[PATCH] spi/spi_s3c64xx: Warn if PIO transfers time out

[Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>]

When using PIO we have a timeout for the TX and RX FIFOs to ensure that
the data actually gets transferred. Warn if we hit that timeout - it
should never happen, but this makes sure we'll find out if it does.

Signed-off-by: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
---
 drivers/spi/spi_s3c64xx.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c
index 7e627f7..f72e1c0 100644
--- a/drivers/spi/spi_s3c64xx.c
+++ b/drivers/spi/spi_s3c64xx.c
@@ -200,6 +200,9 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
 		val = readl(regs + S3C64XX_SPI_STATUS);
 	} while (TX_FIFO_LVL(val, sci) && loops--);
 
+	if (loops == 0)
+		dev_warn(&sdd->pdev->dev, "Timed out flushing TX FIFO\n");
+
 	/* Flush RxFIFO*/
 	loops = msecs_to_loops(1);
 	do {
@@ -210,6 +213,9 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
 			break;
 	} while (loops--);
 
+	if (loops == 0)
+		dev_warn(&sdd->pdev->dev, "Timed out flushing RX FIFO\n");
+
 	val = readl(regs + S3C64XX_SPI_CH_CFG);
 	val &= ~S3C64XX_SPI_CH_SW_RST;
 	writel(val, regs + S3C64XX_SPI_CH_CFG);
-- 
1.7.1


------------------------------------------------------------------------------
This SF.net email is sponsored by 

Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev