From mboxrd@z Thu Jan 1 00:00:00 1970 From: Conde Martinez Rodolfo Date: Mon, 22 Feb 1999 02:37:15 +0000 Subject: AWE64 Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sound@vger.kernel.org Hi all, i'm new here, heard about the list and here i'm with a problem with SB AWE64 PnP (i guess i'm not the first one to ask about it) With my SB AWE64, i haven't been able to make the Awe wave table work, awe_wave says it doesn't dettect it and i tried uncommenting the lines in awe_config.h about the base io address and the DRAM size, it prints then i load a font with sfxload and try drvmidi but there isn't any sound, playmidi says something like no playback device found aborting.....What can it be ??...the other modules load well and detect the card, Could it be that the card has enabled the mpu-401 uart, i read in the manuall that it's disabled setting a jumpper ??? Acording to OSS/Comercial my card is a Creative SB AWE64 PnP type 4 About the PnP think i have used first the bios to configure devices, it works ok with the modem know, and with the Sb it configures it too....supposed because everythink works but the wave table, and then i tried isapnptools with the three io's required for the table but didn't work :( Any ideas would be apreciated..... Thanks for your answers !!!!! ------------------------------------------------------------------------------- | Rodolfo Conde Mtz Universidad Nacional Autonoma de Mexico | | ICQ 14757500 Facultad de Ciencias | | e-mails: Ciencias de la Computacion | | rconde@ada.fciencias.unam.mx | | conderodolfo@usa.net | -------------------------------------------------------------------------------