From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jin Ko Date: Thu, 25 Feb 1999 05:48:59 +0000 Subject: Re: Yamaha OPL3-Sax sound card Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sound@vger.kernel.org AFAIK, Yamaha OPL3sa emulated Windows Sound System(MSS), SoundBlaster Pro and MPU401. You may enable all of'em to get sound works properly. -jin On Wed, 24 Feb 1999, Adam Crews wrote: > > On my Tecra 8000, the manual says that it is a OPL3-SAx card, but the > sound modules that seems to power it is the MSS module. > > I havent played with it too much, but I do know that the MSS module does > play 16bit sound through the card. > > -Adam > > On Wed, 24 Feb 1999, Ramon Nieto wrote: > > | Date: Wed, 24 Feb 1999 08:46:29 -0800 (PST) > | From: Ramon Nieto > | To: linux-sound@vger.rutgers.edu > | Cc: linux-laptop@vger.rutgers.edu > | Subject: Yamaha OPL3-Sax sound card > | > | i have a Yamaha OPL3-SAx sound card on a toshiba satellite 2500cds. > | i instaled linux red hat 5.1 and i know this can't recognize the sound > | card i tried to configure it as a sound blaster but it only play in 8 > | bits mode, the sound card support 16 bit mode. > | > | So i compiled the 2.2.0 kernel with all the support for sound card as > | modules. but i can't configure the sound card yet. > | > | anybody knows what to do? what can i write in the conf.modules? how > | can i use the OSS modules? > | > | > | BTW the isapnptools don't recognize the sound card as a PnP card. > | > | > | > | > | _________________________________________________________ > | DO YOU YAHOO!? > | Get your free @yahoo.com address at http://mail.yahoo.com > | > ----------------------------------------------------------------- Jin Ko mailto:jin@nuri.net Network Engineer http://ghost.nuri.net/ International Backbone Group phone:+82-2-531-7924 Inet, Inc. -- a PSINet Company in Korea fax:+82-2-555-8127