From: Alexey Dobriyan <adobriyan@sw.ru>
To: Al Viro <viro@ftp.linux.org.uk>
Cc: linux-kernel@vger.kernel.org, davej@codemonkey.org.uk,
Pierre Ossman <drzeus@drzeus.cx>,
akpm@osdl.org, linux-sparse@vger.kernel.org
Subject: idio{,ma}tic typos (was Re: + fix-vm_can_nonlinear-check-in-sys_remap_file_pages.patch added to -mm tree)
Date: Wed, 10 Oct 2007 14:45:40 +0400 [thread overview]
Message-ID: <20071010104540.GA6366@localhost.sw.ru> (raw)
["if (!x & y)" patch from yanzheng@]
["if (!x & y)" patch from adobriyan@]
["if (!x & y)" patches from viro@]
While we're at it, below is somewhat ugly sparse patch for detecting
"&& 0x" typos.
diff --git a/evaluate.c b/evaluate.c
index c0e9d17..186756b 100644
--- a/evaluate.c
+++ b/evaluate.c
@@ -877,6 +877,13 @@ static struct symbol *evaluate_logical(struct expression *expr)
if (!evaluate_conditional(expr->right, 0))
return NULL;
+ if (expr->op == SPECIAL_LOGICAL_AND) {
+ if (expr->left->type == EXPR_VALUE && expr->left->orig_in_hex)
+ warning(expr->pos, "dubious && 0x");
+ if (expr->right->type == EXPR_VALUE && expr->right->orig_in_hex)
+ warning(expr->pos, "dubious && 0x");
+ }
+
expr->ctype = &bool_ctype;
if (expr->flags) {
if (!(expr->left->flags & expr->right->flags & Int_const_expr))
diff --git a/expression.c b/expression.c
index 289927a..9bcf586 100644
--- a/expression.c
+++ b/expression.c
@@ -361,6 +361,7 @@ got_it:
expr->flags = Int_const_expr;
expr->ctype = ctype_integer(modifiers);
expr->value = value;
+ expr->orig_in_hex = (str[0] == '0' && (str[1] == 'x' || str[1] == 'X'));
return;
Eoverflow:
error_die(expr->pos, "constant %s is too big even for unsigned long long",
@@ -70,6 +70,7 @@ struct expression {
struct {
unsigned long long value;
unsigned taint;
+ unsigned int orig_in_hex:1;
};
// EXPR_FVALUE
Here are wonders that it found:
drivers/media/video/se401.c:1283:13: warning: dubious && 0x
if (!cp[2] && SE401_FORMAT_BAYER) {
err("Bayer format not supported!");
return 1;
}
known issue, I sent a patch about it.
drivers/mmc/host/tifm_sd.c:183:9: warning: dubious && 0x
if ((r_data->flags & MMC_DATA_WRITE)
&& DATA_CARRY)
writel(host->bounce_buf_data[0],
host->dev->addr
+ SOCK_MMCSD_DATA);
given that DATA_CARRY is always used together with ->cmd_flags,
this place is asking for obvious fixlet:
[PATCH] tifm_sd.c: fix DATA_CARRY check
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
---
drivers/mmc/host/tifm_sd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mmc/host/tifm_sd.c
+++ b/drivers/mmc/host/tifm_sd.c
@@ -180,7 +180,7 @@ static void tifm_sd_transfer_data(struct tifm_sd *host)
host->sg_pos++;
if (host->sg_pos == host->sg_len) {
if ((r_data->flags & MMC_DATA_WRITE)
- && DATA_CARRY)
+ && (host->cmd_flags & DATA_CARRY))
writel(host->bounce_buf_data[0],
host->dev->addr
+ SOCK_MMCSD_DATA);
drivers/net/wireless/arlan-main.c:439:3: warning: dubious && 0x
drivers/net/wireless/arlan-main.c:439:3: warning: dubious && 0x
drivers/net/wireless/arlan-main.c:439:3: warning: dubious && 0x
drivers/net/wireless/arlan-main.c:439:3: warning: dubious && 0x
#define setPowerOff(dev){\
writeControlRegister(dev,readControlRegister(dev) |
(ARLAN_POWER && ARLAN_ACCESS));
^^^
[PATCH] arlan: fix "x && y" typo
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
---
drivers/net/wireless/arlan.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/arlan.h
+++ b/drivers/net/wireless/arlan.h
@@ -485,7 +485,7 @@ struct arlan_private {
#define clearClearInterrupt(dev){\
writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CLEAR_INTERRUPT);}
#define setPowerOff(dev){\
- writeControlRegister(dev,readControlRegister(dev) | (ARLAN_POWER && ARLAN_ACCESS));\
+ writeControlRegister(dev,readControlRegister(dev) | (ARLAN_POWER & ARLAN_ACCESS));\
writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);}
#define setPowerOn(dev){\
writeControlRegister(dev,readControlRegister(dev) & ~(ARLAN_POWER)); }
next reply other threads:[~2007-10-10 10:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-10 10:45 Alexey Dobriyan [this message]
2007-10-10 11:23 ` idio{,ma}tic typos (was Re: + fix-vm_can_nonlinear-check-in-sys_remap_file_pages.patch added to -mm tree) Andreas Schwab
2007-10-10 11:45 ` Josh Triplett
2007-10-11 7:35 ` Alexey Dobriyan
2007-10-11 9:00 ` Kyle Moffett
2007-10-11 16:27 ` Josh Triplett
2007-10-10 13:35 ` Morten Welinder
2007-10-10 18:08 ` Josh Triplett
2007-10-10 19:02 ` Pavel Roskin
2007-10-10 18:22 ` Pierre Ossman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071010104540.GA6366@localhost.sw.ru \
--to=adobriyan@sw.ru \
--cc=akpm@osdl.org \
--cc=davej@codemonkey.org.uk \
--cc=drzeus@drzeus.cx \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sparse@vger.kernel.org \
--cc=viro@ftp.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).