From mboxrd@z Thu Jan 1 00:00:00 1970 From: SkyViper Date: Mon, 24 Jan 2000 12:07:24 +0000 Subject: es1370 in Kern 2.2.14 Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sound@vger.kernel.org When I boot I get a very high static sound. This static sounds like my card is being over driven. Quieter sounds are discernable, but masked with static.The problem is intermittent in that it does not occur on every boot, and follows no pattern. If the boot is good, then restarting X has no ill effect. If the boot is bad, restarting X does not correct the problem. The card still works fine in Kernel 2.2.11 using insmod es1370, but I will try 2.2.13 and 2.2.12. I used xconfig to set the Kernel, and configured it to use sound and the es1370 and Joystick. (By the way, I don't think the joystick works, but I am not sure) I am running Red Hat 6.1 Hardware list: Asus P5AB Motherboard = AMD K6-2 400 (OC to 450) Sound Card = PCI SRS727 (Ensoniq es1370) Video Adapter = PCI 3Dfx Voodoo3 2000 Modem = ISA Motorola Voice Surfer 56K V90 (firmware Upgradded from KFlex) Hard drives = Maxtor 850, Samsung 2.1, Fuji 10.2 Partitioned by Partition Magic 5.0 Linux is on one of these parts. RAM = 64M PC 100 single stick Mouse = MS Intellmouse 1.1a Keyboard = MS Natural Joystick = CH F16 Fighterstick, CH Throttle, CH Pro Pedals Known Running Server/Module items: XFree 3.3.5, Gnome, KDE Glide 2 and 3 loaded per 3Dfx sight Modules: 3dfx on the 3.3.5 server OUTPUT from sh scripts/ver_linux : Linux localhose.localdomain 2.2.14 #9 Sat Jan 22 17:09:25 EST 2000 i586 unknown Kernel modules 2.1.121 Gnu C egcs-2.91.66 Binutils 2.9.1.-.24 Linux C Library 2.1.2 Dynamic linker ldd (GNU libc) 2.1.2 Procps 2.0.4 Mount 2.9u Net-tools 1.53 Console-tools 199.03.02 Sh-utils 2.0 Modules Loaded 3dfx Tom H.