek: Add ALC235 support for headset mode
External mail : This email originated from outside the organization. Do not reply, click links, or open attachments unless you recognize the sender and know the content is safe.
On Sat, 26 Sep 2026 15:58:00 +0200,
Zeyu Li wrote:
>
> The ALC235 (0x10ec0235) is registered as the ALC255 codec variant in
> patch_alc269(), but the headset mode functions were missing a case for
> it, so the CTIA/OMTP jack type detection and routing never ran on this
> codec. As a result, a plugged-in headset is detected (jack presence
> works) but the microphone signal is never routed, leaving the capture
> stream permanently silent.
>
> Verified on an ASUS M5451GA laptop (HDA:10ec0235,10431814): with the
> ALC255 coef sequence applied, the headset microphone works correctly.
>
> Signed-off-by: Zeyu Li <13776528859@163.com>
> ---
> sound/hda/codecs/realtek/realtek.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/sound/hda/codecs/realtek/realtek.c
> b/sound/hda/codecs/realtek/realtek.c
> index db365a746..bc5226fad 100644
> --- a/sound/hda/codecs/realtek/realtek.c
> +++ b/sound/hda/codecs/realtek/realtek.c
> @@ -1292,6 +1292,7 @@ static void alc_headset_mode_unplugged(struct hda_codec *codec)
> }
>
> switch (codec->core.vendor_id) {
> + case 0x10ec0235:
> case 0x10ec0255:
> alc_process_coef_fw(codec, coef0255);
> break;
> @@ -1407,6 +1408,7 @@ static void alc_headset_mode_mic_in(struct hda_codec *codec, hda_nid_t hp_pin,
> };
>
> switch (codec->core.vendor_id) {
> + case 0x10ec0235:
> case 0x10ec0255:
> alc_write_coef_idx(codec, 0x45, 0xc489);
> snd_hda_set_pin_ctl_cache(codec, hp_pin, 0); @@ -1562,6
> +1564,7 @@ static void alc_headset_mode_default(struct hda_codec *codec)
> alc_process_coef_fw(codec, coef0225);
> alc_hp_enable_unmute(codec, 75);
> break;
> + case 0x10ec0235:
> case 0x10ec0255:
> alc_process_coef_fw(codec, coef0255);
> break;
> @@ -1663,6 +1666,7 @@ static void alc_headset_mode_ctia(struct hda_codec *codec)
> };
>
> switch (codec->core.vendor_id) {
> + case 0x10ec0235:
> case 0x10ec0255:
> alc_process_coef_fw(codec, coef0255);
> break;
> @@ -1780,6 +1784,7 @@ static void alc_headset_mode_omtp(struct hda_codec *codec)
> };
>
> switch (codec->core.vendor_id) {
> + case 0x10ec0235:
> case 0x10ec0255:
> alc_process_coef_fw(codec, coef0255);
> break;
> @@ -1881,6 +1886,7 @@ static void alc_determine_headset_type(struct hda_codec *codec)
> }
>
> switch (codec->core.vendor_id) {
> + case 0x10ec0235:
> case 0x10ec0255:
> alc_process_coef_fw(codec, coef0255);
> msleep(300);
>I'm not sure whether it's 100% safe to apply this, and I'd like to hear from Realtek.
>Kailang, could you check it? Can ALC235 be fully compatible in this manner?
Yes, it's compatible.
>thanks,
>Takashi
prev parent reply other threads:[~2026-10-01 6:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-26 14:03 [PATCH] ALSA: hda/realtek: Add ALC235 support for headset mode Zeyu Li
[not found] ` <20260926135800.27347-1-13776528859@163.com>
2026-09-28 12:50 ` Takashi Iwai
2026-09-28 14:12 ` Zeyu Li
2026-10-01 7:15 ` Takashi Iwai
2026-10-01 6:18 ` Kailang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f67a320a35814d6eab280dc65d04e039@realtek.com \
--to=kailang@realtek.com \
--cc=13776528859@163.com \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox