From: "Uwe Kleine-König" <u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: Jason Wang <jason77.wang-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: amit.kucheria-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org,
Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Jason Wang <jason77.wang-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 13/16] ARM: mx5/clock-mx51: add spi clocks
Date: Fri, 17 Sep 2010 11:54:31 +0200 [thread overview]
Message-ID: <1284717274-12850-13-git-send-email-u.kleine-koenig@pengutronix.de> (raw)
In-Reply-To: <20100917095247.GB30441-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
From: Jason Wang <jason77.wang@gmail.com>
Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
arch/arm/mach-mx5/clock-mx51.c | 57 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 57 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
index 0e39698..68aef2d 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -764,6 +764,42 @@ static struct clk kpp_clk = {
.id = 0,
};
+/* eCSPI */
+static unsigned long clk_ecspi_get_rate(struct clk *clk)
+{
+ u32 reg, pred, podf;
+
+ reg = __raw_readl(MXC_CCM_CSCDR2);
+
+ pred = (reg & MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK) >>
+ MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET;
+ podf = (reg & MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK) >>
+ MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET;
+
+ return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent),
+ (pred + 1) * (podf + 1));
+}
+
+static int clk_ecspi_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg, mux;
+
+ mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk,
+ &lp_apm_clk);
+
+ reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK;
+ reg |= mux << MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET;
+ __raw_writel(reg, MXC_CCM_CSCMR1);
+
+ return 0;
+}
+
+static struct clk ecspi_main_clk = {
+ .parent = &pll3_sw_clk,
+ .get_rate = clk_ecspi_get_rate,
+ .set_parent = clk_ecspi_set_parent,
+};
+
#define DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, e, d, p, s) \
static struct clk name = { \
.id = i, \
@@ -816,6 +852,24 @@ DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
NULL, NULL, &ipg_clk, NULL);
+/* eCSPI */
+DEFINE_CLOCK_FULL(ecspi1_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
+ NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
+ &ipg_clk, &spba_clk);
+DEFINE_CLOCK(ecspi1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG10_OFFSET,
+ NULL, NULL, &ecspi_main_clk, &ecspi1_ipg_clk);
+DEFINE_CLOCK_FULL(ecspi2_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG11_OFFSET,
+ NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
+ &ipg_clk, &aips_tz2_clk);
+DEFINE_CLOCK(ecspi2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG12_OFFSET,
+ NULL, NULL, &ecspi_main_clk, &ecspi2_ipg_clk);
+
+/* CSPI */
+DEFINE_CLOCK(cspi_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
+ NULL, NULL, &ipg_clk, &aips_tz2_clk);
+DEFINE_CLOCK(cspi_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG13_OFFSET,
+ NULL, NULL, &ipg_clk, &cspi_ipg_clk);
+
#define _REGISTER_CLOCK(d, n, c) \
{ \
.dev_id = d, \
@@ -839,6 +893,9 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
_REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk)
+ _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk)
+ _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk)
+ _REGISTER_CLOCK("imx51-cspi.0", NULL, cspi_clk)
};
static void clk_tree_init(void)
--
1.7.2.3
------------------------------------------------------------------------------
Start uncovering the many advantages of virtual appliances
and start using them to simplify application deployment and
accelerate your shift to cloud computing.
http://p.sf.net/sfu/novell-sfdev2dev
_______________________________________________
spi-devel-general mailing list
spi-devel-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/spi-devel-general
next prev parent reply other threads:[~2010-09-17 9:54 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-02 7:51 [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver Jason Wang
2010-09-02 7:51 ` [PATCH 1/6] spi-imx: add CSPI and eCSPI support for i.MX51 MCU Jason Wang
2010-09-02 7:52 ` [PATCH 2/6] i.MX5/clock: add eCSPI and CSPI clock definitions Jason Wang
2010-09-02 7:52 ` [PATCH 3/6] mx5: add support to dynamically register spi_imx devices (imx51 3ds) Jason Wang
2010-09-02 7:52 ` [PATCH 4/6] mx5/iomux: add iomux definitions for eCSPI2 on the imx51_3ds board Jason Wang
2010-09-02 7:52 ` [PATCH 5/6] mx51_3ds: add eCSPI2 support " Jason Wang
2010-09-02 7:52 ` [PATCH 6/6] mx51_3ds: add SPI NOR flash in the board init stage Jason Wang
2010-09-02 15:05 ` [PATCH 5/6] mx51_3ds: add eCSPI2 support on the imx51_3ds board Uwe Kleine-König
2010-09-03 6:24 ` Jason Wang
2010-09-02 15:02 ` [PATCH 3/6] mx5: add support to dynamically register spi_imx devices (imx51 3ds) Uwe Kleine-König
2010-09-03 6:22 ` Jason Wang
2010-09-02 15:01 ` [PATCH 2/6] i.MX5/clock: add eCSPI and CSPI clock definitions Uwe Kleine-König
2010-09-03 6:22 ` Jason Wang
2010-09-10 9:47 ` Uwe Kleine-König
[not found] ` <20100910094714.GF30558-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-09-10 10:04 ` Lothar Waßmann
2010-09-13 3:31 ` Jason Wang
2010-09-02 14:53 ` [PATCH 1/6] spi-imx: add CSPI and eCSPI support for i.MX51 MCU Uwe Kleine-König
2010-09-02 15:11 ` Lothar Waßmann
2010-09-02 17:29 ` Baruch Siach
2010-09-02 17:57 ` Uwe Kleine-König
2010-09-03 8:49 ` Lothar Waßmann
2010-09-03 6:16 ` Jason Wang
2010-09-03 7:54 ` Uwe Kleine-König
2010-09-02 8:27 ` [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver Uwe Kleine-König
2010-09-02 10:07 ` Jason Wang
2010-09-02 14:39 ` Uwe Kleine-König
2010-09-02 14:41 ` [PATCH 1/6] ARM: mx51: clean up mx51 header Uwe Kleine-König
2010-09-02 14:41 ` [PATCH 2/6] ARM: mx51: fix naming of spi related defines Uwe Kleine-König
2010-09-02 14:42 ` [PATCH 3/6] ARM: imx: change the way spi-imx devices are registered Uwe Kleine-König
2010-09-02 14:42 ` [PATCH 4/6] ARM: mx51: Add spi clock and spi_imx device registration Uwe Kleine-König
[not found] ` <1283438523-19697-4-git-send-email-u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-09-03 5:46 ` Jason Wang
2010-09-02 14:42 ` [PATCH 5/6] spi-imx: Add i.MX51 support Uwe Kleine-König
2010-09-09 5:33 ` Grant Likely
2010-09-09 7:27 ` Uwe Kleine-König
2010-09-02 14:42 ` [PATCH 6/6] ARM: mx5/mx51_babbage: Add spi support Uwe Kleine-König
2010-09-03 3:18 ` [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver Jason Wang
2010-09-03 6:41 ` Amit Kucheria
2010-09-03 9:34 ` Robert Schwebel
2010-09-17 9:52 ` Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 01/16] spi/imx: default to m on platforms that have such devices Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 03/16] spi/imx: get rid of more ifs depending on the used cpu Uwe Kleine-König
[not found] ` <20100917095247.GB30441-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-09-17 9:54 ` [PATCH 02/16] spi/imx: convert driver to use platform ids Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 04/16] spi/imx: save the spi chip select in config struct, not the gpio to use Uwe Kleine-König
[not found] ` <1284717274-12850-4-git-send-email-u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-09-17 11:11 ` Lothar Waßmann
2010-09-17 11:20 ` Russell King - ARM Linux
2010-09-19 8:47 ` Jason Wang
2010-09-17 9:54 ` [PATCH 05/16] spi/imx: add support for imx51's eCSPI and CSPI Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 06/16] ARM: imx: change the way spi-imx devices are registered Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 07/16] ARM: imx: use platform ids for spi_imx devices Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 08/16] ARM: mx51: clean up mx51 header Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 09/16] ARM: mx51: fix naming of spi related defines Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 10/16] ARM: mx5: add spi_imx device registration Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 11/16] ARM: mx5/clock-mx51: refactor ccgr callbacks to use common code Uwe Kleine-König
2010-09-17 9:54 ` Uwe Kleine-König [this message]
2010-09-17 9:54 ` [PATCH 14/16] ARM: mx5/iomux-mx51: add iomux definitions for eCSPI2 on the imx51_3ds board Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 15/16] ARM: mx5/mx51_3ds: add eCSPI2 support " Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 16/16] ARM: mx5/mx51_3ds: add SPI NOR flash in the board init stage Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 12/16] ARM: mx5/clock-mx51: new macro that defines a clk with all members Uwe Kleine-König
2010-09-19 8:53 ` [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver Jason Wang
2010-09-20 15:33 ` Uwe Kleine-König
2010-09-21 1:39 ` Jason Wang
2010-09-24 7:00 ` Grant Likely
2010-09-24 9:11 ` Uwe Kleine-König
2010-09-24 16:12 ` Grant Likely
2010-09-24 18:18 ` Uwe Kleine-König
[not found] ` <20100902143908.GK14214-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-10-08 9:24 ` [PATCH 7/6] spi/imx: Support different fifo sizes Uwe Kleine-König
[not found] ` <1286529841-20800-1-git-send-email-u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-10-08 16:39 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1284717274-12850-13-git-send-email-u.kleine-koenig@pengutronix.de \
--to=u.kleine-koenig-bicnvbalz9megne8c9+irq@public.gmane.org \
--cc=amit.kucheria-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org \
--cc=jason77.wang-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).