From: "Uwe Kleine-König" <u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: Jason Wang <jason77.wang-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: amit.kucheria-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org,
Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Jason Wang <jason77.wang-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 16/16] ARM: mx5/mx51_3ds: add SPI NOR flash in the board init stage
Date: Fri, 17 Sep 2010 11:54:34 +0200 [thread overview]
Message-ID: <1284717274-12850-16-git-send-email-u.kleine-koenig@pengutronix.de> (raw)
In-Reply-To: <20100917095247.GB30441-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
From: Jason Wang <jason77.wang@gmail.com>
A 2M bytes SPI NOR flash(sst25vf016b) is soldered on the mx51_3ds
board. So add the corresponding device for it.
Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
arch/arm/mach-mx5/board-mx51_3ds.c | 13 +++++++++++++
1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index c9c4128..b9d3331 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -13,6 +13,7 @@
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -145,6 +146,16 @@ static const struct spi_imx_master mx51_3ds_ecspi2_pdata __initconst = {
.num_chipselect = ARRAY_SIZE(mx51_3ds_spi2_cs),
};
+static struct spi_board_info mx51_3ds_spi_nor_device[] = {
+ {
+ .modalias = "m25p80",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 1,
+ .mode = SPI_MODE_0,
+ .platform_data = NULL,},
+};
+
/*
* Board specific initialization.
*/
@@ -155,6 +166,8 @@ static void __init mxc_board_init(void)
mxc_init_imx_uart();
imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata);
+ spi_register_board_info(mx51_3ds_spi_nor_device,
+ ARRAY_SIZE(mx51_3ds_spi_nor_device));
if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT))
printk(KERN_WARNING "Init of the debugboard failed, all "
--
1.7.2.3
------------------------------------------------------------------------------
Start uncovering the many advantages of virtual appliances
and start using them to simplify application deployment and
accelerate your shift to cloud computing.
http://p.sf.net/sfu/novell-sfdev2dev
_______________________________________________
spi-devel-general mailing list
spi-devel-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/spi-devel-general
next prev parent reply other threads:[~2010-09-17 9:54 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-02 7:51 [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver Jason Wang
2010-09-02 7:51 ` [PATCH 1/6] spi-imx: add CSPI and eCSPI support for i.MX51 MCU Jason Wang
2010-09-02 7:52 ` [PATCH 2/6] i.MX5/clock: add eCSPI and CSPI clock definitions Jason Wang
2010-09-02 7:52 ` [PATCH 3/6] mx5: add support to dynamically register spi_imx devices (imx51 3ds) Jason Wang
2010-09-02 7:52 ` [PATCH 4/6] mx5/iomux: add iomux definitions for eCSPI2 on the imx51_3ds board Jason Wang
2010-09-02 7:52 ` [PATCH 5/6] mx51_3ds: add eCSPI2 support " Jason Wang
2010-09-02 7:52 ` [PATCH 6/6] mx51_3ds: add SPI NOR flash in the board init stage Jason Wang
2010-09-02 15:05 ` [PATCH 5/6] mx51_3ds: add eCSPI2 support on the imx51_3ds board Uwe Kleine-König
2010-09-03 6:24 ` Jason Wang
2010-09-02 15:02 ` [PATCH 3/6] mx5: add support to dynamically register spi_imx devices (imx51 3ds) Uwe Kleine-König
2010-09-03 6:22 ` Jason Wang
2010-09-02 15:01 ` [PATCH 2/6] i.MX5/clock: add eCSPI and CSPI clock definitions Uwe Kleine-König
2010-09-03 6:22 ` Jason Wang
2010-09-10 9:47 ` Uwe Kleine-König
[not found] ` <20100910094714.GF30558-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-09-10 10:04 ` Lothar Waßmann
2010-09-13 3:31 ` Jason Wang
2010-09-02 14:53 ` [PATCH 1/6] spi-imx: add CSPI and eCSPI support for i.MX51 MCU Uwe Kleine-König
2010-09-02 15:11 ` Lothar Waßmann
2010-09-02 17:29 ` Baruch Siach
2010-09-02 17:57 ` Uwe Kleine-König
2010-09-03 8:49 ` Lothar Waßmann
2010-09-03 6:16 ` Jason Wang
2010-09-03 7:54 ` Uwe Kleine-König
2010-09-02 8:27 ` [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver Uwe Kleine-König
2010-09-02 10:07 ` Jason Wang
2010-09-02 14:39 ` Uwe Kleine-König
2010-09-02 14:41 ` [PATCH 1/6] ARM: mx51: clean up mx51 header Uwe Kleine-König
2010-09-02 14:41 ` [PATCH 2/6] ARM: mx51: fix naming of spi related defines Uwe Kleine-König
2010-09-02 14:42 ` [PATCH 3/6] ARM: imx: change the way spi-imx devices are registered Uwe Kleine-König
2010-09-02 14:42 ` [PATCH 4/6] ARM: mx51: Add spi clock and spi_imx device registration Uwe Kleine-König
[not found] ` <1283438523-19697-4-git-send-email-u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-09-03 5:46 ` Jason Wang
2010-09-02 14:42 ` [PATCH 5/6] spi-imx: Add i.MX51 support Uwe Kleine-König
2010-09-09 5:33 ` Grant Likely
2010-09-09 7:27 ` Uwe Kleine-König
2010-09-02 14:42 ` [PATCH 6/6] ARM: mx5/mx51_babbage: Add spi support Uwe Kleine-König
2010-09-03 3:18 ` [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver Jason Wang
2010-09-03 6:41 ` Amit Kucheria
2010-09-03 9:34 ` Robert Schwebel
2010-09-17 9:52 ` Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 01/16] spi/imx: default to m on platforms that have such devices Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 03/16] spi/imx: get rid of more ifs depending on the used cpu Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 12/16] ARM: mx5/clock-mx51: new macro that defines a clk with all members Uwe Kleine-König
[not found] ` <20100917095247.GB30441-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-09-17 9:54 ` [PATCH 02/16] spi/imx: convert driver to use platform ids Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 04/16] spi/imx: save the spi chip select in config struct, not the gpio to use Uwe Kleine-König
[not found] ` <1284717274-12850-4-git-send-email-u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-09-17 11:11 ` Lothar Waßmann
2010-09-17 11:20 ` Russell King - ARM Linux
2010-09-19 8:47 ` Jason Wang
2010-09-17 9:54 ` [PATCH 05/16] spi/imx: add support for imx51's eCSPI and CSPI Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 06/16] ARM: imx: change the way spi-imx devices are registered Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 07/16] ARM: imx: use platform ids for spi_imx devices Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 08/16] ARM: mx51: clean up mx51 header Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 09/16] ARM: mx51: fix naming of spi related defines Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 10/16] ARM: mx5: add spi_imx device registration Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 11/16] ARM: mx5/clock-mx51: refactor ccgr callbacks to use common code Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 13/16] ARM: mx5/clock-mx51: add spi clocks Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 14/16] ARM: mx5/iomux-mx51: add iomux definitions for eCSPI2 on the imx51_3ds board Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 15/16] ARM: mx5/mx51_3ds: add eCSPI2 support " Uwe Kleine-König
2010-09-17 9:54 ` Uwe Kleine-König [this message]
2010-09-19 8:53 ` [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver Jason Wang
2010-09-20 15:33 ` Uwe Kleine-König
2010-09-21 1:39 ` Jason Wang
2010-09-24 7:00 ` Grant Likely
2010-09-24 9:11 ` Uwe Kleine-König
2010-09-24 16:12 ` Grant Likely
2010-09-24 18:18 ` Uwe Kleine-König
[not found] ` <20100902143908.GK14214-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-10-08 9:24 ` [PATCH 7/6] spi/imx: Support different fifo sizes Uwe Kleine-König
[not found] ` <1286529841-20800-1-git-send-email-u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-10-08 16:39 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1284717274-12850-16-git-send-email-u.kleine-koenig@pengutronix.de \
--to=u.kleine-koenig-bicnvbalz9megne8c9+irq@public.gmane.org \
--cc=amit.kucheria-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org \
--cc=jason77.wang-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).