From mboxrd@z Thu Jan 1 00:00:00 1970 From: Josh Steiner Date: Wed, 07 Apr 1999 03:04:49 +0000 Subject: AWE64g recognized as a SB? Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sound@vger.kernel.org I'm running 2.2.3, with SB support compiled as modules. Why is my Sound Blaster AWEg isa pnp being recognized only as a SB16? Below is my system setup info. Thanks for any help. --- Joshua W. H. Steiner - jsteiner@antioch-college.edu - http://joschi.base.org "Reality is the leading cause of stress among those in touch with it" - Jane Wagner [root@bw66 joschi]# cat /etc/conf.modules alias eth0 3c509 alias sound sb options -k sb io=0x220 irq=5 dma=1 dma16=5 [root@bw66 joschi]# cat /dev/sndstat OSS/Free:3.8s2++-971130 Load type: Driver loaded as a module Kernel: Linux bw66 2.2.3-5 #4 Thu Apr 1 13:27:54 PST 1999 i686 Config options: 0 Installed drivers: Card config: Audio devices: 0: Sound Blaster 16 (4.16) (DUPLEX) Synth devices: Midi devices: Timers: 0: System clock Mixers: 0: Sound Blaster [root@bw66 joschi]# /sbin/lsmod Module Size Used by joy-analog 3864 0 joystick 6912 0 [joy-analog] isofs 17096 1 (autoclean) vmnet 8844 3 vmmon 9996 0 (unused) vfat 11304 2 (autoclean) fat 23904 2 (autoclean) [vfat] sb 31192 3 uart401 5588 3 [sb] sound 54532 0 [sb uart401] soundlow 208 0 [sound] soundcore 2100 5 [sb sound] [root@bw66 joschi]# cat /etc/isapnp.conf # $Id: pnpdump.c,v 1.10 1997/07/14 22:30:47 fox Exp $ # This is free software, see the sources for details. # This software has NO WARRANTY, use at your OWN RISK # # For details of this file format, see isapnp.conf(5) # # For latest information on isapnp and pnpdump see: # http://www.roestock.demon.co.uk/isapnptools/ # # Compiler flags: -DREALTIME -DNEEDSETSCHEDULER # # Trying port address 0203 # Board 1 has serial identifier 40 09 53 7c 8f 9e 00 8c 0e # (DEBUG) (READPORT 0x0203) (ISOLATE) (IDENTIFY *) # ANSI string -->Creative SB AWE64 Gold<-- (CONFIGURE CTL009e/156466319 (LD 0 # ANSI string -->Audio<-- (INT 0 (IRQ 5 (MODE +E))) (DMA 0 (CHANNEL 1)) (DMA 1 (CHANNEL 5)) (IO 0 (BASE 0x220)) (IO 1 (BASE 0x0330)) (IO 2 (BASE 0x0388)) (ACT Y) )) (CONFIGURE CTL009e/156466319 (LD 1 # ANSI string -->Game<--~ (IO 0 (BASE 0x0200)) (ACT Y) )) (CONFIGURE CTL009e/156466319 (LD 2 # ANSI string -->WaveTable<-- (IO 0 (BASE 0x0620)) (IO 0 (BASE 0x0A20)) (IO 0 (BASE 0x0E20)) (ACT Y) )) # Returns all cards to the "Wait for Key" state (WAITFORKEY)