From: Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>
To: davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org,
lrg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org, dbrownell@users
Subject: [PATCH 07/12] davinci: add tnetv107x evm regulators
Date: Thu, 14 Oct 2010 14:38:50 -0400 [thread overview]
Message-ID: <1287081535-2864-8-git-send-email-cyril@ti.com> (raw)
In-Reply-To: <1287081535-2864-1-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
This patch adds regulator and spi board info definitions for the tps6524x
power management IC found on tnetv107x evm boards.
Signed-off-by: Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>
---
arch/arm/mach-davinci/board-tnetv107x-evm.c | 91 +++++++++++++++++++++++++++
1 files changed, 91 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index 52378bf..2f13544 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -26,6 +26,9 @@
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/driver.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
@@ -260,7 +263,95 @@ static struct platform_device spi_master_device = {
.dev.platform_data = &spi_master_data,
};
+static struct regulator_consumer_supply usb_consumers[] = {
+ REGULATOR_SUPPLY("vbus", "musb_hdrc.1"),
+};
+
+static struct regulator_consumer_supply lcd_consumers[] = {
+ REGULATOR_SUPPLY("vlcd", "tps6116x"),
+};
+
+static struct regulator_init_data regulators[] = {
+ {
+ .constraints = {
+ .name = "DCDC1",
+ .min_uV = 1000000,
+ .max_uV = 1000000,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ {
+ .constraints = {
+ .name = "DCDC2",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ {
+ .constraints = {
+ .name = "DCDC3",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ {
+ .constraints = {
+ .name = "LDO1",
+ .min_uV = 4800000,
+ .max_uV = 4800000,
+ .min_uA = 400000,
+ .max_uA = 1500000,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ {
+ .constraints = {
+ .name = "LDO1",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ {
+ .num_consumer_supplies = ARRAY_SIZE(usb_consumers),
+ .consumer_supplies = usb_consumers,
+ .constraints = {
+ .name = "USB",
+ .min_uV = 5000000,
+ .max_uV = 5000000,
+ .min_uA = 200000,
+ .max_uA = 1000000,
+ .valid_ops_mask = REGULATOR_CHANGE_CURRENT |
+ REGULATOR_CHANGE_STATUS,
+ },
+ },
+ {
+ .num_consumer_supplies = ARRAY_SIZE(lcd_consumers),
+ .consumer_supplies = lcd_consumers,
+ .constraints = {
+ .name = "LCD",
+ .min_uV = 5000000,
+ .max_uV = 5000000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+};
+
static struct spi_board_info spi_info[] __initconst = {
+ {
+ .modalias = "tps6524x",
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ .platform_data = regulators,
+ },
};
static __init void tnetv107x_evm_board_init(void)
--
1.7.0.4
next prev parent reply other threads:[~2010-10-14 18:38 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-14 18:38 [PATCH 00/12] tnetv107x ssp driver stack Cyril Chemparathy
[not found] ` <1287081535-2864-1-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2010-10-14 18:38 ` [PATCH 01/12] misc: add driver for sequencer serial port Cyril Chemparathy
[not found] ` <1287081535-2864-2-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2010-10-16 5:00 ` Grant Likely
[not found] ` <20101016050055.GH21170-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2010-10-18 13:56 ` Cyril Chemparathy
[not found] ` <4CBC520B.9070502-l0cyMroinI0@public.gmane.org>
2010-10-18 14:59 ` Grant Likely
2010-10-14 18:38 ` [PATCH 02/12] davinci: add tnetv107x ssp platform device Cyril Chemparathy
2010-10-14 18:38 ` [PATCH 03/12] davinci: add ssp config for tnetv107x evm board Cyril Chemparathy
2010-10-14 18:38 ` [PATCH 04/12] spi: add ti-ssp spi master driver Cyril Chemparathy
[not found] ` <1287081535-2864-5-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2010-10-16 5:05 ` Grant Likely
2010-10-14 18:38 ` [PATCH 05/12] davinci: add spi devices on tnetv107x evm Cyril Chemparathy
2010-10-14 18:38 ` [PATCH 06/12] regulator: add driver for tps6524x regulator Cyril Chemparathy
[not found] ` <1287081535-2864-7-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2010-10-14 21:03 ` Mark Brown
[not found] ` <20101014210323.GB14479-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2010-10-18 12:50 ` Cyril Chemparathy
2010-10-16 10:00 ` Mark Brown
2010-10-14 18:38 ` Cyril Chemparathy [this message]
[not found] ` <1287081535-2864-8-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2010-10-14 21:05 ` [PATCH 07/12] davinci: add tnetv107x evm regulators Mark Brown
2010-10-14 18:38 ` [PATCH 08/12] gpio: add ti-ssp virtual gpio driver Cyril Chemparathy
2010-10-14 18:38 ` [PATCH 09/12] davinci: add tnetv107x evm ti-ssp gpio device Cyril Chemparathy
2010-10-14 18:38 ` [PATCH 10/12] backlight: add support for tps6116x controller Cyril Chemparathy
2010-10-14 18:38 ` [PATCH 11/12] davinci: add tnetv107x evm backlight device Cyril Chemparathy
2010-10-14 18:38 ` [PATCH 12/12] davinci: add tnetv107x evm i2c eeprom device Cyril Chemparathy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1287081535-2864-8-git-send-email-cyril@ti.com \
--to=cyril-l0cymroini0@public.gmane.org \
--cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \
--cc=davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org \
--cc=dbrownell@users \
--cc=lrg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).