From mboxrd@z Thu Jan  1 00:00:00 1970
From: DFalt <jiann@vcu.edu>
Date: Thu, 10 Sep 1998 02:01:14 +0000
Subject: Re: Yamaha opl3
Message-Id: <marc-linux-sound-90540059504086@msgid-missing>
List-Id: <linux-sound.vger.kernel.org>
References: <marc-linux-sound-90522162401464@msgid-missing>
In-Reply-To: <marc-linux-sound-90522162401464@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: linux-sound@vger.kernel.org

i have the yamaha opl3sax on a gw2k 9100 xl laptop and my card works whenever i
warm boot from win/dos into linux...this can be accomplished via lilo or loadlin
but with this procedure the i/o 'defaults' are kept the same...and oss or any of
that other shit to let u do what u should be able to do is not necessary   cause
linux wants to send the irq number to a different number(my os's r gaywin95/gaynt
4/ and linux)

zewei chen wrote:

> I'm not sure this helps, but I had the same problem a while ago.
> Not quite resolved, yet.  Here's my experience (in the hopes of
> helping Catalin gather some data, and soliciting some insight
> for my own situation) -
>
> pnpdump detected nothing.  may I assume the card is not plug-n-play?
>
> I created a file /etc/conf.modules, following some instructions
> from one of the FAQ/HOW-TOs, with these lines (parameters
> copied from Win95 - yes the card works there):
>
> alias sound sb
> options -k sb io=0x220 irq=5 dma=0,5
> alias midi opl3
> options -k opl3 io=0x388
>
> loaded the sound module by hand, now lsmod shows:
>
> # lsmod
> Module         Pages    Used by
> 3c589_cs           2            1
> ds                 2    [3c589_cs]      3
> i82365             4            2
> pcmcia_core        8    [3c589_cs ds i82365]    4
> opl3               3            0
> sb                 6            0
> uart401            2    [sb]    0
> sound             16    [opl3 sb uart401]       0
>
> I was able to play some mpeg sound files, though the sound
> was terrible.  When I tried to play some sound files in another
> format using our own software, I get "can't open wave dev, -1"
> as an error message.  doing an strace on it shows:
>
> open("/dev/dsp", O_WRONLY)              = 3
> ioctl(3, SOUND_PCM_WRITE_CHANNELS, 0xbfffd3e0) = 0
> ioctl(3, SNDCTL_DSP_SETFMT, 0xbfffd3dc) = 0
> write(2, "cant open wave dev, err -1\n", 27cant open wave dev, err -1
> ) = 27
>
> Well, it seems that one of the ioctl syscall did not get the right value back.
> perhaps I'm missing some sound drivers?
>
> Would appreciate some insight.
>
> Zewei
>
> Catalin Marinescu wrote:
>
> >     Hi all !
> >     I have a sound card Yamaha opl3 and I can't make it work on my linux
> > system.
> >     If anyone knows how can I fix this please help me.
> > Thanks.