From: John Christer Wickman <christer.wickman@swipnet.se>
To: linux-sound@vger.kernel.org
Subject: TB Tropez Rev. 2
Date: Sat, 24 Oct 1998 17:54:45 +0000 [thread overview]
Message-ID: <marc-linux-sound-90925121013266@msgid-missing> (raw)
[-- Attachment #1: Type: text/plain, Size: 673 bytes --]
How can I get my Turtle Beach Tropez Rev. 2, soundcard to work under
RH5.0 ( kernel 2.0.31). I have tried to configure the card as a MAD16
card, SB clones and MSS. But not a sound through /dev/audio.
I had an old version of Linux, I think it was kernel 1.2.x, 1.3.x or
something then the card worked. Perhaps it may not help you (especially
when I can't remember exactly what kernel I used), but might there have
been some changes in the driver that reject my soundcard.
Onboard chips:
codec: CS4231A (Crystal Semiconductor)
audio interface chip: 82C929 (OPTi)
MPU-401
OPL3
ICS WaveFront synthesizer
Thanks in advance,
Christer Wickman
[-- Attachment #2: Card for John Christer Wickman --]
[-- Type: text/x-vcard, Size: 171 bytes --]
begin:vcard
n:Wickman;Christer
x-mozilla-html:FALSE
adr:;;;;;;
version:2.1
email;internet:christer.wickman@swipnet.se
x-mozilla-cpt:;-21824
fn:Christer Wickman
end:vcard
reply other threads:[~1998-10-24 17:54 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-linux-sound-90925121013266@msgid-missing \
--to=christer.wickman@swipnet.se \
--cc=linux-sound@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox