From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Masters Date: Thu, 19 Aug 1999 01:08:37 +0000 Subject: Multiple sbs with module Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sound@vger.kernel.org Hi, I currently have an SB 64 AWE GOLD PNP set up using the "sb" module (and it's friends....) with settings IRQ 5. DMA 1 and 5, standard stuff. I have a lower spec'd SB 16 (vibra) PNP value card (which *does* work with Linux as it used to be my main card). I have the two using resources correctly and have resolved all conflicts. The trouble is, I must use modules due to the pnp situation with the cards (bios is less than 6months old (AMI), but it still doesn't get it right if left to itself) so I have been running isapnp during boot and then adding the sb driver. However, I now wish to have *2* sb's with the same module. This would be trivially easy with the code in the kernel (simply setting SB2_BASE et al), but I must have it in the module. Can this be achieved? If not, can anyone suggest/provide a patch which will do this/tell me to upgrade kernel to 2.3.xx etc... I have 2.2.11. Thanx guys. I can't see this as being impossible it's just that the docs don't mention two cards with a module. Jon. -- Jonathan C. Masters (jonathan@oxlug.org) PGP: www.brookes.ac.uk/~95227860/KEY "Upon this rock I will build my church and the gates of hell shall not prevail against it". -- Matthew 16, 17-18