From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rodrigo Castro Date: Wed, 17 Feb 1999 12:19:48 +0000 Subject: Re: Sound Card Problems Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sound@vger.kernel.org Nothing worked! :-( I changed my 16-bit DMA to 6. Nothing. I changed post-install of adlib module. Nothing. Here goes my isapnp.conf # $Id: pnpdump.c,v 1.1.1.2 1998/01/07 05:17:47 fred Exp $ # This is free software, see the sources for details. # This software has NO WARRANTY, use at your OWN RISK # # For details of this file format, see isapnp.conf(5) # # For latest information on isapnp and pnpdump see: # http://www.roestock.demon.co.uk/isapnptools/ # # Compiler flags: -DREALTIME -DNEEDSETSCHEDULER -DNEEDNANOSLEEP # # Trying port address 0203 # Board 1 has serial identifier 0f 00 00 4d 75 44 00 8c 0e # (DEBUG) (READPORT 0x0203) (ISOLATE) (IDENTIFY *) (VERIFYLD N) # Card 1: (serial identifier 0f 00 00 4d 75 44 00 8c 0e) # Vendor Id CTL0044, Serial Number 19829, checksum 0x0F. # Version 1.0, Vendor version 1.0 # ANSI string -->Creative SB32 PnP<-- # # Logical device id CTL0031 # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE CTL0044/19829 (LD 0 # ANSI string -->Audio<-- (INT 0 (IRQ 5 (MODE +E))) (DMA 0 (CHANNEL 1)) (DMA 1 (CHANNEL 6)) (IO 0 (BASE 0x0220)) (IO 1 (BASE 0x0330)) (IO 2 (BASE 0x0388)) (ACT Y) )) # # Logical device id CTL2011 # # Edit the entries below to uncomment out the configuration required. # Compatible device id PNP0600 # ANSI string -->IDE<-- (CONFIGURE CTL0044/19829 (LD 1 # ANSI string -->IDE<-- (INT 0 (IRQ 10 (MODE +E))) (IO 0 (BASE 0x0168)) (IO 1 (BASE 0x036e)) (ACT Y) )) # # Logical device id CTL0021 # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE CTL0044/19829 (LD 2 # ANSI string -->WaveTable<-- (IO 0 (BASE 0x0620)) (IO 1 (BASE 0x0A20)) (IO 2 (BASE 0x0E20)) (ACT Y) )) # # Logical device id CTL7001 # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE CTL0044/19829 (LD 3 # Compatible device id PNPb02f # ANSI string -->Game<-- (IO 0 (BASE 0x0200)) (ACT Y) )) # # Logical device id CTL0051 # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE CTL0044/19829 (LD 4 # ANSI string -->StereoEnhance<-- (IO 0 (BASE 0x0100)) (ACT Y) )) # End tag... Checksum 0x00 (OK) # Returns all cards to the "Wait for Key" state (WAITFORKEY) -------- conf.modules -------- ### This file is automatically generated by update-modules # # Please do not edit this file directly. If you want to change or add # anything please take a look at the files in /etc/modutils and read # the manpage for update-modules. # alias block-major-7 loop # Uncomment the network protocols you don't want loaded: # alias net-pf-2 off # IPv4 alias net-pf-3 off alias net-pf-4 off # IPX alias net-pf-5 off # DDP / appletalk alias net-pf-10 off # IPv6 # Other aliases: alias net-pf-17 af_packet # packet mode (tcpdump, etc.) alias netalias-2 ip_alias alias char-major-4 serial alias char-major-10-130 softdog alias iso9660 isofs alias ppp-compress-21 bsd_comp alias ppp-compress-24 ppp_deflate alias binfmt-0064 binfmt_aout alias binfmt--310 binfmt_java # If you use the IDE tape driver as a module, uncomment the next two lines: # alias block-major-3 ide-probe # alias char-major-37 ide-tape #alias off path[boot]=/lib/modules # State module paths in order of importance path[fs]=/lib/modules/`uname -r` path[net]=/lib/modules/`uname -r` path[scsi]=/lib/modules/`uname -r` path[block]=/lib/modules/`uname -r` path[cdrom]=/lib/modules/`uname -r` path[ipv4]=/lib/modules/`uname -r` path[ipv6]=/lib/modules/`uname -r` path[misc]=/lib/modules/`uname -r` path[video]=/lib/modules/`uname -r` path[sound]=/lib/modules/`uname -r` path[fc4]=/lib/modules/`uname -r` path[fs]=/lib/modules/`kernelversion` path[net]=/lib/modules/`kernelversion` path[scsi]=/lib/modules/`kernelversion` path[block]=/lib/modules/`kernelversion` path[cdrom]=/lib/modules/`kernelversion` path[ipv4]=/lib/modules/`kernelversion` path[ipv6]=/lib/modules/`kernelversion` path[misc]=/lib/modules/`kernelversion` path[video]=/lib/modules/`kernelversion` path[sound]=/lib/modules/`kernelversion` path[fc4]=/lib/modules/`kernelversion` path[fs]=/lib/modules path[net]=/lib/modules path[scsi]=/lib/modules path[block]=/lib/modules path[cdrom]=/lib/modules path[ipv4]=/lib/modules path[ipv6]=/lib/modules path[misc]=/lib/modules path[video]=/lib/modules path[sound]=/lib/modules path[fc4]=/lib/modules alias parport_lowlevel parport_pc alias char-major-14 sb pre-install sb /sbin/modprobe "-k" "adlib_card" options sb io=0x220 irq=5 dma=1 dma16=6 mpu_io=0x330 options adlib_card io=0x388 # FM synthesizer #options sound dmabuf=1 Hoping we have success in fixing that, Rodrigo Castro Computer Science undergraduate student - University of Sao Paulo Rudeness is a weak man's imitation of strength.