From: Richard V Robinson <robinson@goAmcan.com>
To: linux-sound@vger.kernel.org
Subject: Re: Driver for Philips Acoustic Edge (PSC 706)
Date: Sun, 03 Feb 2002 20:22:49 +0000 [thread overview]
Message-ID: <marc-linux-sound-101276765620830@msgid-missing> (raw)
In-Reply-To: <marc-linux-sound-101207524703621@msgid-missing>
Thanks for your response Zwane. I did as comprehensive a lspci as I
could do and got the following results. If you can direct me to a
working driver commercial or otherwise I'd be much obliged.
-richard r
# lspci -vv -xxx -s 02:0b
02:0b.0 Multimedia audio controller: VLSI Technology Inc: Unknown device
0307 (rev 06)
Subsystem: VLSI Technology Inc: Unknown device 8051
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2250ns min, 10000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d000 [disabled] [size\x128]
Region 1: I/O ports at b800 [disabled] [size\x16]
Region 2: I/O ports at b400 [disabled] [size=4]
Region 3: I/O ports at b000 [disabled] [size=8]
Region 4: I/O ports at a800 [disabled] [sized]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 04 10 07 03 04 00 90 02 06 00 01 04 00 20 80 00
10: 01 d0 00 00 01 b8 00 00 01 b4 00 00 01 b0 00 00
20: 01 a8 00 00 00 00 00 00 00 00 00 00 04 10 51 80
30: 00 00 00 00 d0 00 00 00 00 00 00 00 ff 01 09 28
40: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 02 00 00 03 00 00 00
60: 04 00 00 00 00 00 00 00 40 20 00 00 00 00 00 00
70: 02 00 00 00 00 00 00 00 15 00 00 00 d3 00 00 00
80: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 00 22 06 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: f4 f4 f4 f4 53 53 53 53 00 00 00 00 00 00 00 00
02:0b.1 Input device controller: VLSI Technology Inc: Unknown device 0308
Subsystem: VLSI Technology Inc: Unknown device 0308
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: I/O ports at a400 [disabled] [size=8]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 04 10 08 03 00 00 90 02 00 00 80 09 00 00 00 00
10: 01 a4 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 04 10 08 03
30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 00 22 02 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================
Zwane Mwaikambo wrote:
>On Sat, 26 Jan 2002, Richard V Robinson wrote:
>
>>Hi. Can anyone tell me if there exists a linux driver for the Philips
>>Acoustic Edge (PSC 706) sound card? Or if someone is working on one?
>>
>
>Could you please supply a lspci of the sound card.
>
>>If not, I'm a fairly resourceful and clever programmer. And I have the
>>card in question. How does one get started creating drivers for
>>hardware like this?
>>
>
>You can start of by finding out the chip on the sound card and getting the
>datasheets for it. If the chip supports or is supported by some current
>drivers, you could make the appropriate additions to the supported cards
>in the particular modules (add Vendor/PCI IDs) and see if it works.
>Otherwise you could start work on a new driver :) It might be an idea to
>read through a couple of drivers and see how they do things. For
>additional help regarding kernel hacking in general, check out
>www.kernelnewbies.org and the mailling list is at
>kernelnewbies@nl.linux.org
>
>Good luck, and happy hacking :)
>
>Regards,
> Zwane Mwaikambo
>
>
prev parent reply other threads:[~2002-02-03 20:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-01-26 20:02 Driver for Philips Acoustic Edge (PSC 706) Richard V Robinson
2002-01-27 6:36 ` Zwane Mwaikambo
2002-02-03 20:22 ` Richard V Robinson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-linux-sound-101276765620830@msgid-missing \
--to=robinson@goamcan.com \
--cc=linux-sound@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox