From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kevin Page Date: Thu, 14 Jun 2001 21:49:36 +0000 Subject: es1371 microphone volume problems Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sound@vger.kernel.org Hi, I've done a bit of trawling around, and it seems quite a few people have had problems with 'no sound' with the es1371 (in this case a SB PCI128), but I couldn't find a solution. I'm running linux 2.4.2 with redhat mods (i.e. stock RH7.1). The sound input is fine under windows. At first I thought there was no sound input through the microphone at all, but then I found if I tapped the mic (prety hard) then that got picked up - but certainly nothing if I were speaking. Then I played around with the mixer, and if I put the mic level, IGain and then main volume (for playback) up to their maximum values I could just make out recorded speech from the mic - but it was still pretty quiet. Do I have any chance of getting this to work properly? (The main volume's a bit high for everyday use ;) I saw that the es1370 had a micgain option, but the es1371 doesn't - could it be the same sort of problem? Regards, kev -- Kevin Page Intelligence, Agents, Multimedia +44 (0) 23 80594490 Electronics and Computer Science krp@ecs.soton.ac.uk University of Southampton, UK - To unsubscribe from this list: send the line "unsubscribe linux-sound" in the body of a message to majordomo@vger.kernel.org