From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Leif Rasmussen Date: Mon, 03 Apr 2000 14:49:07 +0000 Subject: Recording with SB16? Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sound@vger.kernel.org I have a SB16 (non Vibra) card that I yesterday attempted to record with, both through the mike and line input, using wavrec/wavplay and sox (with the rec and play frontends). I could get some faint recording through the mike input, but I wasn't able to get anything properly through the line input, even though the sound from there would go clearly to the speakers connected to the speaker output. Running sox with the 'stat' option sowed that there was no input and that volume would have to be set to 'inf'. Putting the line signal I had through the mike (disconnecting the speakers first :-) gave a very faint, but also very distorted recording. Using sox with 'stat' this time said the volume would have to be set to 14, which I did. A lot of distortion as I would have expected. It therefore looks like something is not right, but I can't figure out what? I just want something as simple as possible to record from the mike and line inputs, preferably being able to mix the two. I'm using linux-2.3.99-pre3, but also tried it with 2.3.33 that was at hand, with the same result. Otherwise it is an almost stock Slackware 7.0 on a P133. Thanks for any input, Peter