[PATCH v4 10/11 6.1.y] minmax.h: simplify the variants of clamp()

[Eliav Farber <farbere@amazon.com>]

From: David Laight <David.Laight@ACULAB.COM>

[ Upstream commit 495bba17cdf95e9703af1b8ef773c55ef0dfe703 ]

Always pass a 'type' through to __clamp_once(), pass '__auto_type' from
clamp() itself.

The expansion of __types_ok3() is reasonable so it isn't worth the added
complexity of avoiding it when a fixed type is used for all three values.

Link: https://lkml.kernel.org/r/8f69f4deac014f558bab186444bac2e8@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
---
 include/linux/minmax.h | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/include/linux/minmax.h b/include/linux/minmax.h
index 75fb7a6ad4c6..2bbdd5b5e07e 100644
--- a/include/linux/minmax.h
+++ b/include/linux/minmax.h
@@ -183,29 +183,29 @@
 #define __clamp(val, lo, hi)	\
 	((val) >= (hi) ? (hi) : ((val) <= (lo) ? (lo) : (val)))
 
-#define __clamp_once(val, lo, hi, uval, ulo, uhi) ({				\
-	__auto_type uval = (val);						\
-	__auto_type ulo = (lo);							\
-	__auto_type uhi = (hi);							\
+#define __clamp_once(type, val, lo, hi, uval, ulo, uhi) ({			\
+	type uval = (val);							\
+	type ulo = (lo);							\
+	type uhi = (hi);							\
 	BUILD_BUG_ON_MSG(statically_true(ulo > uhi),				\
 		"clamp() low limit " #lo " greater than high limit " #hi);	\
 	BUILD_BUG_ON_MSG(!__types_ok3(uval, ulo, uhi),				\
 		"clamp("#val", "#lo", "#hi") signedness error");		\
 	__clamp(uval, ulo, uhi); })
 
-#define __careful_clamp(val, lo, hi) \
-	__clamp_once(val, lo, hi, __UNIQUE_ID(v_), __UNIQUE_ID(l_), __UNIQUE_ID(h_))
+#define __careful_clamp(type, val, lo, hi) \
+	__clamp_once(type, val, lo, hi, __UNIQUE_ID(v_), __UNIQUE_ID(l_), __UNIQUE_ID(h_))
 
 /**
- * clamp - return a value clamped to a given range with strict typechecking
+ * clamp - return a value clamped to a given range with typechecking
  * @val: current value
  * @lo: lowest allowable value
  * @hi: highest allowable value
  *
- * This macro does strict typechecking of @lo/@hi to make sure they are of the
- * same type as @val.  See the unnecessary pointer comparisons.
+ * This macro checks @val/@lo/@hi to make sure they have compatible
+ * signedness.
  */
-#define clamp(val, lo, hi) __careful_clamp(val, lo, hi)
+#define clamp(val, lo, hi) __careful_clamp(__auto_type, val, lo, hi)
 
 /**
  * clamp_t - return a value clamped to a given range using a given type
@@ -217,7 +217,7 @@
  * This macro does no typechecking and uses temporary variables of type
  * @type to make all the comparisons.
  */
-#define clamp_t(type, val, lo, hi) __careful_clamp((type)(val), (type)(lo), (type)(hi))
+#define clamp_t(type, val, lo, hi) __careful_clamp(type, val, lo, hi)
 
 /**
  * clamp_val - return a value clamped to a given range using val's type
@@ -230,7 +230,7 @@
  * type and @lo and @hi are literals that will otherwise be assigned a signed
  * integer type.
  */
-#define clamp_val(val, lo, hi) clamp_t(typeof(val), val, lo, hi)
+#define clamp_val(val, lo, hi) __careful_clamp(typeof(val), val, lo, hi)
 
 /*
  * Do not check the array parameter using __must_be_array().
-- 
2.47.3