[PATCH v2 09/12] davinci: add tnetv107x evm ti-ssp gpio device

[Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>]

This patch adds definitions to hook up one of the ti-ssp ports to the SSP GPIO
driver.

Signed-off-by: Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>
---
 arch/arm/mach-davinci/board-tnetv107x-evm.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index d4c3d18..270ba26 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -40,6 +40,8 @@
 #include <mach/ti_ssp.h>
 #include <mach/tnetv107x.h>
 
+#define SSP_GPIO_START		128
+
 #define EVM_MMC_WP_GPIO		21
 #define EVM_MMC_CD_GPIO		24
 #define EVM_SPI_CS_GPIO		54
@@ -236,9 +238,22 @@ static const struct ti_ssp_spi_data spi_master_data = {
 	.select		= spi_select_device,
 };
 
+static const struct ti_ssp_gpio_data ssp_gpio_data = {
+	.start		= SSP_GPIO_START,
+};
+
 static struct ti_ssp_data ssp_config = {
 	.out_clock	= 250 * 1000,
 	.dev_data	= {
+		[0] = {
+			.dev_name = "ti-ssp-gpio",
+			.iosel = SSP_PIN_SEL(0, SSP_IN) |
+				 SSP_PIN_SEL(1, SSP_IN) |
+				 SSP_PIN_SEL(2, SSP_IN) |
+				 SSP_PIN_SEL(3, SSP_IN),
+			.pdata = &ssp_gpio_data,
+			.pdata_sz = sizeof(ssp_gpio_data),
+		},
 		[1] = {
 			.dev_name = "ti-ssp-spi",
 			.iosel = SSP_PIN_SEL(0, SSP_CLOCK)	|
-- 
1.7.0.4


------------------------------------------------------------------------------
Download new Adobe(R) Flash(R) Builder(TM) 4
The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly 
Flex(R) Builder(TM)) enable the development of rich applications that run
across multiple browsers and platforms. Download your free trials today!
http://p.sf.net/sfu/adobe-dev2dev