From: Samuel Thibault <Samuel.Thibault@ens-lyon.fr>
To: linux-sound@vger.kernel.org
Subject: [PATCH] 2.4.18 drivers/sound/maestro.c
Date: Sun, 30 Jun 2002 20:33:43 +0000 [thread overview]
Message-ID: <marc-linux-sound-102546924217499@msgid-missing> (raw)
Hi !
maestro.c:3537 takes care about volume button pressing when requesting irq
(maestro_probe) :
if((ret=request_irq(card->irq, ess_interrupt, SA_SHIRQ, card_names[card_type], card)))
{
<snipped>
}
/* Turn on hardware volume control interrupt.
This has to come after we grab the IRQ above,
or a crash will result on installation if a button has been pressed,
because in that case we'll get an immediate interrupt. */
n = inw(iobase+0x18);
n|=(1<<6);
outw(n, iobase+0x18);
but not when unloading module : in fact, this bit is never cleared.
Indeed, loading the module, unloading it, and pressing a volume button
immediately crashes.
This cures the problem :
diff -urN linux-2.4.18/drivers/sound/maestro.c linux-2.4.18-cor/drivers/sound/maestro.c
--- linux-2.4.18/drivers/sound/maestro.c Sun Jun 30 22:00:22 2002
+++ linux-2.4.18-cor/drivers/sound/maestro.c Sun Jun 30 22:02:11 2002
@@ -3569,9 +3569,18 @@
static void maestro_remove(struct pci_dev *pcidev) {
struct ess_card *card = pci_get_drvdata(pcidev);
int i;
+ u32 n;
/* XXX maybe should force stop bob, but should be all
stopped by _release by now */
+
+ /* Turn off hardware volume control interrupt.
+ This has to come before we leave the IRQ below,
+ or a crash results if a button is pressed ! */
+ n = inw(card->iobase+0x18);
+ n&=~(1<<6);
+ outw(n, card->iobase+0x18);
+
free_irq(card->irq, card);
unregister_sound_mixer(card->dev_mixer);
for(i=0;i<NR_DSPS;i++)
This patch also apply to 2.5 series (tested on 2.5.24) in linux/sound/oss
by using -p3.
Best regards,
Samuel Thibault
reply other threads:[~2002-06-30 20:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-linux-sound-102546924217499@msgid-missing \
--to=samuel.thibault@ens-lyon.fr \
--cc=linux-sound@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox