From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michael Black Date: Thu, 24 Feb 2000 22:47:03 +0000 Subject: Yamaha YMF724 (fwd) Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sound@vger.kernel.org ---------- Forwarded message ---------- Date: Fri, 18 Feb 2000 02:02:41 +0200 (EET) From: Michael Black To: scottm@interlog.com Subject: Yamaha YMF724 hi there. This PCI board is givin' me headaches. It's sold under the name Yamaha DS-XG, but on their site extacly name is Yamaha DS-1 (YMF724F-V chipset). I'm kinda lost with your driver explanation... First of all I can use only one IRQ (the DOS configuration program only one allows) and one DMA channel(?). I updated to the newest 'doze driver with directX7 compatibility and suprise..it's shows in "DS-XG Legacy System" a setting for another IRQ. Couldn't see the point. Anyway only 1 DMA channel. I tried with DMA 0,3 both free..but can u explain IO 4 0x0100 - 0x0FFE card's own base address for its control I/O ports I haven't seen this...and I digged enough. In the DOS program I have D-DMA(?) setting. I left it on 8000h. Please explain how do I get & set that base address. Here's a dump from my /dev/sndstat. [root@apollo]~# cat /dev/sndstat OSS/Free:3.8s2++-971130 Load type: Driver compiled into kernel Kernel: Linux apollo.c7.utcluj.ro 2.2.13 #3 Thu Feb 17 21:04:39 EET 2000 i586 Config options: 0 Installed drivers: Type 10: MS Sound System Type 27: Compaq Deskpro XL Type 42: OPL3SA2 Type 45: OPL3SA2 MSS Type 43: OPL3SA2 MIDI Type 5: Roland MPU-401 Type 26: MPU-401 (UART) Card config: OPL3SA2 at 0x388 irq 11 drq 0,3 (OPL3SA2 MSS at 0x530 irq 11 drq 0,3) OPL3SA2 MIDI at 0x330 irq 5 drq 0 (Compaq Deskpro XL at 0x530 irq 11 drq 0,3) Audio devices: Synth devices: Midi devices: 0: MPU-401 0.0 Midi interface #1 Timers: 0: System clock Mixers: Please make some light here. :) Wat I'm doing wrong? /dx