From: Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>
To: davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
lrg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org,
broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org,
rpurdie@rpsys
Cc: dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org,
Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org,
alan-qBU/x9rampVanCEyBjwyrvXRex20P6io@public.gmane.org
Subject: [PATCH v5 08/12] gpio: add ti-ssp gpio driver
Date: Mon, 15 Nov 2010 14:12:10 -0500 [thread overview]
Message-ID: <1289848334-8695-9-git-send-email-cyril@ti.com> (raw)
In-Reply-To: <1289848334-8695-1-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
TI's SSP controller pins can be directly read and written to behave like a
GPIO. This patch adds a GPIO driver that exposes such functionality.
Signed-off-by: Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>
---
drivers/mfd/Kconfig | 10 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/ti-ssp-gpio.c | 205 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/ti_ssp.h | 4 +
4 files changed, 220 insertions(+), 0 deletions(-)
create mode 100644 drivers/mfd/ti-ssp-gpio.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 7dcc03a..b193580 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -102,6 +102,16 @@ config MFD_TI_SSP_SPI
To compile this driver as a module, choose M here: the
module will be called ti-ssp-spi.
+config MFD_TI_SSP_GPIO
+ tristate "TI Sequencer Serial Port - GPIO Support"
+ depends on GPIOLIB && MFD_TI_SSP
+ help
+ Say yes here to support a GPIO interface on TI SSP port pins.
+ Each SSP port translates into 4 GPIOs.
+
+ This driver can also be built as a module. If so, the module
+ will be called ti-ssp-gpio.
+
config HTC_EGPIO
bool "HTC EGPIO support"
depends on GENERIC_HARDIRQS && GPIOLIB && ARM
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index ba97f48..87b5de8 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o
obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
obj-$(CONFIG_MFD_TI_SSP) += ti-ssp.o
obj-$(CONFIG_MFD_TI_SSP_SPI) += ti-ssp-spi.o
+obj-$(CONFIG_MFD_TI_SSP_GPIO) += ti-ssp-gpio.o
obj-$(CONFIG_MFD_STMPE) += stmpe.o
obj-$(CONFIG_MFD_TC35892) += tc35892.o
diff --git a/drivers/mfd/ti-ssp-gpio.c b/drivers/mfd/ti-ssp-gpio.c
new file mode 100644
index 0000000..a3e909b
--- /dev/null
+++ b/drivers/mfd/ti-ssp-gpio.c
@@ -0,0 +1,205 @@
+/*
+ * Sequencer Serial Port (SSP) based virtual GPIO driver
+ *
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ti_ssp.h>
+
+struct ti_ssp_gpio {
+ struct gpio_chip chip;
+#define chip2gpio(chip) container_of(chip, struct ti_ssp_gpio, chip)
+ struct device *dev;
+ spinlock_t lock;
+ u8 out;
+ u32 iosel;
+};
+
+static int direction_in(struct gpio_chip *chip, unsigned gpio_num)
+{
+ struct ti_ssp_gpio *gpio = chip2gpio(chip);
+ int error = 0;
+
+ spin_lock(&gpio->lock);
+
+ gpio->iosel &= ~SSP_PIN_MASK(gpio_num);
+ gpio->iosel |= SSP_PIN_SEL(gpio_num, SSP_IN);
+
+ error = ti_ssp_set_iosel(gpio->dev, gpio->iosel);
+
+ spin_unlock(&gpio->lock);
+
+ return error;
+}
+
+static int direction_out(struct gpio_chip *chip, unsigned gpio_num, int val)
+{
+ struct ti_ssp_gpio *gpio = chip2gpio(chip);
+ int error;
+
+ spin_lock(&gpio->lock);
+
+ gpio->iosel &= ~SSP_PIN_MASK(gpio_num);
+ gpio->iosel |= SSP_PIN_SEL(gpio_num, SSP_OUT);
+
+ error = ti_ssp_set_iosel(gpio->dev, gpio->iosel);
+
+ if (error < 0)
+ goto error;
+
+ if (val)
+ gpio->out |= BIT(gpio_num);
+ else
+ gpio->out &= ~BIT(gpio_num);
+
+ error = ti_ssp_raw_write(gpio->dev, gpio->out);
+
+error:
+ spin_unlock(&gpio->lock);
+ return error;
+}
+
+static int value_get(struct gpio_chip *chip, unsigned gpio_num)
+{
+ struct ti_ssp_gpio *gpio = chip2gpio(chip);
+ int ret;
+
+ spin_lock(&gpio->lock);
+
+ ret = ti_ssp_raw_read(gpio->dev);
+ if (ret >= 0)
+ ret = (ret & BIT(gpio_num)) ? 1 : 0;
+
+ spin_unlock(&gpio->lock);
+ return ret;
+}
+
+static void value_set(struct gpio_chip *chip, unsigned gpio_num, int val)
+{
+ struct ti_ssp_gpio *gpio = chip2gpio(chip);
+
+ spin_lock(&gpio->lock);
+
+ if (val)
+ gpio->out |= BIT(gpio_num);
+ else
+ gpio->out &= ~BIT(gpio_num);
+
+ ti_ssp_raw_write(gpio->dev, gpio->out);
+
+ spin_unlock(&gpio->lock);
+}
+
+static int __devinit ti_ssp_gpio_probe(struct platform_device *pdev)
+{
+ const struct ti_ssp_gpio_data *pdata = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ struct ti_ssp_gpio *gpio;
+ int error;
+
+ if (!pdata) {
+ dev_err(dev, "platform data not found\n");
+ return -EINVAL;
+ }
+
+ gpio = kzalloc(sizeof(*gpio), GFP_KERNEL);
+ if (!gpio) {
+ dev_err(dev, "cannot allocate driver data\n");
+ return -ENOMEM;
+ }
+
+ gpio->dev = dev;
+ gpio->iosel = SSP_PIN_SEL(0, SSP_IN) | SSP_PIN_SEL(1, SSP_IN) |
+ SSP_PIN_SEL(2, SSP_IN) | SSP_PIN_SEL(3, SSP_IN);
+ error = ti_ssp_set_iosel(gpio->dev, gpio->iosel);
+ if (error < 0) {
+ dev_err(dev, "gpio io setup failed (%d)\n", error);
+ goto error;
+ }
+
+ spin_lock_init(&gpio->lock);
+ platform_set_drvdata(pdev, gpio);
+
+ gpio->chip.base = pdata->start;
+ gpio->chip.ngpio = 4;
+ gpio->chip.dev = &pdev->dev;
+ gpio->chip.label = "ti_ssp_gpio";
+ gpio->chip.owner = THIS_MODULE;
+ gpio->chip.get = value_get;
+ gpio->chip.set = value_set;
+ gpio->chip.direction_input = direction_in;
+ gpio->chip.direction_output = direction_out;
+
+ error = gpiochip_add(&gpio->chip);
+ if (error < 0) {
+ dev_err(dev, "gpio chip registration failed (%d)\n", error);
+ goto error;
+ }
+
+ dev_info(dev, "ssp gpio interface registered\n");
+ return 0;
+
+error:
+ kfree(gpio);
+ return error;
+}
+
+static int __devexit ti_ssp_gpio_remove(struct platform_device *pdev)
+{
+ struct ti_ssp_gpio *gpio = platform_get_drvdata(pdev);
+ int error;
+
+ error = gpiochip_remove(&gpio->chip);
+ if (error < 0)
+ return error;
+ kfree(gpio);
+ return 0;
+}
+
+static struct platform_driver ti_ssp_gpio_driver = {
+ .probe = ti_ssp_gpio_probe,
+ .remove = __devexit_p(ti_ssp_gpio_remove),
+ .driver = {
+ .name = "ti-ssp-gpio",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init ti_ssp_gpio_init(void)
+{
+ return platform_driver_register(&ti_ssp_gpio_driver);
+}
+subsys_initcall(ti_ssp_gpio_init);
+
+static void __exit ti_ssp_gpio_exit(void)
+{
+ platform_driver_unregister(&ti_ssp_gpio_driver);
+}
+module_exit(ti_ssp_gpio_exit);
+
+MODULE_DESCRIPTION("GPIO interface for TI-SSP");
+MODULE_AUTHOR("Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ti-ssp-gpio");
diff --git a/include/linux/mfd/ti_ssp.h b/include/linux/mfd/ti_ssp.h
index dbb4b43..10c65bb 100644
--- a/include/linux/mfd/ti_ssp.h
+++ b/include/linux/mfd/ti_ssp.h
@@ -38,6 +38,10 @@ struct ti_ssp_spi_data {
void (*select)(int cs);
};
+struct ti_ssp_gpio_data {
+ int start;
+};
+
/*
* Sequencer port IO pin configuration bits. These do not correlate 1-1 with
* the hardware. The iosel field in the port data combines iosel1 and iosel2,
--
1.7.1
------------------------------------------------------------------------------
Centralized Desktop Delivery: Dell and VMware Reference Architecture
Simplifying enterprise desktop deployment and management using
Dell EqualLogic storage and VMware View: A highly scalable, end-to-end
client virtualization framework. Read more!
http://p.sf.net/sfu/dell-eql-dev2dev
next prev parent reply other threads:[~2010-11-15 19:12 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-15 19:12 [PATCH v5 00/12] tnetv107x ssp drivers Cyril Chemparathy
[not found] ` <1289848334-8695-1-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2010-11-15 19:12 ` [PATCH v5 01/12] misc: add driver for sequencer serial port Cyril Chemparathy
[not found] ` <1289848334-8695-2-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2010-11-16 7:10 ` Grant Likely
[not found] ` <20101116071047.GE4074-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2010-11-16 16:15 ` Cyril Chemparathy
[not found] ` <4CE2AE3C.4040805-l0cyMroinI0@public.gmane.org>
2010-11-16 20:35 ` Grant Likely
[not found] ` <AANLkTik76EY8Xh01YP2Tep6k1ETPO+3idmNuk3pVikJG-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2010-11-16 21:19 ` Cyril Chemparathy
2010-11-16 22:23 ` Russell King - ARM Linux
[not found] ` <20101116222340.GF21926-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2010-11-16 23:57 ` Grant Likely
2010-11-15 19:12 ` [PATCH v5 02/12] davinci: add tnetv107x ssp platform device Cyril Chemparathy
2010-11-15 19:12 ` [PATCH v5 03/12] davinci: add ssp config for tnetv107x evm board Cyril Chemparathy
2010-11-15 19:12 ` [PATCH v5 04/12] spi: add ti-ssp spi master driver Cyril Chemparathy
2010-11-15 21:59 ` Ryan Mallon
[not found] ` <1289848334-8695-5-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2010-11-16 7:22 ` Grant Likely
[not found] ` <20101116072225.GF4074-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2010-11-16 7:47 ` Grant Likely
2010-11-16 11:34 ` Mark Brown
[not found] ` <20101116113409.GH3338-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2010-11-16 20:45 ` Grant Likely
[not found] ` <20101116204554.GB5016-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2010-11-16 22:48 ` Mark Brown
[not found] ` <AANLkTi=utWumLKo9QVWXpkC8WxpgaNJJs+dj=pa2eq-q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2010-11-17 0:17 ` Cyril Chemparathy
2010-11-17 13:31 ` Mark Brown
[not found] ` <20101117133136.GA19488-HF5t3jzXg/6ND3a5+9QAFujbO/Zr0HzV@public.gmane.org>
2010-11-17 15:25 ` David Brownell
[not found] ` <781931.83221.qm-g47maUHHHF+ORdMXk8NaZPu2YVrzzGjVVpNB7YpNyf8@public.gmane.org>
2010-11-17 17:54 ` Cyril Chemparathy
[not found] ` <4CE31F0E.7050103-l0cyMroinI0@public.gmane.org>
2010-11-17 16:11 ` Grant Likely
[not found] ` <20101117161130.GC5757-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2010-11-17 17:23 ` Mark Brown
2010-11-17 17:35 ` Cyril Chemparathy
2010-11-18 5:46 ` Greg KH
2010-11-25 23:32 ` Rafael J. Wysocki
2010-11-16 14:19 ` David Brownell
2010-11-15 19:12 ` [PATCH v5 05/12] davinci: add spi devices on tnetv107x evm Cyril Chemparathy
2010-11-15 19:12 ` [PATCH v5 06/12] regulator: add driver for tps6524x regulator Cyril Chemparathy
2010-11-15 19:12 ` [PATCH v5 07/12] davinci: add tnetv107x evm regulators Cyril Chemparathy
2010-11-15 19:12 ` Cyril Chemparathy [this message]
[not found] ` <1289848334-8695-9-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2010-11-15 22:38 ` [PATCH v5 08/12] gpio: add ti-ssp gpio driver Ryan Mallon
[not found] ` <4CE1B651.1060006-7Wk5F4Od5/oYd5yxfr4S2w@public.gmane.org>
2010-11-16 19:38 ` Cyril Chemparathy
2010-11-15 19:12 ` [PATCH v5 09/12] davinci: add tnetv107x evm ti-ssp gpio device Cyril Chemparathy
2010-11-15 19:12 ` [PATCH v5 10/12] backlight: add support for tps6116x controller Cyril Chemparathy
2010-11-15 19:12 ` [PATCH v5 11/12] davinci: add tnetv107x evm backlight device Cyril Chemparathy
2010-11-15 19:12 ` [PATCH v5 12/12] davinci: add tnetv107x evm i2c eeprom device Cyril Chemparathy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1289848334-8695-9-git-send-email-cyril@ti.com \
--to=cyril-l0cymroini0@public.gmane.org \
--cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
--cc=alan-qBU/x9rampVanCEyBjwyrvXRex20P6io@public.gmane.org \
--cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \
--cc=davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org \
--cc=dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org \
--cc=lrg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org \
--cc=rpurdie@rpsys \
--cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).