From: 陈耀明 <cim@188.net>
To: linux-sound@vger.kernel.org
Subject: Yamaha 724 PCI without PC/PCI link
Date: Fri, 22 Jan 1999 03:25:36 +0000 [thread overview]
Message-ID: <marc-linux-sound-91710095802713@msgid-missing> (raw)
My sound card is Yamaha 724 PCI without PC/PCI interface
on my mother board. Linux kernel is 2.1.132. The pciutils
is 1.09.
When I boot to DOS first and initialize it in DOS, then
loadlin linux, the sound card can sound 8bit sounds. I used
lspci and setpci to check its configuration registers, found
40.l is 0x90003f5f and 4c.w is 0x8011 against the defaults.
My /etc/conf.modules looks like the following:
pre-install sb /sbin/setpci -d 1073:0004 40.lê003f5f
pre-install sb /sbin/setpci -d 1073:0004 4c.wÄ11
alias sound sb
options sb -k io=0x220 irq\x10 dma=1 type=4
alias midi opl3
options opl3 -k io=0x388
But when I boot linux directly, the modules can be loaded,
but no sound. I think there must require some additional
init commands. Cound anyone give me some implication?
Yaoming Chen
===================Mr. Yaoming Chen
Da Tang Telecommunication Corp. Chengdu
No. 22 Dacisi Avenue
Chengdu, Sichuan
610062, China
Tel: 28-6763552
Fax: 28-6763555
Home page: http://www.tianfu.net/~ming/
===================
next reply other threads:[~1999-01-22 3:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
1999-01-22 3:25 陈耀明 [this message]
1999-01-25 12:08 ` Yamaha 724 PCI without PC/PCI link Dan Hollis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-linux-sound-91710095802713@msgid-missing \
--to=cim@188.net \
--cc=linux-sound@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox