From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andy Jefferson Date: Sat, 14 Nov 1998 15:03:30 +0000 Subject: 2.1.128 : AWE64 problems Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sound@vger.kernel.org Hi, have been using a patched 2.0.35 with all features of an AWE64 with no problems. I've just installed 2.1.128 and attempted to get it all going there also. ---------------------------------------------------------------- Basically with 2.0.35 (sound as a module), 'cat /dev/sndstat' gives Sound Driver:3.5.4-960630 (Fri Oct 30 21:33:28 GMT 1998 root, Linux beast 2.0.33 #8 Sun Jun 21 10:16:30 BST 1998 i686 unknown) Kernel: Linux beast 2.0.35 #6 Sun Nov 1 12:53:55 GMT 1998 i686 Config options: 0 Installed drivers: Type 1: OPL-2/OPL-3 FM Type 2: Sound Blaster Type 7: SB MPU-401 Card config: Sound Blaster at 0x220 irq 5 drq 1,5 SB MPU-401 at 0x330 irq 5 drq 0 OPL-2/OPL-3 FM at 0x388 drq 0 Audio devices: 0: Sound Blaster 16 (4.16) Synth devices: 0: Yamaha OPL-3 1: AWE32-0.4.2d (RAM512k) Midi devices: 0: Sound Blaster 16 Timers: 0: System clock Mixers: 0: Sound Blaster 1: AWE32 Equalizer ----------------------------------------------------------- whereas with 2.1.128 (sound as a module), I get OSS/Free:3.8s2++-971130 Load type: Driver loaded as a module Kernel: Linux beast 2.1.128 #3 SMP Sat Nov 14 11:29:17 GMT 1998 i686 Config options: 0 Installed drivers: Card config: Audio devices: 0: Sound Blaster 16 (4.16) (DUPLEX) Synth devices: 0: Yamaha OPL3 1: AWE32-0.4.2c (RAM512k) Midi devices: 0: Sound Blaster 16 Timers: 0: System clock Mixers: 0: Sound Blaster 1: AWE32 Equalizer -------------------------------------------------------------- and I only get this after specifying the sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330 opl3 io=0x388 and insmodding the awe_wave.o (whereas on 2.0.35, I didn't need to do this). i.e there are no Installed drivers ! isapnp.conf is identical between the two cases. I'm using isapnptools-1.15a-3 modutils-2.1.85-9 binutils-2.9.1.0.15-1 on a system which is basically RH5.2 Does anyone know what I have not set up correctly ? Kernel config options for sound in 2.1.128 are as follows ... CONFIG_SOUND=m # CONFIG_SOUND_ES1370 is not set # CONFIG_SOUND_ES1371 is not set # CONFIG_SOUND_SONICVIBES is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set CONFIG_SOUND_OSS=m # CONFIG_SOUND_PAS is not set CONFIG_SOUND_SB=m CONFIG_SOUND_ADLIB=m # CONFIG_SOUND_GUS is not set # CONFIG_SOUND_MPU401 is not set # CONFIG_SOUND_PSS is not set # CONFIG_SOUND_MSS is not set # CONFIG_SOUND_SSCAPE is not set # CONFIG_SOUND_TRIX is not set # CONFIG_SOUND_MAD16 is not set # CONFIG_SOUND_WAVEFRONT is not set # CONFIG_SOUND_CS4232 is not set CONFIG_SOUND_OPL3SA2=m # CONFIG_SOUND_MAUI is not set # CONFIG_SOUND_SGALAXY is not set # CONFIG_SOUND_OPL3SA1 is not set # CONFIG_SOUND_SOFTOSS is not set CONFIG_SOUND_YM3812=m # CONFIG_SOUND_VMIDI is not set # CONFIG_SOUND_UART6850 is not set # # Additional low level sound drivers # CONFIG_LOWLEVEL_SOUND=y # CONFIG_ACI_MIXER is not set CONFIG_AWE32_SYNTH=m TIA -- Andy Jefferson