From mboxrd@z Thu Jan 1 00:00:00 1970 From: Leonard Michlmayr Date: Wed, 24 Feb 1999 08:30:33 +0000 Subject: MSS / wrong device in `/dev/sndstat' ? Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sound@vger.kernel.org After many trials i didn't bring sound to work. I hope that someone is able to help me. I have a Microsoft Windows Sound System card *ducks* and i cannot play any sounds by piping something to /dev/audio and i hear some very silent noise if i pipe soume sound to /dev/dsp. Did i miss something about configuring the volume, or did something else go wrong ? Details: -------- I have compiled the 2.2.2 kernel without module support and with the MSS/WSS support enabled (0x530, IRQ 10, DMA 1, secondary DMA 0) (using `make xconfig') When booting the kernel reports to detect MSS at 0x534, but /dev/sndstat reports a Compaq Deskpro XL at 0x530 irq 10 drq 1,1 Recording sound with `dd bs=8k count=4 if=/dev/audio of=test.au' works, as far as i can say without hearing test.au Sound works fine with Windows. Thank You ! Leonard Michlmayr