From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bill Nottingham Date: Wed, 13 Jan 1999 16:18:31 +0000 Subject: Re: Yamaha opl3 Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sound@vger.kernel.org Eric Barendt (ebarendt@speedchoice.com) said: > Ok... I've been fighting with this on-board sound card since I installed > linux a few months ago.. It's on my Tyan 1696 motherboard. What do I > need to do to get this sound card working? I've found things about > compiling the opti something or other drivers into the kernel, but that > didn't work (unless I did it wrong). I also had some 3rd party > software, which worked.. but I'd prefer to just have the kernel control > everything. Assuming it's an OPL3-SA2/3/x (most likely), you should be able to configure the card with isapnptools and use the OPL3-SAx driver in 2.1.late/2.2.0pre. (If you're using 2.2.0pre, you'd want to get at least 2.2.0pre6, as that fixes bugs in the detection code, IIRC.) Bill