From mboxrd@z Thu Jan 1 00:00:00 1970 From: Keith Duthie Date: Mon, 26 Apr 1999 17:34:34 +0000 Subject: Re: 3D Soundpro PCI Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sound@vger.kernel.org On Mon, 26 Apr 1999, Eduardo Trettel wrote: > I've already read this doc, but it describes the ISA version of the board, > which is much easier to configure, as long as the I/0 addresses are the > same of the SB16. I'm not sure how to handle this on the PCI version. > Any hints will be welcomed. Isn't this set up by the pci subsystem? If so, then try looking at /proc/pci to get the io port and interrupt. If not, it may not actually *be* pci. Note: you could try assigning an interrupt to it in bios ( If the kernel driver doesn't work, you could try alsa at http://www.alsa-project.org ) -- Understanding is a three edged sword. Do you *want* to get the point? http://www.albatross.co.nz/~psycho/ O-