From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rodrigo Castro Date: Tue, 16 Feb 1999 14:35:13 +0000 Subject: mp3's not playing? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: linux-sound@vger.kernel.org I have exactly the same problem as this guy. In my case, I have a SB32 PnP. Any idea? P.S.: I put a SB16 non-PnP to test and it worked really fine. I guess the problem is in PnP, am I right? Well, that's it Rodrigo Castro Computer Science undergraduate student at University of S=E3o Paulo Scott Olsson - scohop wrote: > I have a soundblaster 16 plug and play card that has been giving me the > fits. I've tried everything (well, almost... everything except what will > eventually work...) to no avail. Below, I outlined how I've been going > at this... if you have a similar card, please correct whatever ignorant > greenie mistake I'm surely making/looking over... thanks!! > > I boot, isapnp loads and says it's configuring the card for dma's 1,5 > and irq5... then, I load the following modules as such... > ---- > /sbin/insmod soundcore > /sbin/insmod sound > /sbin/insmod uart401 > /sbin/insmod sb io=3D0x220 irq=3D5 dma=3D1 mpu_io=3D0x330 > /sbin/insmod opl3 io=3D0x388 > --- > Below, I cat'd my /dev/sndstat for reference... I don't really > understand how some of it applies, but I'm assuming something > should be listed under "installed drivers"... (???) > ---- > > OSS/Free:3.8s2++-971130 > Load type: Driver loaded as a module > Kernel: Linux .csh.uiuc.edu 2.2.1 #13 Mon Feb 15 15:09:11 EST 1999 i686 > Config options: 0 > > Installed drivers: > > Card config: > > Audio devices: > 0: Sound Blaster 16 (4.13) > > Synth devices: > 0: Yamaha OPL3 > > Midi devices: > 0: Sound Blaster 16 > > Timers: > 0: System clock > > Mixers: > 0: Sound Blaster > > ---- > > After the modules are all (??) loaded, I cat an au file to /dev/dsp or > /dev/audio and it will play fine, but mp3's will not play > through any of the players I have tried... (x11amp, freeamp, amp, > xaudio, mpg123, newplayer) > > when I've tried with an mp3player like newplayer it complains about dma > problems with the following error message... > > Sound: DMA (output) timed out - IRQ/DRQ config error? > > Is there a specific procedure or some other driver/module that needs to > be configured and/or loaded before mp3's/wav's will play? Also, where > (script, etc) can I add the modules to load them every boot? > > Any help will be very VERY... umm, helpful? > THANKS!!! > > scott olsson > > -- please email your response as welll... thanks again. > > -- > Scott Olsson - scohop > olsson@uiuc.edu