From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rodrigo Castro Date: Tue, 16 Feb 1999 15:05:17 +0000 Subject: Re: mp3's not playing? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sound@vger.kernel.org On Wed, 17 Feb 1999, Keith Duthie wrote: > On Tue, 16 Feb 1999, Rodrigo Castro wrote: > > > > I boot, isapnp loads and says it's configuring the card for dma's 1,5 > > > and irq5... then, I load the following modules as such... > > > > /sbin/insmod sb io=0x220 irq=5 dma=1 mpu_io=0x330 > > > > Sound: DMA (output) timed out - IRQ/DRQ config error? > > Read the excerpts. It reads like the other guy is a moron. Try adding in > dma16=5 (or dma2=5 whichever the sb driver uses). That sounds like (one > of) the problem(s). > Oh, I forget mentioning that but I already have dma16=5. That's not the problem. Maybe the guy who wrote the message I fowarded have forgetten but I haven't. > Besides which, the options should be in the /etc/modules.conf file. And > another thing: I believe the mpu should have an irq option, eg mpu_irq=9 > (or mpuirq=9, whichever name the soundblaster uses) > No. MPU does not need IRQ when we are talking about Sound Blaster cards. The configuration, in compilation (of kernel or modules), must be filled with -1 when using SB cards. > If you use RedHat, then try the sndconfig utility. It doesn't work for me, > but it may work for you. I use Debian distro. Thank you anyway! ;-) Rodrigo Castro Computer Science undergraduate student - University of Sao Paulo Rudeness is a weak man's imitation of strength.