From mboxrd@z Thu Jan 1 00:00:00 1970 From: AJ Lewis Date: Mon, 24 Jan 2000 17:48:38 +0000 Subject: Re: es1370 in Kern 2.2.14 Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sound@vger.kernel.org Try running the K6-2 at the correct clock speed. The K6-2 400 and 450 have a tendency to run extremely hot. The OC could cause erratic performance in all subsystems. -- AJ Lewis lewi0235@tc.umn.edu "Now I consider the anti-Linux group at Microsoft to be just a Linux user in disguise. They're trying to find the really bad problems in Linux. They haven't produced much so far but I expect that we'll get some really good bug reports from them..." - Linus Thorvalds at the Linux BOF at the USENIX 1999 On Mon, 24 Jan 2000, SkyViper wrote: > When I boot I get a very high static sound. > This static sounds like my card is being over driven. Quieter sounds are > discernable, but masked with static.The problem is intermittent in that > it does not occur on every boot, and follows no pattern. > If the boot is good, then restarting X has no ill effect. If the boot is > bad, restarting X does not correct the problem. The card still works > fine in Kernel 2.2.11 using insmod es1370, but I will try 2.2.13 and > 2.2.12. > > I used xconfig to set the Kernel, and configured it to use sound and the > es1370 and Joystick. (By the way, I don't think the joystick works, but > I am not sure) > > I am running Red Hat 6.1 > Hardware list: > Asus P5AB > Motherboard = AMD K6-2 400 (OC to 450) > Sound Card = PCI SRS727 (Ensoniq es1370) > Video Adapter = PCI 3Dfx Voodoo3 2000 > Modem = ISA Motorola Voice Surfer 56K V90 (firmware Upgradded from > KFlex) > Hard drives = Maxtor 850, Samsung 2.1, Fuji 10.2 Partitioned by > Partition Magic 5.0 > Linux is on one of these parts. > RAM = 64M PC 100 single stick > Mouse = MS Intellmouse 1.1a > Keyboard = MS Natural > Joystick = CH F16 Fighterstick, CH Throttle, CH Pro Pedals > > Known Running Server/Module items: > XFree 3.3.5, Gnome, KDE > Glide 2 and 3 loaded per 3Dfx sight > Modules: > 3dfx on the 3.3.5 server > > > > > OUTPUT from sh scripts/ver_linux : > Linux localhose.localdomain 2.2.14 #9 Sat Jan 22 17:09:25 EST 2000 i586 > unknown > Kernel modules 2.1.121 > Gnu C egcs-2.91.66 > Binutils 2.9.1.-.24 > Linux C Library 2.1.2 > Dynamic linker ldd (GNU libc) 2.1.2 > Procps 2.0.4 > Mount 2.9u > Net-tools 1.53 > Console-tools 199.03.02 > Sh-utils 2.0 > Modules Loaded 3dfx > > > Tom H. > >