From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bill Nottingham Date: Mon, 24 May 1999 02:17:11 +0000 Subject: Re: Can't get AZT1008 sound card to work under RH6.0 Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sound@vger.kernel.org Cummings, Kevin (kcummings@clariion.com) said: > The isapnp.conf file looks like (simplified): > AZT1008 PnP Sound Device > LD 0 IDE CDROM DISABLED > IO 0 BASE 0x530 > IO 1 BASE 0x330 > LD 1 AUDIO > IO 0 BASE 0x220 > (do I want more than 1 IO device here???? IO 1 0x388?? IO 2 0x534 ???) That's odd - it has settings for 0x530/0x534 in both LD 0 and LD 1 - that doesn't seem right. > The sound module (/etc/conf.modules) thinks it is loading an Aztech Sound Galaxy > driver. Is this right???? The Aztech source code seems to think so! That is the Sound Galaxy driver. Unfortunately, I've heard reports of it not working well with some SG cards - in those cases, no matter what you do, it seems unable to initialize the WSS compat. on the card; however, you should be able to at least get it to work in SBPro compatibility mode. What does your isapnp.conf & conf.modules look like? Bill